1. <month year>
doc.: IEEE /119
September, 2003
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: [Proposed Technical Requirements for mm-Wave WPAN ]
Date Submitted: [ 15 September 2003]
Source: [Yuichi Shiraki]
Company [Oki Electric Industry Co., Ltd.]
Address [3-4 Hikari-no-oka, Yokosuka, Kanagawa , Japan]
Voice:[ ]
Fax :[ ]
Re : []
Abstract:[Description of Proposed technical requirements for mm-Wave WPAN ]
Purpose:[Contribution for millimeter-wave interest group ]
Notice :This document has been prepared to assist the IEEE P It is offered as a basis for
discussion and is not binding on the contributing individual(s) or organization(s). The material in
this document is subject to change in form and content after further study. The contributor(s)
reserve(s) the right to add, amend or withdraw material contained herein.
Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE
and may be made publicly available by P
Yuichi Shiraki Oki
Reed Fisher, Oki

2. Proposed Technical Requirements for mm-Wave WPAN
September, 2003
Proposed Technical Requirements for mm-Wave WPAN
Yuichi Shiraki Oki

3. mm-Wave WPAN System PHY Requirements (1)
<month year>
doc.: IEEE /119
September, 2003
mm-Wave WPAN System PHY Requirements (1)
TG3a Alt-PHY Technical Requirements
(IEEEP /371)
mm-Wave WPAN System
480Mbpsor more (range not specified)
Several for Point to Point
Bit Rate and Range
Transmission EIRP
Less than Regulatory emission level
Less than Regulatory emission level
Coexistence and
Interference Resistance
Coexistence with other 802, Bluetooth,etc
Robustness in multipath (indoor)
Uncomplicated coexistence with other 802 systems including TG3a , Bluetooth,etc
Coexistence among mm-Wave System
Robustness in multipath (indoor)
Channel model
Specified by IEEE P /368
To be specified with experimental
investigations
Yuichi Shiraki Oki
Reed Fisher, Oki

4. mm-Wave WPAN System PHY Requirements (2)
<month year>
doc.: IEEE /119
September, 2003
mm-Wave WPAN System PHY Requirements (2)
TG3a Alt-PHY Technical Requirements
(IEEEP /371)
mm-Wave WPAN System
100mW or
250mW or
Power save function
To be specified
Power consumption
Capable of fitting into a form factor
consistent with a camera,PDA,etc
Capable of fitting into a form factor
consistent with a camera,PDA,etc
Form factor
Complexity
Minimal to enable mass commercial
adaptation for cost sensitive products
Minimal to enable mass commercial
adaptation for cost sensitive products
Supplements to functionality
Alt-PHY operates with the MAC
without fundamental changes.
(Supplements can be added which
expand the capability of the system.)
Alt-PHY operates with the MAC
without fundamental changes.
Yuichi Shiraki Oki
Reed Fisher, Oki

5. mm-Wave WPAN System PHY Requirements (3)
<month year>
doc.: IEEE /119
September, 2003
mm-Wave WPAN System PHY Requirements (3)
TG3a Alt-PHY Technical Requirements
(IEEEP /371)
mm-Wave WPAN System
Comply with necessary geopolitical or
regional regulations
Comply with necessary geopolitical or
regional regulations
Regulatory
Other item
directionality of antenna
Assumption of Omni-directional antenna
No exclusion of directional antenna
if needed to mitigate specific user problems
Yuichi Shiraki Oki
Reed Fisher, Oki

6. <month year>
doc.: IEEE /119
September, 2003
Conclusion
Proposed mm-Wave WPAN technical requirements have been presented.
More detailed specifications will be presented at the next
mmWIG meetings
Yuichi Shiraki Oki
Reed Fisher, Oki