SportPort Athletic Equipment Storage Systems Developed by: Kenton Schram – Owner Besben Inc. 10331 – 56 Street, Edmonton, AB T6A 2J3 Phone: 780-232-4810 Email: firstname.lastname@example.org@shaw.ca
SportPort Systems - Why? SportPort Systems - developed to address three problems common to storing equipment: 1.Odour/Health Commonly known as Locker Room Odour Fungi & Bacteria growth can pose a health risk 2.Clutter The contents of a hockey bag take up scarce garage or basement floor space 3.Ambivalence Family athletes, commonly drop their gear wherever it lands when they arrive home
1 - Odour & Health The Cause: – Published research papers reveal perspiration soaked athletic apparel promotes growth of fungi and bacteria which: Yield unpleasant odours Pose health risks Lead to premature equipment deterioration The Simple Solution: – Spread equipment out to promote air circulation to: Completely dry equipment immediately after use Inhibit the growth of biologicals
2 - Clutter The Problem: – Few families have specialized equipment storage systems Existing systems are primarily floor based occupying scarce basement or garage floor space Equipment stored in multiple locations can be forgotten on game day The Solution: – SportPort Systems Wall mounted on finished wood stud walls Custom hanger brackets accept equipment to open & distribute it promoting rapid drying – Keeps everything in one place for easy access; hockey version accommodates: skates, pads, helmet, pants, gloves & sticks
3 - Ambivalence The Problem: – Competitive Systems are utilitarian in design Equipment hangs in haphazard manner Awkward to fill and retrieve from Unappealing to look at full or empty The Solution: – SportPort Sport Specific Wall Mounted Systems – Appealing award or crest shape – Specially designed hangers for every piece of gear
Working Prototype Package Dimensions – Height 24 – Width 24 – Thickness 2 ½ Graphics – Front Board with equipment – Back Package Contents Assembly Directions (Finished versions will be fully bilingual)
Working Prototype Back As Packaged Hanger brackets nested in back of board inside package Note 2-screws on the vertical centerline for mounting.
Assembled Working Prototype with Hanger Brackets Assembly Includes: – Base Board – Attached Snap-in hanger brackets
Working Prototype - with Gear Equipment Accommodated – Top 1-Helmet 1-Pair Gloves – Centre 1-Set Shin Pads 1-Set Elbow Pads 1-Pair Skates 2-Sticks – Bottom 1-Pants 1-Shoulder Pads
Thank You for Your Interest For Further Information Please Contact Besben Inc. Kenton Schram - Owner 10331 – 56 Street, Edmonton, AB T6A 2J3 Phone: 780-232-4810 Email: email@example.com@shaw.ca
Your consent to our cookies if you continue to use this website.