Presentation is loading. Please wait.

Presentation is loading. Please wait.

Goodtool Brake Service Tools and Supplies Quick Chuck.

Similar presentations


Presentation on theme: "Goodtool Brake Service Tools and Supplies Quick Chuck."— Presentation transcript:

1 Goodtool Brake Service Tools and Supplies Quick Chuck

2 Goodtool Brake Supplies Phone: Quick Chuck Self centering system Will mount on any Brake Lathe with a 1 arbor Eliminates mounting problems with the unique self centering system No use of cones or bell clamps Fits hubless rotors and drums, and composite rotors and drums Fits most foreign and domestic rotors, drums and flywheels including light trucks with a centering hole ranging from 2-1/8 to 5 -3/4 in diameter 25% less set up time, accurate microfinish and reduces chatter. Fits on small automotive to large truck rotors Will mount on any Brake Lathe with a 1 arbor Eliminates mounting problems with the unique self centering system No use of cones or bell clamps Fits hubless rotors and drums, and composite rotors and drums Fits most foreign and domestic rotors, drums and flywheels including light trucks with a centering hole ranging from 2-1/8 to 5 -3/4 in diameter 25% less set up time, accurate microfinish and reduces chatter. Fits on small automotive to large truck rotors

3 Goodtool Brake Supplies Phone: Go From all this… To just this…

4 Goodtool Brake Supplies Phone: Step One Thoroughly clean the surface of the rotor or drum that will be mounted on the Quick Chuck. ( Step 1A & 1B) Step 1A Step 1B

5 Goodtool Brake Supplies Phone: Step 2 Place the hubless rotor or hubless drum on a clean, flat surface. Attach your hubless rotor or drum to the Quick Chuck by positioning the Quick Chuck with the jaws in the center hole.

6 Goodtool Brake Supplies Phone: Step 2B Tighten the jaws by inserting the key into one of the key slots in the side of the chuck, turning counterclockwise. The Quick Chuck will automatically self-center the rotor or drum. Make sure that the chuck jaws are tight. DO NOT leave the key in the key slot when starting the brake lathe.

7 Goodtool Brake Supplies Phone: Step 3A Install the backing plate onto the brake lathe arbor with offset backing outward.

8 Goodtool Brake Supplies Phone: Step 3B Mount the Quick Chuck with drum or rotor installed onto the 1" arbor

9 Goodtool Brake Supplies Phone: Step 3C Using the spacers supplied with the brake lathe, add as many as needed to reach the arbor threads

10 Goodtool Brake Supplies Phone: Step 3D Using the adjusting nut supplied with the machine, tighten the nut against the spacers. After tightening the Quick Chuck, turn on the brake lathe to check for run-out of the rotor or drum. Run-out spec. is.001 You are now ready to resurface the rotor or drum.

11 Goodtool Brake Supplies Phone: This job can be done quickly and will eliminate customers complaints of rotors or drums saving you time and making you money.

12 Goodtool Brake Supplies Phone: SPECIAL NOTE: The Quick Chuck will allow the turning of hubless rotors and drums to be performed on any brake lathe with an 1 arbor. Ammco Twin Cutters Ammco HD Accu-Turn Bean Bear FMC Hoffman RJ West Horvath Hunter Kwik-Way Performance Pro-Cut RTISnap-On StarVan Norman Rels VBG

13 Goodtool Brake Supplies Phone: Important – Please note ALWAYS use the largest possible backing plate. This will help eliminate the rotor or drum vibration while being turned. On some brake lathes, a small spacer may be needed before the installation of the backing plate.

14 Goodtool Brake Supplies Phone: *Do not use air tools on the unit at any time.

15 Goodtool Brake Supplies Phone: NOTE: THE CLEANING OF THE CHUCK. When the jaws have been removed it allows for cleaning of the Chuck (the jaws are numbered on the side as 1, 2, 3) it is VERY IMPORTANT that they be reinstalled in the same manner that they were removed. Reinstall in the order of (counterclockwise). A slight amount of pressure may be required on each of the jaws to allow them to be reinstalled evenly and correctly. (Figure 1 & 2 below) 1 294

16 Goodtool Brake Supplies Phone: Automotive Quick Chuck Parts GT Automotive Chuck Adaptor Kit Kit includes Quick Chuck Adaptor Automotive Jaws Range of 2-1/8 to 3-3/4 Standard Backing Plate 5.2 OD Chuck Key Replacement parts GT Quick Chuck Adaptor w/ Jaws GT Replacement Automotive Jaws 2-1/8 to 3-3/4 GT Standard Backing Plate 5.2 OD GT Chuck Key GT Automotive Chuck Adaptor Kit Kit includes Quick Chuck Adaptor Automotive Jaws Range of 2-1/8 to 3-3/4 Standard Backing Plate 5.2 OD Chuck Key Replacement parts GT Quick Chuck Adaptor w/ Jaws GT Replacement Automotive Jaws 2-1/8 to 3-3/4 GT Standard Backing Plate 5.2 OD GT Chuck Key Fits 1 Arbors

17 Goodtool Brake Supplies Phone: Truck Quick Chuck Parts GT Truck Chuck Adaptor Kit (can be used for automotive applications) Kit includes Quick Chuck Adaptor Automotive Jaws Range of 2-1/8 to 3- 3/4 Truck Jaws Range of 3-3/4 to 5-3/4 Truck Backing Plate 7-1/4 OD Standard Backing Plate 5.2 OD Chuck Key Replacement parts GT Quick Chuck Adaptor w/ Jaws GT Replacement Automotive Jaws range of 2-1/8to 3-3/4 GT Large Jaw Set range of 3-3/4 to 5-3/4 GT Truck Backing Plate 7-1/4 OD GT Standard Backing Plate 5.2 OD GT Chuck Key GT Truck Chuck Adaptor Kit (can be used for automotive applications) Kit includes Quick Chuck Adaptor Automotive Jaws Range of 2-1/8 to 3- 3/4 Truck Jaws Range of 3-3/4 to 5-3/4 Truck Backing Plate 7-1/4 OD Standard Backing Plate 5.2 OD Chuck Key Replacement parts GT Quick Chuck Adaptor w/ Jaws GT Replacement Automotive Jaws range of 2-1/8to 3-3/4 GT Large Jaw Set range of 3-3/4 to 5-3/4 GT Truck Backing Plate 7-1/4 OD GT Standard Backing Plate 5.2 OD GT Chuck Key Fits 1Arbors

18 Goodtool Brake Supplies Phone: Other Optional Parts GT Small Automotive Backing Plate Plate 4-1/4 OD GT Toyota Backing Plate 6-1/4 OD (Each sold separately not included in any kits) GT Small Automotive Backing Plate Plate 4-1/4 OD GT Toyota Backing Plate 6-1/4 OD (Each sold separately not included in any kits)

19 Goodtool Brake Supplies Phone: Goodtool Brake Service Tools and Supplies Quick Chuck Any questions on the Quick Chuck : please contact us Toll Free: Phone: Fax: Quick Chuck Any questions on the Quick Chuck : please contact us Toll Free: Phone: Fax:


Download ppt "Goodtool Brake Service Tools and Supplies Quick Chuck."

Similar presentations


Ads by Google