1. 25.aug.2003 A selection of level sensors made in stainless steel

2. Level sensor type S3 Replace Type S2 and W2 Material: 316 stainless steel. 1 ¼ BSP threads for assembly in tank. For level measurement, all characteristics can be made available. For fuel and water

3. Level sensor type S5 Replace Type TR Material: 316 stainless steel. Standard 5-hole flange for assembly in tank. For level measurement, all characteristics can be made available. For fuel and water.

4. Level sensor type SD Replace type TRD Material: 316 stainless steel. Standard 5-hole flange for assembly in tank. For level measurement, all characteristics can be made available. Damping tube gives stable reading on non damped gauges. For fuel, water and holding tanks

5. Level sensor type TN Material: 304 stainless steel Standard bayonet fitting for assembly in tank. For level measurement, all characteristics can be made available. Tubes for suction and return of fuel Option: Filter Option: Air vent pipe. On request: Material in 316 stainless steel.

6. Fuel sensor type TB Material: 304 stainless steel Standard bayonet fitting for assembly in tank. For level measurement, all characteristics can be made available. Tubes for suction and return of fuel Option: Filter (as shown) Option: Air vent pipe. On request: Material in 316 stainless steel.

7. Options All our sensors can be custom made in terms of: Filter and filter position. Dimensions of tubes Lengths Characteristics (Ohm) Cable length and type Electrical connections

8. Level sensor type TU Material: Sensor head made in PA-GF30 (Nylon, reinforced with glass fiber), tube in 316 stainless steel. Standard bayonet fitting for assembly in tank. For level measurement, all characteristics can be made available. For AdBlue, fuel and water

9. Sensor type TZ AdBlue sensor in 316 stainless steel and PA-GF30 Suction/return AdBlue, level indication, tubes for water heating and ventilation

10. Cover with M16x1.5 threads Material: Made in PA- GF30 (Nylon, reinforced with glass fiber. Standard bayonet fitting for assembly in tank. M16 threads for standard fittings (Air ventilation or connection to second tank) Standard color: black

11. Cover Material: Made in PA- GF30 (Nylon, reinforced with glass fiber. Standard bayonet fitting for assembly in tank. Standard color: black