Presentation is loading. Please wait.

Presentation is loading. Please wait.

Avnet/Xilinx HDMI FMC Card - Using ADV7511 - Please verify the following waveforms – Written using verilog – Simulations of each transition point – Using.

Similar presentations


Presentation on theme: "Avnet/Xilinx HDMI FMC Card - Using ADV7511 - Please verify the following waveforms – Written using verilog – Simulations of each transition point – Using."— Presentation transcript:

1 Avnet/Xilinx HDMI FMC Card - Using ADV Please verify the following waveforms – Written using verilog – Simulations of each transition point – Using Avnet HDMI FMC Card Schematics: 4:2:2, 16-bit, left justified

2 Avnet FMC Card Schematic

3 Out of Reset EAV Blanking: 130 Clocks

4 SAV Blanking: 130 Clocks EAV(4) + Blanking(130) + SAV(4) = 138 Clocks Data

5 End of Data Line EAV Blanking: 130 Clocks End of Data NOTE: HCntr is shifted by 1 clock due to 2 different state machines, but counts 0-857

6 Vertical Timing: Start of Active Video Lines ** Using figure 4.13 exactly: 0-44 = blanking : Video 524: Blanking


Download ppt "Avnet/Xilinx HDMI FMC Card - Using ADV7511 - Please verify the following waveforms – Written using verilog – Simulations of each transition point – Using."

Similar presentations


Ads by Google