Presentation on theme: "The AUTO-ADD Story How The Unregistered Sensor Became an AUTO-ADD."— Presentation transcript:
The AUTO-ADD Story How The Unregistered Sensor Became an AUTO-ADD
Auto Registration A feature in the Temp Trak application that automatically displays the temperature of unregistered sensors. Including any sensor with a battery that may be in someones drawer or in a cabinet. A radio button in Temp Trak turns the feature on or off. The feature was turned on February 2, 2006 and turned off later that same day.
Auto Registration ON A battery is placed in the sensor, the reset button is pressed and the sensor is installed on the appliance. The signal sent by an unregistered sensor IS automatically picked up by the system.
Birth of an AUTO-ADD The system automatically registers the sensor with the title AUTO-ADD SENTRY XXXXXX. (XXXXXX is the factory set sensor ID) The AUTO-ADD is born! is displayed in Temp Trak is NOT a member of a Group or View displays no specific location
The AUTO-ADD is a PERMANENT ENTRY in the Temp Trak system until deleted or registered. can be renamed, added to a Group and View, etc. when it is properly registered. when registered it is no longer considered an AUTO-ADD.
Auto Registration Off A battery is placed in the sensor, the reset button is pressed and the sensor is installed on the appliance. The signal sent by an unregistered sensor is NOT automatically picked up by the system.
Auto Registration Off (Contd) The system does NOT automatically register the sensor. The sensor is not a member of a Group or View. is not displayed anywhere in Temp Trak. MUST be registered to display the temperature it is sending.
Facts AUTO-ADD sensors exist in the system. need to be updated to reflect their actually location. This may require a physical inventory. Currently, the AUTO-ADD function has been turned off. No sensor will be visible unless it is registered.
Things to Do Contact MCIT, Lori Bruce, 7-8165 WHEN: an AUTO-ADD SENTRY is displayed in your Group or View. a sensor was installed but does not display in your Group or View. Thank You!!