Presentation is loading. Please wait.

Presentation is loading. Please wait.

STEEL SMITH was established in the year of 1980 using extract gained by its promoter Lt. Sh. PRITHVI RAJ SHARMA during his dedicated services given to.

Similar presentations


Presentation on theme: "STEEL SMITH was established in the year of 1980 using extract gained by its promoter Lt. Sh. PRITHVI RAJ SHARMA during his dedicated services given to."— Presentation transcript:

1

2 STEEL SMITH was established in the year of 1980 using extract gained by its promoter Lt. Sh. PRITHVI RAJ SHARMA during his dedicated services given to his family business of same nature for 15 years. Sh. PRITHVI RAJ JI did their diploma in mechanical Eng. in 1960 from ARMY College Roorkee. It is an organization with strong roots in an eventful past and with and clear vision of future. The industry is located on national highway NH-24 in the state of (U.P) at and distance of 20 kms from Delhi. And 5Km from NOIDA. The professional Management of company is committed to achieve excellence in all sphere of our activities namely in house R&D, Manufacturing, machining and quality assurance, STEEL SMITH is always keen to understand of the needs of the customers to serve them better. STEEL SMITH becomes the lead manufacturer of forged flanges in the year We already supply to Defense, Railways, Sugarmill, Petroleums, and Automobile Industries. So, What will the future brings? STEEL SMITH sums it up in two words, More Challenges and the company looks forward to welcome next century and to play. In global market with confidence born of hard-won experience, which used continuously to improve and maintain quality of our products. STEEL SMITH Believes in:- Supplying value added quality products to customers at competitive prices with prompt delivery. Having and trained and motivated team. Having an international identity. Achieving Total quality Management. For STEEL SMITH PUNEET SHARMA (CEO) Profile

3 Manufacturing Process Chart

4 Technical Details for Manufacturing Facilities We are fully equipped with: 1.STEAM HAMMER 8 TON CAPACITY 2.STEAM HAMMER 5 TON CAPACITY 3.CLOSE DIE HAMMER (1.5 M.T.) 4.MASSEY HAMMER (1 M.T.) 5.TURNING PRESS (2 M.T.) 6.RING HAMMER (8 M.T.) 7.HEATING FURNANCE (A) 13' X 7 ½' X 6 ½' (OIL FIRED) (B) 13 ½' X 8 ½' X 6 ½'(OIL FIRED) (C) 13 ½' X 7 ½' X 6 ½'(OIL FIRED) (D) 5' X 5' X 4'(OIL FIRED) 8.JIB CRANES (10 M.T) 9.LANCASHIRE BOILER 10.TUBEWELL 4" BORE 11.OVERHEAD CRANES (5 M.T.) 12.MOBILE CRANES (10 M.T.) We are fully equipped with: 1.STEAM HAMMER 8 TON CAPACITY 2.STEAM HAMMER 5 TON CAPACITY 3.CLOSE DIE HAMMER (1.5 M.T.) 4.MASSEY HAMMER (1 M.T.) 5.TURNING PRESS (2 M.T.) 6.RING HAMMER (8 M.T.) 7.HEATING FURNANCE (A) 13' X 7 ½' X 6 ½' (OIL FIRED) (B) 13 ½' X 8 ½' X 6 ½'(OIL FIRED) (C) 13 ½' X 7 ½' X 6 ½'(OIL FIRED) (D) 5' X 5' X 4'(OIL FIRED) 8.JIB CRANES (10 M.T) 9.LANCASHIRE BOILER 10.TUBEWELL 4" BORE 11.OVERHEAD CRANES (5 M.T.) 12.MOBILE CRANES (10 M.T.)

5 Technical Details for Manufacturing Facilities CUTTING FACILITIES 1.BANDSAW 650 MM 2.BANDSAW 1200 MM 3.BANDSAW 14" 4.BANDSAW 16" 5.BANDSAW 12" 6.BANDSAW 6" CUTTING FACILITIES 1.BANDSAW 650 MM 2.BANDSAW 1200 MM 3.BANDSAW 14" 4.BANDSAW 16" 5.BANDSAW 12" 6.BANDSAW 6"

6 Technical Details for Manufacturing Facilities Heat Treatment

7 Technical Details for Manufacturing Facilities Machining Division

8 IMPACT TESTTENSILE TESTING Impact strength of forgings is tested to Testing forgings for the mechanical prop. Ensure their ability to withstand shock to confirm their suitability to withstand Loads. Tests are carried out both at roomloads carried by them ion service. Temperature & sub-zero temperature.Model: 4TN-10 FIE Facilities available for proof stress and Recording of load displacement curve. TESTING CAPABILITIES STEEL SMITH has comprehensive mechanical testing facilities that include impact testing, tensile testing & non-destructive testing. The organization uses the most advanced equipment such as ultrasonic testing and highly sensitive mobile spectrometer, specialized dye penetrate and magnetic particle technique. HEAT TREATMENT: Our in-house Heat Treatment Capabilities enhances the total control over the manufacture of quality forgings. The facility is capable of most of the required operations for our in house production, and has performed various requirement for specific heat treat needs for our customer base and specific industry requirement. Annealing Quench - Tempering Normalizing Isothermal Annealing IMPACT TESTTENSILE TESTING Impact strength of forgings is tested to Testing forgings for the mechanical prop. Ensure their ability to withstand shock to confirm their suitability to withstand Loads. Tests are carried out both at roomloads carried by them ion service. Temperature & sub-zero temperature.Model: 4TN-10 FIE Facilities available for proof stress and Recording of load displacement curve. TESTING CAPABILITIES STEEL SMITH has comprehensive mechanical testing facilities that include impact testing, tensile testing & non-destructive testing. The organization uses the most advanced equipment such as ultrasonic testing and highly sensitive mobile spectrometer, specialized dye penetrate and magnetic particle technique. HEAT TREATMENT: Our in-house Heat Treatment Capabilities enhances the total control over the manufacture of quality forgings. The facility is capable of most of the required operations for our in house production, and has performed various requirement for specific heat treat needs for our customer base and specific industry requirement. Annealing Quench - Tempering Normalizing Isothermal Annealing Technical Details for In House Testing Facility

9

10 Despatch Facilities

11 Product Range

12

13

14

15

16

17 Third Party Approvals

18 Industries we are Serving

19 Quality Approvals

20


Download ppt "STEEL SMITH was established in the year of 1980 using extract gained by its promoter Lt. Sh. PRITHVI RAJ SHARMA during his dedicated services given to."

Similar presentations


Ads by Google