Presentation is loading. Please wait.

Presentation is loading. Please wait.

AQ 200 series Protection IED platform, product release 1.

Similar presentations


Presentation on theme: "AQ 200 series Protection IED platform, product release 1."— Presentation transcript:

1 AQ 200 series Protection IED platform, product release 1

2 AQ 200 series – first release products AQ F201 – Overcurrent and earth-fault relay AQ F210 – Feeder protection IED AQ M210 – Motor protection IED AQ V211 – Voltage protection IED AQ F215 – Feeder protection IED AQ M215 – Motor protection IED AQ S214 – Alarm and indication IED AQ S215 – Bay control IED

3 AQ 200 series – key benefits Genuinely modular software and hardware platform Logistics benefits for stocking, replacement, upgrades and maintenance Reduced life cycle cost in terms of training, engineering, operation and spare parts Application specific productization

4 AQ 200 series – key benefits cont. Performance Powerful 3 CPU system - separation of protection, I/O and communication tasks 64 samples per cycle sampling rate Instant protection operation time typically <20ms 60MB memory allocated for DR and user files >100 disturbance records in Flash memory > events in Flash memory

5 AQ 200 series – key benefits cont. Wide measurement ranges Operating frequency band of 6…75Hz Phase current measurement range from10mA to 250A Coarse residual current I01 measurement range from 1mA to 150A Fine residual current I02 measurement range from 0.1mA to 75A Voltage measurement 0-460V (RMS) Protection algorithms design Versatile setting alternatives Harmonic overcurrent stage based on 2 nd / 3 rd / 4 th / 5 th / 7 th harmonic Compensated cable-end differential protection Integrated arc protection Fast operation times

6 AQ 200 series – key benefits cont. Measurement accuracy Class 0.2 over frequency range of 6-75Hz !! Measurement error with fixed 50Hz sampling frequency when frequency changes. Constant current of 5A, frequency sweep from 6 Hz to 75 Hz Conventional measurementArcteq patented frequency tracking algorithm Measurement error with frequency tracking when frequency changes. Constant current of 5A, frequency sweep from 6 Hz to 75 Hz

7 Sensitive cable end differential protection Normal measurement without compensation Fault seen by IED, with compensated measurement Proactive protection!

8 AQ 200 series – key benefits cont. Superior usability Easy to use and simple to set Large customizable HMI with full language support and clear indication windows Extensive log information including complete user history register (e.g. setting change tracking) Downloading of files to relay memory (commissioning report, manual…)

9 AQ 200 series – common characteristics 5 CT inputs as standard 3 phase currents (1/5 amps software settable) Io1 (1/5A software settable) Io2 (0.2/1A software settable) Wide setting ranges 0.1…40 x In (phase overcurrent) 0.005…40 x In (earth-fault) DT, IEC or ANSI time/overcurrent curves with settable release delays 8 setting groups available Freely software settable digital input threshold voltage Measurement of up to 31 st harmonic and THD Measurement accuracy %

10 AQ 200 series – common characteristics cont. Logic programming On-line indication of active/de-active signals Program cycle 5ms for fast protection logic 16 programmable LEDs MIMIC display with up to 5 controllable devices IEC 61850, IEC 103 and Modbus protocols as standard (DNP 3 and IEC 101/104 and SPA under development) AQtivate 200 freeware software suite for all settings and configuration AQview freeware software for disturbance recorder analyzing

11 AQ 200 series – AQtivate 200 software suite Free of charge Easy to use Ethernet connection to IED On-line / Off-line modes Clear Menu structure Instant download of settings All IED settings < 1 second Logic programming feature Templates / macros MIMIC Diagram Communication parameters AQview software module for disturbance recorder analysis

12 AQ 200 series - modular platform

13 AQ 200 series – modern platform Computing power designed for needs far ahead Modern high-performance multi-CPU system

14 AQ 200 series Developed algorithms are thoroughly tested and optimized in development phase in PC environment. Child diseases can be found in very early phase. Function development from idea to product is extremely fast. Modern R&D environment

15 AQ 200 series Easy and modern HMI - Custom displays - User editable menus - Local language - Consistent and modern HMI and PC tools

16 Easy and modern HMI System LED:s 4 (fixed function) Direct CB control Local Ethernet port for PC programming Local panel HMI buttons for setting and using the relay 16 user programmable LED:s Large freely configurable display AQ 200 series

17 AQ 200 series – applications Feeder protection and control Arc protection Motor protection and control Alarm annunciation & I/O extension Bay control Transformer protection Generator protection Power monitoring etc.

18 AQ F201 – Overcurrent and earth-fault relay 3 stages o/c (50/51) 3 stages e/f (50/51N) REF, high-impedance (87N)* 1 Neg. seq. balance stage (46) 1 Harmonic overcurrent stage (50/51h) CBFP (50BF) 3 Digital inputs 6 Output relays RJ 45 and RS 485 comms Modbus, IEC 103 protocols * Requires external resistors (e.g. Metrosil)

19 AQ F210 – Feeder protection IED 4 stages o/c (50/51) 4 stages e/f (50/51N) REF low or high*-impedance (87N) or cable end differential protection 4 Neg. seq. balance stages (46) 4 Harmonic overcurrent stages (50/51h) Cable thermal protection (49) Autoreclose (79) CBFP (50BF) 3 Digital inputs (standard) 6 Output relays (standard) RJ 45 and RS 485 comms (standard) IEC 61850, Modbus, IEC 103 protocols Optionally available: 4 xI/O card slots (8DI / 5DO / 2xfiber Ethernet / arc protection) * Requires external resistors (e.g. Metrosil)

20 4 stages o/c (50/51) 4 stages e/f (50/51N) 4 Neg. seq. balance stages (46) 4 Harmonic overcurrent stages (50/51h) Cable end differential protection Motor thermal protection (49M) Locked rotor / start-up supervision (48) Speed switch (14) Frequent starts (66) Undercurrent (37) Mechanical jam (51M) CBFP (50BF) 3DI (standard) 6DO (standard) RJ 45 and RS 485 comms (standard) IEC 61850, Modbus, IEC 103 protocols Optionally available: 4xI/O card slots (8DI / 5DO / 2xfiber Ethernet / arc protection) - AQ M210 – Motor protection IED

21 4 stages overvoltage (59) 4 stages undervoltage (27) 4 stages residual overvoltage (59N) 8 stages over/under frequency (81U/O) CBFP (50BF) Fuse failure (60) 3DI (standard) 6DO (standard) RJ 45 and RS 485 comms (standard) IEC 61850, Modbus, IEC 103 protocols Optionally available: 5xI/O card slots (8DI / 5DO / 2xfiber Ethernet) AQ V211 – Voltage protection IED

22 AQ F215 – Feeder protection IED 4 stages o/c (50/51) 4 stages e/f (50/51N) 4 stages directional o/c (67) 4 stages directional e/f (67N) REF low or high*-impedance (87N) or cable end differential protection 4 Neg. seq. balance stages (46) 4 Harmonic overcurrent stages (50/51h) Cable thermal protection (49) 4 stages overvoltage (59) 4 stages undervoltage (27) 4 stages residual overvoltage (59N) 8 stages over/under frequency (81U/O) Autoreclose (79) CBFP (50BF) 3 Digital inputs (standard) 6 Output relays (standard) RJ 45 and RS 485 comms (standard) IEC 61850, Modbus, IEC 103 protocols Optionally available: 3 xI/O card slots (8DI / 5DO / 2xfiber Ethernet / arc protection) * Requires external resistors (e.g. Metrosil) Feeder management with full measurements

23 4 stages o/c (50/51) 4 stages e/f (50/51N) 4 stages directional e/f (67N) 4 Neg. seq. balance stages (46) 4 Harmonic overcurrent stages (50/51h) Cable end differential protection Motor thermal protection (49M) Locked rotor / start-up supervision (48) Speed switch (14) Frequent starts (66) Undercurrent (37) Mechanical jam (51M) 4 stages overvoltage (59) 4 stages undervoltage (27) 4 stages residual overvoltage (59N) 8 stages over/under frequency (81U/O) CBFP (50BF) 3DI (standard) 6DO (standard) RJ 45 and RS 485 comms (standard) IEC 61850, Modbus, IEC 103 protocols Optionally available: 3xI/O card slots (8DI / 5DO / 2xfiber Ethernet / arc protection) AQ M215 – Motor protection IED Motor management with full measurements

24 5 controllable objects 16 programmable LEDs Non-volatile event records Logic programming 3DI (standard) 6DO (standard) RJ 45 and RS 485 comms (standard) IEC 61850, Modbus, IEC 103 protocols AQ S214 – Alarm and indication IED Alarm annunciation and I/O extension Optionally available: 6xI/O card slots (8DI / 5DO / 2xfiber Ether.)

25 Measurements (I, U, P, Q,S, pf, E+,E-) Fuse failure (60) CT supervision Auto-reclose (79) 5 controllable objects 16 programmable LEDs Non-volatile event records Logic programming 3DI (standard) 6DO (standard) RJ 45 and RS 485 comms (standard) IEC 61850, Modbus, IEC 103 protocols AQ S215 – Bay control IED Optionally available: 3xI/O card slots (8DI / 5DO / 2xfiber Ether.)

26 AQ 200 series CPU card with basic IO. This configuration will be always available for any IED. COM ARJ-45Ethernet based communications COM BRS-485Serial based communications 1DI_1Input group 1 digital input no. 1, Name in relay DI_1 2DI_2Input group 1 digital input no. 2, Name in relay DI_2 3DI_3Input group 1 digital input no. 3, Name in relay DI_3 4DI_comm GNDCommon ground for CPU card digital input group 5Control 1Control binary out contact NO 6Control 1 7Control 2Control binary out contact NO 8Control 2 9Control 3Control binary out contact NO 10Control 3 11Control 4Control binary out contact NO 12Control 4 13Control 5Control binary out contact changeover NO/NC 14Control 5 15Control 5 16SF_IndicationSystem fault binary out contact changeover NO/NC 17SF_Indication 18SF_Indication 19Aux_voltage Auxiliary voltage input. Two possible variations. 24…80 V AC/DC and 80…265 V AC/DC 20Aux_voltage GND IED grounding CPU

27 AQ 200 series CT card

28 AQ 200 series DI8 option card

29 AQ 200 series D05 option card

30 AQ 200 series Versatile IO

31 AQ 200 series Versatile IO AQ-X210-AAAA AQ-X215-AAA (future) AQ-X213-AAA (future) AQ-X213-BAA (future) AQ-X213-BEA (future) AQ-X213-BEC (future)

32 AQ 200 series Products of the platform Example of X215 and X235 hardware

33 AQ 200 series Thank You


Download ppt "AQ 200 series Protection IED platform, product release 1."

Similar presentations


Ads by Google