Presentation on theme: "Nanoscience in Nature Or Why Dont Water Striders Get Wet? and Other Burning Questions By Jeannie Nye and Andrew Greenberg Lake Mills Middle School And."— Presentation transcript:
Nanoscience in Nature Or Why Dont Water Striders Get Wet? and Other Burning Questions By Jeannie Nye and Andrew Greenberg Lake Mills Middle School And University of Wisconsin-Madison
So, Why Dont Water Striders Get Wet? Water striders are able to walk on water for a number of reasons. Striders are assisted by five things: surface area gravitational forces surface forces (van der Waals force) a waxy (hydrophobic) surface on their legs And most important - The microhairs on their feet are nano-groovy ! Microhairs Nanogrooves on microhairs Tell me more! (Click here.) Tell me more!
Sure they are! If, by chance, the water strider did break the water tension and take a plunge, it would not be able to dry off with a bug-sized towel. At this size, surface adhesion forces (van der Waals force) would keep the towel stuck to the water strider. Besides, the water strider could put on a bathing suit for it's dip; and it would never have to worry about the suit coming off when it hit the water during a high dive. First, because its so small, the water strider would float gently down because the frictional forces acting upon the water striders surface overcome the weak influence of gravity at this size. Also adhesion forces would keep the suit on the strider for life. It would also be impossible for the bug to read a book by the pool, since once the pages were scaled down to bug-size, surface adhesion would keep the pages stuck together. Surface Forces and Gravity are Important to the Water Strider. More information can be found on the web at Activities can be found at orhttp://www.lessonplanspage.com/ScienceExAddPenniesToFullGlassMO68.htm
Nano-groovy Hair Water striders have remarkable non-wetting legs that enable them to stand and move quickly on water! Each leg is covered with large numbers of angled tiny hairs (microsetae) with tiny nanogrooves. Air is trapped in spaces in the microsetae and nanogrooves to form a cushion where the leg touches the water. This prevents the leg from getting wet. This arrangement allows water striders to survive on water even if they are being bombarded by raindrops. When it rains the strider bounces to avoid being drowned. 57FEDC4E4B26CDD00E3822BFEA963D7 a. The illustration: a. A dimple of water in which a spider foot stands. b. Scanning electron microscope image (at 20µm) of a leg showing numerous spindly microsetae. c. Nanoscale grooved structures on a seta (at 200nm scale on an SEM).
Sticky Spider Toes These are the single hairs (setae) that make up the tuft of hair on the bottom of a jumping spiders foot. The oval represents the approximate size of the foot magnified to 270x. This picture, magnified 8750x, shows the very dense nanosized setules on the underside of just one of those many seta (hairs) shown in the picture above. Tell me more! Water strider toes help keep it dry, but this spiders toes help make him sticky!
Spider Toes Check out this jumping spiders foot. Jumping spiders use nanoscale structures, too! Below thicker hairs on this spiders leg are the nanoscale fibers that look like toes. These fibers are on the bottom of the spider's leg, and each individual hair is covered in more hairs. These smaller hairs are called setules. Because these setules are so small they can use van derWaals force to make the spider stick to surfaces. The van der Waals force acts between individual molecules that are within a nanometer of each other (about ten thousand times smaller than the width of a human hair.) What makes the van der Waals force an interesting form of adhesion is that, unlike many glues, the surrounding environment does not affect it. The only thing that affects it is the distance between the objects (in this case, setules and the surface). These nanofibers are small enough that the van de Waals force create a very high degree of waterproof, grease-proof, dirt-proof stickiness. When all 600,000 tips are in contact with a surface the spider can produce an adhesive force of 170 times its own weight. That's like Spiderman clinging to the flat surface of a window on a building by his fingertips and toes only, while rescuing 170 adults who are hanging onto his back! The total van der Waals force on the spider's feet is very strong, but since it is due to many very small forces on each molecule the spider can lift its leg so that the nanosized setules are lifted successively, not all at once. It doesnt need to be strong to do that. Spider leg Hairy toe Setules on one hair
Lots of nano-toes! Beetles and flies also have nanostructures that help them stick to walls, ceilings and what appear to be smooth surfaces. Tell me more!Tell me more!
Tribology is the study of friction, lubrication and wear. When applied to living organisms this study is called bio-tribology. Tribology Why do you think these nanostructures on my toes are important in biotribology?
How sticky? As sticky as a … 500,000 hairs per toe Hundreds of nanoprojections (spatulae) per hair Adhesive force in one foot = 100 newtons One dime-sized spot could lift a child weighing 45 pounds. Tokay Gecko Stats: If their feet are that sticky, how do they pick up their feet? Gecko?
How Can a Gecko Lift Its Foot Off of a Surface? These lizards uncurl their toes like a paper party favor whistle when putting their feet down and peel the toes back up as if removing a piece of tape when they step away.
How strong? As Strong as… Silk? The nanometer-sized biodegradable threads of spider silk are stronger, by weight, than high-tensile steel. It is also elastic enough to stretch up to 10 times its initial length.
Toucan Beaks - Strong and Light The exterior of the toucan beak is made up of overlapping nanosized tiles of keratin, the same protein that makes up hair, fingernails, and horn. an.html The interior of the beak is a rigid foam made of a network of nanosized bony fibers connected by membranes. This allows the beak to absorb high-energy impacts. Keratin tiles glued together Foam-like interior made of bony fiber and drum-like membranes el&qc=ev3rel
Nature uses Light on the Nanoscale
What Makes Color? There are three possible reasons for color: 1.One reason is pigment. If color is due to pigment, the color never changes. For example, a bluejay is always blue. Though pigment isnt based on nanoscience, the next two examples of ways to create color are based on nanoscience.
Or Could Color Be Nanoscopic? 2. The colors of beetle and butterfly wings come from the scattering of light. Light hits the nanostructures on their scales. These nanostructures are typically smaller than the wavelengths of visible light (smaller than 400 nanometers, for example). Tell me more! (weblink) These nanostructures dont just make me pretty. They also keep me clean by shedding water and dirt!
Color Can Be Iridescent, Too! Thin films are made of nanoparticles, smaller than 400 nanometers, that produce iridescent (rainbow-like) colors when light strikes them. Iridescent colors change when you look at the object from different angles. Tell me more! (weblink) 3.The third reason for color is the interference of different wavelengths of light (like oil on water).
Squid Lights on a Nanoscale First, it has a light-producing organ on its underside. How does it produce light? Why, it contains bacteria that produce luminescent light on the nanoscale. Secondly, the squid has stacks of silvery nanoplatelets made of proteins behind the tissue to reflect the light downward from the squid. The light prevents it from casting a shadow when seen from above or forming a silhouette when seen from below. Would somebody turn on the lights, please? The Hawaiian bobtail squid uses a two part process to hide from predators at night.
You Light Up My Life or Bioluminescence Basics Bioluminescence in fireflies is nanoscale. The glow is caused by the exciting of electrons by a fireflys enzyme. When the electrons quiet down and go back to their stable state, they give off light. They glow to attract mates and communicate. Whats an enzyme? Angler fish use bioluminescent lures to attract fish.
A Blue Light Special Tiny crustaceans, Ostracods, also known as "seed shrimp" or "sea fireflies," also use this enzyme to produce bioluminescence in courtship. The males produce blue dots in the water, which are used to attract mates. A close-up using a scanning electron microscope
Jellyfish Lights A jellyfish-type invertebrate, called a siphonophore, uses red bioluminescent lures created at the nanoscale to attract prey. Doesnt it seem odd that it would use red light since red isnt easily visible underwater? Click here for a weblink to a video and lesson on bioluminescent deep sea organisms.
Bioluminescence Lesson Theres an interesting, though high level, video clip at um_content.html um_content.html NSTA provides a lesson on bioluminescence. It can be found at cope.php?category_ID=87&news_story_ID= cope.php?category_ID=87&news_story_ID=52197
Hippo Sweat is Nanoscience? Hippo sweat contains compounds that absorb light in the range of 200 – 600 nanometers. This compound protects the hippos skin like sunscreen. One of the compounds in hippo sweat, hipposudoric acid, inhibits bacterial growth and is hydrophilic, too. Can you think of ways the hippo benefits from these properties?
Get Ready, Get Set, Drink! Imagine youre a very thirsty tiny beetle in a desert. How can you get a drink? The Namib desert beetle in the deserts of southwest Africa has a novel idea. First it must collect drinking water using its wings, which are waxed and covered with raised unwaxed nanobumps. The bumps attract water (hydrophilic). When enough water collects it rolls down the waxy areas, which repel water (hydrophobic), into the beetles mouth. Click here for more information! A closeup of the nanobumps on a beetles back.
But How Does the Water Get to Its Mouth? Six times a year when the fog blows in from the Atlantic the Namib beetle turns a 45 degree angle to the wind so that the droplets of water from the fog stick to the unwaxed bumps on its back. This water builds up before rolling down the water- repelling waxed troughs on the beetle's back and into its mouth.
Speaking of Water… Lets Look at Snowflakes! Have you ever looked closely at a snowflake and wondered why theyre all different?
For more information click on the following link: htm htm Its Because Theyre Nano-Flakes! They build up on the nanoscale, one molecules at a time. Their size and shape is determined by the altitude and air pressure where they are formed. Use the same bottom up construction to make your own snowflakes by clicking on this web link: e/makesnow.html e/makesnow.html
Nanoscience Is Everywhere in Nature Living cells have been using their own nanoscale devices to create structures one atom or molecule at a time for millions of years. To be specific, DNA is copied, proteins are formed, and complex hormones are manufactured by cellular devices far more complex than the most advanced manufacturing processes we have today. Click here for an example!
Mighty Oaks from Little Acorns Grow For example, an acorn uses the energy within it to read nanoscale DNA. The DNA is coded to sprout roots and leaves. These structures can gather more energy from the soil and the sun. The DNA tells the acorn to rearrange the atoms in soil, air and water to produce an oak tree, a material far more complex than today's material science can produce.
Mother Nature Mankind has always found inspiration in Mother Nature. Today developing technologies allow us to probe and better understand the nanoscience of Mother Nature.