Presentation is loading. Please wait.

Presentation is loading. Please wait.

Automotive Class Procedures and Safety Rules Designed for the protection of you & others Always Remember to Work Smart.

Similar presentations

Presentation on theme: "Automotive Class Procedures and Safety Rules Designed for the protection of you & others Always Remember to Work Smart."— Presentation transcript:

1 Automotive Class Procedures and Safety Rules Designed for the protection of you & others Always Remember to Work Smart

2 Come to class prepared Pencil Folder Calculator

3 Attendance Be on time for class Do not miss class!!! You are responsible for missed work

4 Dismissal Bell Do not leave class until instructor gives permission

5 No late work will be accepted.

6 Bathroom Use the bathroom before class

7 No Food or Drink

8 No MP3 Players No car stereos No games

9 No Cell Phones

10 Everyone must wear Safety eye protection while observing or taking part in lab activities, before, during & after school. (Z.87 ANSI approved eyewear)

11 Its the Law Safety eye protective goggles (1) (1) Every student and teacher in schools, colleges, universities and other educational institutions participating in or observing any of the following courses is required to wear appropriate industrial quality eye protective goggles at all times while participating in or observing such courses or laboratories:

12 One More Bit of Eye Injury Info 2.5 million eye injuries occur annually in the U.S. 2,500 of those per day from workplace accidents Over 60% of workers injured are not wearing safety eye protection at the time of the injury The average cost of an eye injury is $4,000 The best eye protection you can wear is the kind you will wear! Please keep them on at all times.

13 Ear protection is recommended when decibel levels exceed healthy levels.

14 Skin protection is recommended when working with chemicals & corrosives.

15 Wear appropriate clothing while performing tasks.

16 Proper Footwear Required No sandals

17 Do not wear jewelry on your wrists, fingers, ears, or neck while working on vehicles.

18 Long hair must be tied back to prevent getting caught up in moving machinery.

19 Horseplay, practical jokes, and fooling around will not be tolerated in the shop or the classroom.

20 Shop cleanliness & orderliness is important for a safe and efficient work environment.

21 Keep tools in good condition by using them properly and storing them properly. Please store them cleanly too.

22 Dont attempt to use equipment that you are unfamiliar with. Always get the instructors demonstration before use.

23 Carbon monoxide is an odorless, poison gas present in engine exhaust. CO can kill you! Always use proper ventilation on running vehicles.

24 Only students with a valid drivers license may move vehicles in & out of the lab. Ted Nugent

25 One student per car No passengers allowed to retrieve vehicles

26 No Parking by Auto Shop Do not block Mr. Browns fence Students park in student parking lot

27 When doing heavy or awkward lifting, always get assistance and lift with your knees, not your back.

28 Report all injuries to the teacher immediately.

29 Know First Aid Kit location

30 If injured, do not leave the area, the office must be called for first-aid. (extension 5511) (9911)

31 Use good judgment in all situations

32 No Vandalism Vandalism or theft of school property or theft of another students projects or possessions may result in, but is not limited to: removal from class with an F, expenses for damages or loss, charged with destruction of private/public property, and/or theft, and possible expulsion from school.

33 To prevent fires, place all shop towels (rags) in the proper air-tight containers.

34 Types of Fires Class A= Class B= Class C=

35 Do not cause sparks or fire in the area, especially near gasoline, batteries, or other fuel sources such as solvents or cleaners.

36 Fire Extinguishers Located near exits Dry Chemical Type –A, B, and C fires

37 Emergency Exit Fire Drill –Go out nearest exit and meat across the street Tornado Drill –Stay in auto classroom Intruder Drill –Go into metals shop

38 Know the location of the MSDS binder. Material Safety Data Sheet

39 Work only under the supervision of an instructor. Do not work alone in the shop or the parking lot.

40 Keep automatic transmission vehicles in park & manual transmission vehicles in neutral & block the wheels while jacking or doing any running tests.

41 Enter your vehicle completely before cranking the engine.

42 All vehicles raised with jacks must be supported with safety stands or jack stands. Never trust a jack to hold a vehicle up.



45 Raise jack handles and stand up floor creepers when not in use to prevent tripping over them or slipping on them.

46 Have the Instructor check the hoist or jack location before lifting

47 Instructions for two post lift 1.Guide…. Vehicle onto lift 2.Find…… Proper vehicle lift points 3.Set……. Lift arms in place 4.Lift…….Until arms touch vehicle 5. Lift…….Until wheels are off the ground and shake. 6.Lift…….To working height and set locks

48 Instructions for drive on lift 1.Guide vehicle onto lift –Do not stand in front of car 2.Chock wheels before getting out of vehicle 3.Lift to working height and set locks –Always close car doors!

49 Garage door Never leave garage door half open

50 Always leave window open

51 $ $ $ Before Work begins –All repair orders started –All parts paid for Only two students per job –Nobody will complete work alone

52 The ABC Rule of Shop Safety is Always Be Careful

53 Grading Scale %A78-79%C %B+75-77%D %B72-74%D 85-86%B-70-71%D %C+Below 70%F 80-81%C

54 Final Grade Calculation P1, P2, P3Sem. Exam 80% Total Points Homework- 20% Lab Work- 45% Tests- 35% 20% Participation 10% Example: Sem. Grade Final Exam Final Grade 80% (C)40% (F)72% (D)80% 72.8 ( D)

55 Participation Grade: Participation Grade: Start each semester with 100 points 10 point violations: - Daily participation (unexcused absence) - Safety Violation (safety glasses) - Not prepared for class (office supplies) - Clean up not completed - Cell phone/ Electrical Device violation - Daily Task not completed - Behavior/ Attitude Problem 5 point violations: - 3 Free Tardies. Each additional = 5 point deduction - 5 excused absence. Each additional = 5 point deduction *Participation points can be made up on an individual basis per instructor approval.

Download ppt "Automotive Class Procedures and Safety Rules Designed for the protection of you & others Always Remember to Work Smart."

Similar presentations

Ads by Google