Presentation is loading. Please wait.

Presentation is loading. Please wait.

Www.iNELS.com PRESENTATION iNELS. CHARACTERISTICS i: iNELS ® is a smart wiring system designed especially for: switching dimming control and measurement.

Similar presentations


Presentation on theme: "Www.iNELS.com PRESENTATION iNELS. CHARACTERISTICS i: iNELS ® is a smart wiring system designed especially for: switching dimming control and measurement."— Presentation transcript:

1 www.iNELS.com PRESENTATION iNELS

2 CHARACTERISTICS i: iNELS ® is a smart wiring system designed especially for: switching dimming control and measurement monitored state of object integration of multimedia installation bus CIB: communication and power supply units actors (receivers) and sensors (transmitters) and data telegrams IDM software-assigned functions and operating parameters www.iNELS.com Presentation iNELS

3 SYSTEM OPTIONS OF iNELS switching and dimming of lighting Detection of indoor and outdoor movement and light intensity. motion control blinds, shutters, awnings, garage, doors, entrance gates etc. management systems, heating and air conditioning control various appliances (with interlocks on selected priorities) integrated electronic security alarm visualization - IDM, iMM Remote Access (GSM and Internet) www.iNELS.com Presentation iNELS

4 THE POSSIBILITY APPLICATION OF iNELS Houses (lighting, heating, air conditioning, ventilation, blinds, etc.) www.iNELS.com Presentation iNELS

5 THE POSSIBILITY APPLICATION OF iNELS Apartment buildings (plus common area management) www.iNELS.com Presentation iNELS

6 THE POSSIBILITY APPLICATION OF iNELS Cottages (plus remote access) www.iNELS.com Presentation iNELS

7 THE POSSIBILITY APPLICATION OF iNELS Hotels and restaurants (the central feature scenes) www.iNELS.com Presentation iNELS

8 INSTALLATION BUS CIB communication protocol is an internal (company) response time of the entry into a central unit to output up to 150 ms free topology: Linear and their combinations Star Tree Linear Star Tree www.iNELS.com Presentation iNELS

9 PARAMETERS INSTALLATION BUS CIB 1A maximum load for each branch of the CIB total length of one branch (line) CIB may be 550 m CU2-01M CU2-01M - 2 separate branches directly to CIB - 4 more branches CIB via external masters on each branch 32 HW addresses, is 32 units iNELS CP-1000 CP-1000- 2 separate branches directly to CIB - 8 more branches CIB via external masters www.iNELS.com Presentation iNELS

10 PARAMETERS INSTALLATION BUS CIB 1 CIB branch: The physical limit 1A Logical limit 32 address Length 550m : Total: Number of iNELS unitsCU2-01M192 CP-1000320 www.iNELS.com Presentation iNELS

11 SYSTEM BUS TCL2 System with linear bus topology Connecting external master module MI2-02M, which allow increasing the number of branches (lines) installation bus CIB Maximum length of TCL2 bus is 300 m J-Y(St)-Y 2x2x0.8 Recommended cable J-Y(St)-Y 2x2x0.8 120 Ω Ends with a resistance with value 120 Ω www.iNELS.com Presentation iNELS

12 SUMMARY - : Accumulation of bus lines with power lead : We recommend to avoid accumulation the power lead. Alternatively, a minimum distance from power lines 30 cm : Conditions for bus line : Recommended cables Electromagnetic interference is avoided Cable at any point is mechanically damaged Cable must not be mechanically stressed (must be respected technology installation procedures, temperature, bend radius, modes of attachment) GENERAL PRINCIPLES FOR THE MANAGEMENT BUS www.iNELS.com Presentation iNELS

13 DESIGN OF SYSTEM ELEMENTS Modul M - Modul M - Installation on DIN rail M DI/ACTI/AI DOAO Box B - Box B - installation into a wiring box B DI/ACTI DOAO Wall drivers E/G DITI DO www.iNELS.com Presentation iNELS

14 Central Unit CU2-01M Ethernet 10/100base 27.2 VDC CIB 1 CIB 2 TCL2 RS232 PSM 4x DI 1x DO Ethernet 10/100 Mbit/s power 27.2V DC, 24V DC 2x interfaces CIB 1x interfaces TCL2 1x serial chanel RS-232 2x PSM 4x DI (IN1 - IN4) 1x DO integrated WEB server SW IDM, SCADA/HMI Reliance, OPC server OPC server www.iNELS.com Presentation iNELS

15 External Master CIB MI2-02M 2 branch of CIB bus more 2 branch of CIB bus more (identifying, addressing and configuration of units), data processing and transfer them to CU2-01M 1x TCL2 Circle switch is used for setting the address of MI2-02M on the TCL2 bus LEDs for identification communication on the CIB bus TCL2 CIB CIB Circleswitch LED diod www.iNELS.com Presentation iNELS

16 GSM Gate - GSM2-01 32 phones numbers 48 outgoing SMS each on a 20-digit 32 incoming SMS each on a 20-digit defined dialing phone numbers and ringing for 20 sec and end You can define actions on incoming calls 27.2 VDC RS232 RMSA www.iNELS.com Presentation iNELS

17 Bus separator for power supply BPS2-02M ensures the correct power of two branches (lines) CIB, separates power supply units from peripheral and communication master terminals for connection 27.2VDC source AKU terminals for connecting back- up battery 2x CIB interfaces AKU 27.2 VDC 2x CIB terminals +27 V and GND for power supply and CU2-01-01 GSM2 www.iNELS.com Presentation iNELS

18 Connections of BPS2-02M A CU2-02M www.iNELS.com Presentation iNELS

19 Connections of BPS2-02M A MI2-02M www.iNELS.com Presentation iNELS

20 Binary input - IM2-20B, IM2-40B, IM2-80B, IM2-140M 2x, 4x, 8x a 14x DI 2x, 4x, 8x a 14x DI balancing option for alarm CIB CIB 12 VDC 2x DI 4x DI 1x TI CIB 12 VDC 8x DI 1x TI contact inputs can be defined as NC / NO output 12V DC / 75 mA (150 mA) for power of alarm units CIB 12 VDC 14x DI www.iNELS.com Presentation iNELS

21 Temperature input - TI2-40B, Analog input ADC2-40M 4x TI - TC/TZ 4x TI - connection resistance temperature sensors TC/TZ CIB 4x TI CIBCIB 3x AI 1x AI 4x AI 4x AI the common terminal GND input - U, I a RTD selectable ranges 14 bit A / D converter resolution 14 bit For powering passive resistive sensor termin al with a reference voltage 5.4V only in version IDM 1.1.3.576 www.iNELS.com Presentation iNELS

22 Dimming actuator - LM2-11B switching and dimming load RLC autodetection of load 1x TI 1x a 2x DI (230V AC) 1x a 2x AO (250 VA) CIB CIB 1x TI 1x DI 1x AO www.iNELS.com Presentation iNELS

23 Dimming actuator - DA2-22M RLC, LED, (ESL) switching and dimming load RLC, LED, (ESL) 1x TI 1x a 2x DI (230V AC) 1x a 2x AO (500 VA) CIBCIB 1x TI 2x DI 2x AO potential at terminal L on DA2-22M is recommended to protect the safety element corresponding to the connected load (fuse characterized. F) Setup load and minimum brightness with potentiometers on the front side. www.iNELS.com Presentation iNELS

24 Dimming actuator - DIM-6 switching and dimming load RLC 1x AO (2000 VA) 1x AI (0-10 V, 1-10 V) 10 000 VA modular expandable up to 10 000 VA CIB 1x AO 1x AI 1x DI 10 kW hw setup of load (jumper) www.iNELS.com Presentation iNELS

25 Dimming actuator - LBC2-02M control dimmable ballasts for fluorescent tube 2x AO (1-10 V) 2x DO (RO) (16 A/4000 VA AC1) CIBCIB 2x AO 1x DO www.iNELS.com Presentation iNELS

26 Switching actuator - SA2-01B, SA2-02B switching appliances and loads 2x DO (RO) - 2x DO (RO) - floating switching contact 16 A/4000 VA AC1 - SA2-01B, 8 A/2000 VA AC1 - SA2-02B Relay contact 16 A/4000 VA AC1 - SA2-01B, 8 A/2000 VA AC1 - SA2-02B CIBCIB 1x TI 1x DO CIBCIB 1x TI 1x DO www.iNELS.com Presentation iNELS

27 Shutters actuator - JA2-02B, JA2-02/DC. motion control shutters, blinds etc. JA2-02B - 2x RO 4 A/1000 VA AC3 4 A/1000 VA AC3 JA2-02B/DC - 2x RO - JA2-02B/DC - 2x RO - drives with supply voltage of 24V DC, direction of rotation is controlled by changing the polarity of the motor CIB 1x TI L DOWN UP CIB U www.iNELS.com Presentation iNELS

28 Switching actuator - SA2-02M, SA2-04M switching appliances and loads 2x DO (RO) - SA2-02M - 16 A/4000 VA AC1 2x DO (RO) - SA2-02M - floating switching contact 16 A/4000 VA AC1 CIBCIB 1x DO CIBCIB 4x DO (RO) - SA2-04M – 16 A/4000 VA AC1 4x DO (RO) - SA2-04M – floating switching contact 16 A/4000 VA AC1 www.iNELS.com Presentation iNELS

29 Switching actuator - SA2-012M switching appliances and loads 12x DO (RO) – switching contact 12x DO (RO) – switching contact 8 A/2000 VA AC1 8 A/2000 VA AC1 each of four identical outputs switching the same potential CIB 4x DO 230 V AC power for unit is 230V AC 4x DO www.iNELS.com Presentation iNELS

30 Analog output - DAC2-04B, DAC2-04M 4x AO - 0-10V, 1-10V control devices that are controlled by this signal (dimmable ballasts of fluorescent lamps, dimmers, thermoelectric valves, servo drives, instrumentation element) CIBCIB 4x AO 1x TI CIBCIB 4x AO www.iNELS.com Presentation iNELS

31 Thermovalve controler - HC2-01B/AC, HC2-01B/DC switching thermoelectric heads 0/1 HC2-01B/AC – 1x DO - 24 - 230V AC 0.15 A/230V AC HC2-01B/AC – 1x DO - 24 - 230V AC Maximum peak current 0.15 A/230V AC HC2-01B/DC – 1x DO - 24V DC 0.5 A/30V DC Maximum peak current 0.5 A/30V DC 1x AO - 0-10V 1x AO - 0-10V CIBCIB 1x TI 1x DO CIB CIB CIB 1x TI 1x TI 1x DO 1x AO 1x AO www.iNELS.com Presentation iNELS

32 Multifunction control unit - SOPHY2, SOPHY2-L sensor of the human voice ambient light intensity sensor 1x TI - 1x TI - integrated temperature sensor LOGUS 90 design in a LOGUS 90 CIB 4x DI IR receiver IR transmitter 6x DI www.iNELS.com Presentation iNELS 1x DI

33 Wall Switch - WSB2-20, WSB2-40, WSB2-80 integrated micro-switches with a low stroke design: CIBCIB WSB2-20 - 2x DI, 2x DO WSB2-40 - 4x DI, 4x DO WSB2-80 - 8x DI, 8x DO 1x TI - 1x TI - integrated temperature sensor design in a LOGUS90 www.iNELS.com Presentation iNELS

34 Termoregulator - IDRT2-01 control temperature and heating circuit design in Logus 90 1x TI 1x AI - +/- 3°C 1x AI - correction in the range +/- 3°C 2x DO 2x DO indicate LED Korekce State Mode www.iNELS.com Presentation iNELS

35 Touch screen - EST2, EST2/RGB 3,5 touch screen It consists of 3 (4) iNELS elements : IM2-140M, IDRT2, KEY2-01, (ADC2-40M) It consists of 3 (4) iNELS elements : IM2-140M, IDRT2, KEY2-01, (ADC2-40M) design in a LOGUS 90 2(3) main screen: With configurable icons, with digital controller for temperature corection, (screen for RGB control) 2(3) main screen: With configurable icons, with digital controller for temperature corection, (screen for RGB control) www.iNELS.com Presentation iNELS

36 EST2 configurable icons ption 4-12 icons Option 4-12 icons 48 different icons in librery 48 different icons in librery Design in a LOGUS 90 Distinguishes between long and short press configuration is setup via binary inputs IM2-140M Distinguishes between long and short press configuration is setup via binary inputs IM2-140M www.iNELS.com Presentation iNELS

37 EST2 termostat a RGB control www.iNELS.com Presentation iNELS

38 EST2 connection for control RGB www.iNELS.com Presentation iNELS

39 THANK YOU FOR YOUR ATTENTION Martin Ševela Product manager www.iNELS.com Presentation iNELS P a l a c k e h o 4 9 3 | 7 6 9 0 1 Ho l e s o v, V s e t u l y | Cz e c h R e p u b l i c t e l. : + 4 2 0 5 7 3 5 1 4 2 2 1 | f a x : + 4 2 0 5 7 3 5 1 4 2 2 7 | e l k o@e l k o e p. c om | www. e l k o e p. c om


Download ppt "Www.iNELS.com PRESENTATION iNELS. CHARACTERISTICS i: iNELS ® is a smart wiring system designed especially for: switching dimming control and measurement."

Similar presentations


Ads by Google