Presentation is loading. Please wait.

Presentation is loading. Please wait.

September 2009doc.: IEEE wng0

Similar presentations


Presentation on theme: "September 2009doc.: IEEE wng0"— Presentation transcript:

1 September 2009doc.: IEEE 802.15-12-0278-00-wng0
<month year> 11/20/2018<month year> doc.: IEEE doc.: IEEE led September 2013 Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [Study Issues for MIMO based CamCom System] Date Submitted: [September, 2013] Source: [Yeong Min Jang, Ratan Kumar Mondal, and Nam Tuan Le, Jaesang Cha] [Kookmin University, SNUT] Address [Kookmin University, Seoul, Korea] Voice:[ ], FAX: [ ], Re: [] Abstract: [Study Issues for MIMO based CamCom System] Purpose: [Contribution to IEEE IG-LED] Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P Yeong Min Jang, Kookmin University <author>, <company>

2 doc.: IEEE led September 2013 Goals Transmitter and receiver section development for increasing the system capacity and perfect light signal detection Need to enhance the performance by deploying MIMO concept Addressing user service oriented developing challenges and study direction What we need to study for developing CamCom-MIMO system Yeong Min Jang, Kookmin University

3 System Architecture Frame sampling Frame demodulation
doc.: IEEE led September 2013 System Architecture Frame demodulation OOK demodulated data LED Smartphone Frame sampling 30 frames/sec ON OFF OOK modulated data UFSOOK modulated data Visual cell OOK for multi-array LED system Yeong Min Jang, Kookmin University

4 Transmitter Section Modulation schemes-
doc.: IEEE led September 2013 Transmitter Section Modulation schemes- ON-OFF Keying (OOK) FSOOK Providing dimming support in the transmitter Multi-array LED based transmitter design Pre-coding system development for MIMO based CamCom system Yeong Min Jang, Kookmin University

5 Receiving Section Challenges in the receiver section
doc.: IEEE led September 2013 Receiving Section Challenges in the receiver section Color filter– rejecting ‘out-of-band’ illumination color noise and deploying multi-color LED based communication Tracking algorithm Pattern classification– to select the whole pattern of multi-array LED transmitter for any angle (of course inside of the FOV capability) Blur and Gaussian effect– effect of lens blur on the resolvability of the images Selector or combiner– develop a receiver combiner for the direct detection (DD) of the light signal Yeong Min Jang, Kookmin University

6 CamCom MIMO System Use cases of CamCom-MIMO—
doc.: IEEE led September 2013 CamCom MIMO System Use cases of CamCom-MIMO— Spatial Multiplexing for enhancing the capacity Achieve robust reception by using angle-diversity in ComCom system Multiple-Access Techniques— The imaging lens has the additional advantages as this lens naturally provides angle separation between multiple LED light sources Spatial separation characteristic can provide SDMA For more robust operation optical multiplexing (e.g. SDMA) may combine with the electrical multiplexing technique (e.g. TDMA) Study Issues— Co-channel interference reduction Detection technique development for MIMO system– selector or combiner (e.g. MRC) developing for achieve the advantages of MIMO perfectly Pre-coding system development for CamCom-MIMO system Yeong Min Jang, Kookmin University

7 doc.: IEEE led September 2013 Conclusions Need to standardize multi-array LED based transmitter with additional supporting characteristics (e.g. dimming, flickering) The possibilities of developing novel modulation schemes will arise due to the multi-array LED pattern in transmitter Need to develop a selector or combiner technology for detecting the multiple LED’s signal in CamCom-MIMO system Need to fixed easy deployment strategies of the current standard of particular application Yeong Min Jang, Kookmin University


Download ppt "September 2009doc.: IEEE wng0"

Similar presentations


Ads by Google