Presentation on theme: "INAR 342 FINISHING. INAR 342 : FINISHING Aim of the Course This course is designed to heighten the students understanding of the rules and principles."— Presentation transcript:
INAR 342 FINISHING
INAR 342 : FINISHING Aim of the Course This course is designed to heighten the students understanding of the rules and principles of finishing for various building components, with reference to interior spaces. Basically three aspects of an interior space are covered: wall finishes, flooring, and ceiling.
Properties and implementation techniques of the following subjects will be explained: Wall Finishes plastering, painting, wall papers, plaster boards, timber boards, stones, pressed bricks, ceramic tiles, wall partitions Flooring screeds, terrazzo, ceramic tiling, wood blocks, parquet, and wood boards... Ceiling moulded ceilings, bench works and suspended ceilings.
Methodology/Classroom Procedures Each week a specific subject matter will be lectured during the first 2 hours of the class meeting. In the remaining part of the class hours, the student is required to complete a given exercise, which is normally related to the topic of the week. The student is expected to complete the studio exercise independently in the studio, while the instructors provide regular critique to her/him. If the studio exercise can not be completed during the studio hours, the student can submit the exercise untill the beginning of the next course.
Studio Drawing Exercises There will be weekly, drawing exercises for the course Finishing to be completed by each student every week, in the second part of the class, following the lecture part which normally lasts two hours from the beginning of the class meeting. Each of the design exercises (DE) is normally related to the subject that is covered in the lecture part of the class.
It is required that all of the design exercises of a student relate to the same building, which will be called here and then MASTER BUILDING. For this reason the student is required to select or develop a MASTER BUILDING of his own during the first two weeks of the semester.
The requirements that the MASTER BUILDING should fulfill are outlined below: Any design thats either previously done by the student as a course requirement, or borrowed from any source of book, magazine or builder is acceptable as long as it fulfills these requirements
Requirements for the Proposed Master Building Maximum dimensions of a floor (width and length) : – 14 – 20 Mt. Max. no of floors : 1 Practical purpose (function of bld) : – - hotel suit – - apartment house / single family house – - exhibition hall with storage, and wc units – - cocktail / dining hall with storage, and wc units – - social club house with storage, and wc units – - commercial building (shop, small office)
Requirements The requirements of the course include attendance to weekly lectures, studio exercises, midterm and final exams. The student must attend 80% of the weekly, class meetings, otherwise she/he may be dismissed of rights to be evaluated for the course. Accordingly, failure to attend the classes more than 3 times will result in receiving NG grade.
Evaluation and Grading Drawing Exercises35 % Research and Presentation20 % Class Attendance and Participation05 % Final Exam40 %
Weekly Schedule/Summary of Topics Week 1 02/03/2004 Course organization An introduction to finishing component of a building Wall, floor and ceiling finishes Proposal of a Master Building
Week 2 09/03/2004 Lime/cement plasters Mortar mixes, tools, and equipments DE 1: Floor Plans and 2 sections of master building with plastered walls; Scale: 1/50 and implementation technique of gypsum plaster with sketches
Week 3 16/03/2004 Pre-mixed gypsum plasters Paintings DE 1
Week 4 Week 4 23/03/2004 Plaster boards Submission of DE 1 DE 2: Rooms with plaster boarded walls; Requirements: Plan and a section of a room: 1/20 2 Point details: 1/5
Week 5 30/03/2004 Timber wall finishes Timber boarding and hardboard wall panels DE 3: Rooms with timber boarded walls; Requirements: Plan and a section of a room: 1/20 2 Point details: 1/5
Week 6 06/04/2004 Cladding of wall surfaces with masonry (natural / manufactured stone, and pressed / faced bricks) DE 4: Room with masonry (stone or brick) veneered walls; Requirements: Plan and a section of a room: 1/20 2 Point details: 1/5
Week 7 13/04/2004 Wall board partitions DE 5: Rooms with wallboard Partitions; Requirements: Plan and a section of a room: 1/20 2 Point details: 1/5
Week 9 27/04/2004 Screeds Marble floor and stair finishes and skirtings Ceramic tiling DE 6: Bathroom with ceramic tiled floor and wall surfaces; Requirements: Plan and a section of a bath room: 1/20 2 Point details: 1/5
Week 10 04/05/2004 Timber board, wood block and parquet floor finishes DE 6: Bathroom with ceramic tiled floor and wall surfaces; Requirements: Plan and a section of a bath room: 1/20 2 Point details: 1/5
Week 11 11/05/2004 Suspended ceilings DE 7 : Rooms with timber board or parquet floor finishes and with suspended ceiling; Requirements: Plan and a section of a room: 1/20 4 Point details: 1/5
Week 12 18/05/2004 DE 7 : Rooms with timber board or parquet floor finishes and with suspended ceiling; Requirements: Plan and a section of a room: 1/20 4 Point details: 1/5
Week 13 25/05/2004 Benchwork: Moulding techniques and materials for ceiling finishes PRESENTATIONS