1. 3D machining 2 Contents

2. Import model View of the parts model Folder of imported model items Import geometry model Contents

3. Workpiece setup Workpiece parameters tab Create workpiece by extruding a closed curve Top and bottom levels of the workpiece Workpiece contours closed curve Workpiece contour Workpiece model Contents

4. Create operation Create operation menu Roughing waterline Roughing operations New Roughing waterline operation Contents

5. Part parameters tab Part and Workpiece SprutCAM uses the contents of the Model folder as the Part for machining by default. The default workpiece is a prism box around part the Part. Workpiece can be imported from external source as well. Use part of previous operation Workpiece parameters tab Use result of previous operation as workpiece Contents

6. Operation parameters Parameters of the active operation Active operation Contents

7. Operation parameters Contents

8. Toolpath Calculate toolpath Toolpath Toolpath calculated without errors Contents

9. Machining simulation Continuous simulation Result of simulation Contents

10. Create operation Roughing waterline Roughing operations New Roughing waterline operation Contents

11. Job assignment Job assignment parameters tab Contour created with the built-in 2D Geometry drafting system View of the work area with workpiece A closed contour limiting the machined area to the groove on the part is used as the Job assignment. Contents

12. Machining parameters Contents

13. Toolpath calculation Run toolpath calculation Toolpath Indicates calculation success Contents

14. Machining simulation Continuous simulation Result of previous operation Result of machining simulation Contents

15. Create operation Finishing Complex Finishing operations New Finishing Complex operation consists of two operations – Finishing plane and Finishing waterline operations Contents

16. Machined part and workpiece The part for the Finishing complex operation is the part from previous operations. The workpiece is the machining result of previous operations. Machined part Use part of the previous operation Workpiece parameters Use machining result of the previous operation Contents

17. Finishing plane parameters Contents

18. Finishing waterline parameters Contents

19. Toolpath Calculate Toolpath Calculation is successfull Toolpath of the Finishing plane operation Toolpath of the Finishing complex operation Toolpath of the Finishing waterline operation Contents

20. Continuous simulation Machining result Machining simulation Contents

21. Create new operation Finishing drive (rest) Rest machining operations New Finishing drive (rest) operation Create operation Contents

22. Part and Workpiece The part for the Finishing drive (rest) operation is the part of previous operations. The workpiece is the machining result of previous operations. Machined part Reference to the part model Workpiece Reference to machining result of previous operations Contents

23. Finishing drive (rest) parameters Contents

24. Toolpath calculation Calculate toolpath Calculation is sucessful Rest areas machined by the finishing drive(rest) operation Contents

25. Machining simulation Blue colored areas are machined by the Finishing drive (rest) operation Continuous simulation Contents

26. Machining simulation for each operation Finishing result of machining Contents

27. Tools list compiling Create Tools list Tools list dialog Views configuration Objects visibility panel Document pattern Contents

28. Tools list Technology operations Document header List of tools Machining time Views of model geometry Contents

29. Postprocessors Create NC-program Postprocessor configuration file File of the NC-program NC-program code listing Contents