Presentation is loading. Please wait.

Presentation is loading. Please wait.

Lightweight thermal insulating mortar 21 April 2010 THERMAL INSULATION TECHNOLOGY.

Similar presentations


Presentation on theme: "Lightweight thermal insulating mortar 21 April 2010 THERMAL INSULATION TECHNOLOGY."— Presentation transcript:

1 Lightweight thermal insulating mortar 21 April 2010 THERMAL INSULATION TECHNOLOGY

2 Lightweight thermal insulating mortar 21 April 2010 Politerm: a successful transfer of theory to practical Superlight inert made of EPS vergin beads preadditivated with EIA (Edilteco Insulating Additive) Suitable for the preparation of lightweight – thermal insulating mortars To be mixed with cement and water, NO SAND REQUIRED Preadditivated at the factory = constancy of use and final results

3 Lightweight thermal insulating mortar 21 April 2010 Perfect mixing with the water binder Homogeneous distribution within the mixture Light: just as low as from 200 kg/m 3 ! High thermal insulation: λ = 0,067 W/Mk Perfect pumping capacities Prevention of the polystyrene beads from floating. Politerm: a successful transfer of theory to practical POLITERM INTERMEDIATE LAYER AND PIANO ZERO (230) POLITERM ROOFING AND FCA (215) TECHNICAL DATA SHEET MANUAL OF USE

4 Lightweight thermal insulating mortar 21 April 2010 Politerm applications Thermal insulation on roofs Thermal insulation in attics Thermal insulation and lightening on floors single-layer Thermal insulation and lightening and levelling on floors intermediate layer under screed Thermal insulation for basements -single-layer -intermediate layer under screed

5 Lightweight thermal insulating mortar 21 April 2010 Politerm applications Thermal insulation, lightening and gradient formation on terraces single-layer

6 Lightweight thermal insulating mortar 21 April 2010 Politerm applications Thermal insulation, lightening and gradient formation on terraces Intermediate layer under screed

7 Lightweight thermal insulating mortar 21 April 2010 Politerm applications Thermal insulation, lightening and gradient formation on flat roofs under waterproofing layer

8 Lightweight thermal insulating mortar 21 April 2010 Politerm applications Thermal insulation, lightening and levelling intermediate layer under floor heating system

9 Lightweight thermal insulating mortar 21 April 2010 Politerm applications Thermal insulation, lightening and levelling on vaulted floors

10 Lightweight thermal insulating mortar 21 April 2010 Politerm: preparation + + POLITERM CEMENT CLEAN WATER POLITERM THE LIGHTWEIGHT THERMAL INSULATING MORTAR NO SAND IN THE MIXTURE

11 Lightweight thermal insulating mortar 21 April 2010 Cement mixer (*) (*): 200 litres packaging recommended Truck mixer (**) Politerm: preparation (**): 500 litres packaging recommended

12 Lightweight thermal insulating mortar 21 April 2010 Politerm equipment POLITERM MACHINE Suitable for mixing and pumping of lightweight mortars Capacity: 10-12 m 3 /h of mortar Tank: 1000 lt Pumping distance: 120 m horizontally and >30 m vertically Electrical power 7,5 kW – 380 V Weight: 800 kg Other versions: -With automatic dosage of water -Diesel engine HIGH PRODUCTIVITY ! TECHNICAL DATA SHEET

13 Lightweight thermal insulating mortar 21 April 2010 Politerm equipment ISOLCAP MACHINE Suitable for lightweight mortars and selflevelling mortars Capacity: 3 m 3 /hour of mortar Tank: 260 lt Pumping distance: 50 m horizontally and 25 m vertically Electrical power 6 kW – 380 V Weight: 128 kg VERSATILE AND PORTABLE ! TECHNICAL DATA SHEET

14 Lightweight thermal insulating mortar 21 April 2010 Politerm equipment POLITERM PUMP Suitable for pumping of premix lightweight mortars Capacity: 500 litre/minute Tank: 200 lt Pumping distance: 120 m horizontally and 60 m vertically Electrical power: 7,5 kW – 380-220 V Weight: 300-350 kg POWERFUL AND RELIABLE ! TECHNICAL DATA SHEET

15 Lightweight thermal insulating mortar 21 April 2010 Politerm equipment POLITERM BLOW READY MIX Suitable for blowing of Politerm into the truck mixer Capacity: 750 litre/minute Tank: 760 lt Pumping at 4 m high Electrical power: 0,75 kW – 380 V Weight: 300 kg PRACTICAL AND QUICK !

16 Lightweight thermal insulating mortar 21 April 2010 Politerm based Readymix products VERTICAL WALLS AND CEILING HORIZONTAL INSULATION AND LIGHTENING

17 Lightweight thermal insulating mortar 21 April 2010 Readymix: vertical walls and ceilings ISOLTECO Lightweight and Highly thermal insulating plaster Composition: EPS virgin beads and special additives λ = 0,058 W/m°K Density: 150 kg /m 3 Compressive resistance: 1,07 N/mm 2 μ = 12,67 Sound insultaion: 7dB at 6 cm thickness Application: with plastering machine TECHNICAL DATA SHEET MANUAL OF USE

18 Lightweight thermal insulating mortar 21 April 2010 4. Thermal insulation in-between walls 5. Internal thermal insulation 1.Thermal insulation on ceiling 2.External thermal insulation 3.Elimination of thermal bridges ISOLTECO SUITABLE FOR THE INSULATION OF: 1.CEILING 2.EXTERNAL WALLS 3.ELIMINATION OF THERMAL BRIDGES 4.IN-BETWEEN WALLS* 5.INTERNAL WALLS *ISOLTECO WALL (0,42 N/mm 2 ) Readymix: vertical walls and ceilings

19 Lightweight thermal insulating mortar 21 April 2010 ISOLSAN Dehumidifying plaster, lightweight and with high thermal insulating properties Composition: EPS virgin beads and special additives λ = 0,068 W/m°K Density: 230 kg /m 3 Compressive resistance: 1,28N/mm 2 μ = 9,0 Bag: 60 lt yeld Application: with plastering machine Readymix: vertical walls and ceilings TECHNICAL DATA SHEET MANUAL OF USE (Isolteco)

20 Lightweight thermal insulating mortar 21 April 2010 1.Thermal insulation on ceiling 2.External thermal insulation 3.Elimination of thermal bridges 5. Internal thermal insulation ISOLSAN SUITABLE FOR THE INSULATION OF: 1.CEILING 2.EXTERNAL WALLS 3.ELIMINATION OF THERMAL BRIDGES 5.INTERNAL WALLS Readymix: vertical walls and ceilings

21 Lightweight thermal insulating mortar 21 April 2010 Isolteco (Isolsan): preparation + ISOLTECO (ISOLSAN) CLEAN WATER THERMAL INSULATING PLASTER ISOLTECO (44 e 440)

22 Lightweight thermal insulating mortar 21 April 2010 Isolteco (Isolsan): preparation CEMENT MIXER MIXING (Manual application) MIXING AND PUMPING (mechanical application) PLASTERING MACHINE HELICOIDAL FULL BLADE 30 LT ROTOR-STATOR

23 Lightweight thermal insulating mortar 21 April 2010 Readymix: horizontal insulation and lightening

24 Lightweight thermal insulating mortar 21 April 2010 Thermal insulation on roof Lightweight single layer screed with slope creation Lightweight single layer screed for terraces and balcony Lightweight, thermal insulating underfloor layer Lightweight thermal insulating layer on wood slab Lightweight thermal insulating layer under heating floors Lightweight thermal insulating single layer for cercamic screed Levelling and lightweight filling for thermal insulation of vaults ceilings Readymix: horizontal insulation and lightening

25 Lightweight thermal insulating mortar 21 April 2010 ISOLCAP FEIN ISOLCAP SPEED ISOLCAP XX ISOLCAP MAX Feature Underscreed layer Single layer screedFast dryingReinforced with polypropilene fibres for improved mechanical resistance High compression resistance Density 250 kg/m 3 300 kg/m 3 400 kg/m 3 500 kg/m 3 800 kg/m 3 Thermal conductivity 0,067 W/m°K0,087 W/m°K0,095 W/m°K0,104 W/m°K0,176 W/m°K Compressive strenght 0,83 N/mm 2 1,61 N/mm 2 1,48 N/mm 2 2,24 N/mm 2 4 N/mm 2 μ 11,51221,04 - NOTE: direct application of ceramic tile= 96 h wooden floor=7 days ceramic tile= 24 h wooden floor=48 h ceramic tile= 96 h wooden floor=5 days ceramic tile= 96 h wooden floor=5 days Readymix: horizontal insulation and lightening

26 Lightweight thermal insulating mortar 21 April 2010 POLITERM: SUMMARY OF MAIN ADVANTAGES Using a higher performance material means obtain savings in terms of: Material consumption Weight Space (reduced thickness) Time Furthermore, due to its lightness, it contributes to considerably reduce the earthquake effect at the buildings

27 Lightweight thermal insulating mortar 21 April 2010 We warmly Thank You for your attention Grazie THERMAL INSULATION TECHNOLOGIES


Download ppt "Lightweight thermal insulating mortar 21 April 2010 THERMAL INSULATION TECHNOLOGY."

Similar presentations


Ads by Google