Presentation on theme: "I-CASS – Door Access System THE LEADING INNOVATOR OF SECURITY SYSTEM."— Presentation transcript:
I-CASS – Door Access System THE LEADING INNOVATOR OF SECURITY SYSTEM
Table Of Content 1.Introduction to I-CASS. 2.Comparison with K-series. 3.System Component. 4.System configuration. 5.System Technology. 6.I-Cass Features. 7.Technical Specification. 8.Precaution & Maintenance.
System Introduction(1) Max.32 doors access control system. Categorized into 2/4/8/12/16/24/32 doors version. Combination of existing door access system, time attendance system, and alarm monitoring system. T-series : Multi-door interlocking features K-series: Auxiliary Output relay based on defined transaction. FEP: Supervised alarm input points.
System Introduction(2) Bring in wireless messaging technology. Short message service among very doors. Huge user and transaction storage capacity. High speed processing and respond time. Interactive blue light graphic LCD display Emergency over ride key( Electronic Key). Long reading range for proximity technology. Ready for mifare and wiegand 26/32bits. Integrated with S-series, K-series, T-series, Commando, Centurion and FEP alarm monitoring system design concept.
1.People choose I-CASS for its flexibility usage in security access control and other relevant application such as: 1. Multi-door anti-pass back that handling max.32 doors operation. 2. Multi-door interlocking features that only allow one door to grant access at a time. 3. Guard Tour application that enabling patrol guard perform checking duty. 4. Ethernet and GSM ready for internal and external communication. 5. Alarm break in protection. 6. Fire alarm emergency exist. System Introduction(3)
System Introduction(4) Dual card entry mode and access counter mode for restricted access area. CCTV and building automation integration. 125Khz and 13.56MHz proximity technology interfacing. I-CASS is designed to meet customer application including –Door access control –Guard tour patrol –Time Attendance –Alarm monitoring –Car Parking control –Building automation –Fire alarm panel integration –CCTV integration –SmartCard based solution
How security handled in I-CASS? System wiring design Electronic key design Communication data protection Emergency event or alert Low power and main fail power detection Communication break down protection Watch dog for safe guard
Benefit of using I-CASS To have more card user capacity in the system. To have a high speed and fast processing time for every operation. To have a large door capacity controlled under one controller. To have a alarm monitoring features at every door. To have a guard tour features at every door. To have SMS messaging service among door reader. To have variety choice of operation mode at every door. To have interactive graphic display on every door reader. To have emergency over ride system To have Ethernet ready capability
Comparison with existing controller(1) Feature/Spec. K-seriesI-CASS InterlockingNo5 door per group (100 group) Anti-pass backAvailable among max. 8 doors Available among Max.32 doors Dual card accessNoAvailable (100 match code) Access CounterNoAvailable on every door setting Emergency Key override Tabular key lockElectronic key with 4 digits password. Display unitNormal dot matrix LCD Graphic LCD with blue backlit
Comparison with existing controller(2) Features/Spec. K-seriesI-CASS EthernetNoOn board Ready GSM SMSNoReady Alarm monitoringBased on TTL input on every controller only 2 supervised sensor points on every door Fire alarmNoFire alarm for emergency door release Guard TourNoAvailable on every door ready as checking terminal. Auxiliary OutputAvailable
Comparison with existing controller(3) Feature/Spec. K-seriesI-CASS Speed8Hz24MHz User storage5,000 users20,000 users Transaction storage2,50050,000 users Door connectionMax. 8 doorsMax. 32 doors Processor8 bits MCU16 bits MCU RAM128K Byte2M byte
Comparison with existing controller(4) Feature/Spec. K-seriesI-CASS Short Messaging Service NoAvailable among door readers Door release time zoneNoAvailable on every door setting Lock out modeNoAvailable on every door setting Emergency duress alarm Available General purpose relay output NoAvailable on controller Software32bits SmartGuard series software 32bits SmartGuard I- CASS software
Level of Changes 2Mhz 6Mhz 1024KB 128KB bps 9600bps % more 40% Bus Frequency Onboard RAM UART Size Comm. Speed Door Connection Over all Features Existing System I-CASS System Comparison with Castle-S/K/T&Commando System
System Component(1) I-CASS controller SmartBox (Door Interface Unit) Door Reader Electronic Key Power Supply PC interface (PCI) SmartGuard I-CASS v5.6 Used as real time processing unit for all door event and alarm. As card user databases storage. As log transactions storage. Used for all the user setting. Responsible for all the communication bus polling.
System Component(2) SmartBox-Door Interface Unit Used to control the electronic door lock device, door contact and lock release button. Used as reader interface communication gateway to controller. Perform basic door controlling function during system controller breakdown.
System Component(3) I-CASS Reader Interface Act as reader interface for proximity reader. Mifare® serial number interfacing. Wiegand 26bits interfacing. Keypad and LCD interfacing. Perform card number conversion. Display informative message. PIN generator Alarm arming and disarming interface panel
System Component(4) Electronic Key Connected to reader interface board Used during emergency breakdown to over-ride the door lock. Security key is stored with a standard encryption technique. 10 digits key with suitable password to release door lock.
System Component(5) PC Interface Unit (PCI) Used as a gateway for controller uplink and PC communication port. Used as a signal converter for RS232 to RS485 communication. Act as a software security key for software version determination.
System Component(6) SmartGuard –ICASS v5.6 32bits PC software. Act as a interface software for data or user setting downloading machine. Act as log transaction uploading software for data reporting purpose. Time attendance report generation.
System Configuration(1) RS 485 RS 232 In Reader Out Reader PC Interface Door Interface (2) Door Interface (4) Push Button Door Interface (5) I-Cass Software RS 485 BUS 4 BUS 3 BUS 2 BUS 1 I-CASS Controller PC I RS 232 Maximum 8 doors (expandable) Door Interface (3) E-Key Lock System Magnetic Sensor 2 Wires Door Interface (1)
I-Cass Features Polycarbonate Keypad E - Key LCD ScreenABS CasingProximity TechnologyPress Alarm Alarm Systems Networking SMSGuard Tour Time Attendance
Features Highlighted (1) Enable Short Message Service (SMS) Inbound System Outbound System Storage Capacity: 100 users with 50 characters each user. Doors forced open or burglary Owner SMS Preset greetings or short messages Employees SMS
Features Highlighted (2) Guard Tour Feature Time set : 20 minsTime set : 10 mins MainBackOff Door 1Door 2Door 3 1. Configuration Back Time set : 20 minsTime set : 10 mins MainOff Door 1 Door 3 Door 2 Beep 2. He/She did not proceed to Door 2 3. He/She did not proceed to Door 3 Time set : 20 minsTime set : 10 mins MainBack Off Door 1Door 2 Door 3 Beep
Features Highlighted (3) Controller storage capacity : Standard 20,000 users. Expandable to 100,000 users Event Transaction Storage Capacity: Maximum 30,000 events Multi door Anti-pass back. Multi door Interlocking On board alarm input and output point. Dual Card Mode.
Features Highlighted (4) Access Counter. Time Zone Control Door Release Button 2 Holiday 50 settings per group. Software Configurable to general purpose relay output. Enable to Interface with CIA88 additional alarm input or output point. Maximum 32 doors linkage per controller. Keypad arming on every door. Controller backup. Electronic Key (E-Key) for emergency door release. Support K series feature. On board Ethernet. Graphic LCD.
~ The End ~ ~ Thank you ~ Visit our website: for more information.www.castle.com.my