1. Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: [Suggested changes to TGD]
Date Submitted: [January 2013]
Source: [Huan-Bang Li, Marco Hernandez, Igor Dotlic, Ryu Miura] Company [NICT]
Address [3-4 Hikarino-oka, Yokosuka, Kanagawa, Japan]
Voice:[ ], FAX: [:[ ],
Re: [Information and discussion on UWB]
Abstract: [Suggestion of adding emergency mode and amendament to UWB Regulation for TG15.8 Peer Aware Communications]
Purpose: [This document is to provide a general review of IR-UWB for PAC]
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P

2. Suggested Changes to TGD
Huan-Bang Li
Marco Hernandez
Igor Dotlic
Ryu Miura
National Institute of Information and Communications Technology (NICT), Japan

3. Purpose of This Document
<month year>
doc.: IEEE <doc#>
Purpose of This Document
Suggestion to add ‘Emergency mode’ to TGD.
Regulation amendment to add to TGD.
<author>, <company>

4. Public Emergency In Application Matrix
<month year>
doc.: IEEE <doc#>
Public Emergency In Application Matrix
In PAC Application Matrix document ( ), we defined a category of ‘Public Safety’.
In Public Safety, we defined a ‘Public Emergency’ type of application/service.
The requirements of the Public Emergency are:
fast reaction time,
minimum latency
high priority
multicast
<author>, <company>

5. doc.: IEEE 802.15-<doc#>
<month year>
doc.: IEEE <doc#>
Suggested Adding Text
Emergency Mode
IEEE shall support an emergency mode. The emergency mode shall be given higher priority and smaller latency than other operation modes. The emergency mode should also work with low power consumption. The emergency mode shall be used in public emergency case with multicast.
<author>, <company>

6. UWB Regulation Amendment
<month year>
doc.: IEEE <doc#>
UWB Regulation Amendment
This amendment is prepared to replace Section 8.5 of document
Only UWB high band ( GHz) is included because we don’t consider UWB low band ( GHz) within TG8.
<author>, <company>

7. doc.: IEEE 802.15-<doc#>
<month year>
doc.: IEEE <doc#>
Suggested Text
8.5 UWB high band (from 6.0 to 10.6 GHz)
8.5.1 China
Frequency band and PSD limits
Minimum signal bandwidth
The minimum signal bandwidth is 500MHz.
Frequency (GHz)
Average e.i.r.p. (dBm/MHz)
Peak e.i.r.p. (dBm/50MHz)
-41 --
-70
<author>, <company>

8. Suggested Text (continue)
<month year>
doc.: IEEE <doc#>
Suggested Text (continue)
8.5.2 EU
Frequency band and PSD limits
Minimum signal bandwidth
The minimum signal bandwidth is 50MHz.
Frequency (GHz)
Average e.i.r.p. (dBm/MHz)
Peak e.i.r.p. (dBm/50MHz)
-41.3
--65
-25
(with DAA)
<author>, <company>

9. Suggested Text (continue)
<month year>
doc.: IEEE <doc#>
Suggested Text (continue)
8.5.3 Japan
Frequency band and PSD limits
Minimum signal bandwidth
The minimum signal bandwidth is 450MHz.
Frequency (GHz)
Average e.i.r.p. (dBm/MHz)
Peak e.i.r.p. (dBm/50MHz)
-70 --
-41.3
<author>, <company>

10. Suggested Text (continue)
<month year>
doc.: IEEE <doc#>
Suggested Text (continue)
8.5.4 Korea
Frequency band and PSD limits
Minimum signal bandwidth
The minimum signal bandwidth is 450MHz.
Frequency (GHz)
Average e.i.r.p. (dBm/MHz)
Peak e.i.r.p. (dBm/50MHz)
-70 --
-41.3
<author>, <company>

11. Suggested Text (continue)
<month year>
doc.: IEEE <doc#>
Suggested Text (continue)
8.5.5 USA
Frequency band and PSD limits
Minimum signal bandwidth
The minimum signal bandwidth is 500MHz.
Frequency (GHz)
Average e.i.r.p. (dBm/MHz)
Peak e.i.r.p. (dBm/50MHz)
6-10.6
-41.3
<author>, <company>

12. Conclusion Remarks Suggestion and text candidate for emergency mode.
Suggested candidate for Section 8.5.