Presentation on theme: "Which is the easy & safest way for water Disinfection Todays Topic."— Presentation transcript:
Which is the easy & safest way for water Disinfection Todays Topic
Ozone There are many ways to disinfect water. It can be done by… Ionization UV Chemicals Etc.
1 Chlorine is the most common chemical disinfectant but the question is: Is disinfection with Chlorine really safe and reliable? Chemical disinfection
1.Use of chlorine is carcinogenic in drinking water (Mutagen X) Harvard Medical/ Barcelona Study Use of chlorine causes TriHaloMethanes (THM) e.g. chloroform, bromodichloromethane, bromoform bromochloromethane. 3. Use of chlorine causes haloacetic acids (HAA) mono-,di and trichloroacetic acids and mono- and bromoacetic acids. 4. Mutagen X cancer potency is 170 times greater than chloroform. MX, THM and HAA are linked to cancer, miscarriages, stillbirths and birth defects This is what you are exposed to:
1. Chlorine does not kill ALL micro-organisms in water 2. Chlorine is pH dependant 3. Chlorine is corrosive 4. Chlorine is hazardous to transport, store and use 5. Chlorine does not effectively remove the bio-film & algae. 6. Chlorine generates by-products that are a proven and permanent risk for human health. Other limitations of chlorine
It has Chlorine in the name but is NOT Chlorine Compare: H 2 0 is 2 parts Hydrogen gas and 1 part Oxygen = Water and NOT Hydrogen nor Oxygen So ClO 2 is VERY different from Chlorine!! 2 Chlorine Dioxide (ClO 2 )
It is a gas that explodes when in contact with air! Difficult and dangerous to deliver to water When delivered to water only 60%-70% pure The remaining 30%-40% are still dangerous and toxic residues However: As such however the BEST disinfectant existing says the WHO Improved purity and stability make it safer and more effective! Facts about traditional Chlorine Dioxide:
To develop an innovative and revolutionary new concept that removes all side effects and by-products known from existing disinfectants. Thus to make a safe and clean disinfectant ! What was the challenge? What was the challenge?
A sublime disinfection power No more dangerous by-products Safe to human and animals Numerous applications A revolution in the world of water disinfection If we could make a pure ClO 2 solution in water what would that mean?
After 8 years of intensive research, scientist were able to generate a pure ClO 2 dissolved in water and called it: Today we present you this revolution
1. A very powerful disinfectant 2. A cleaner of Bio-contamination (Bio-film & Bio-fouling) What is Diamondoxide
1. A 2-component liquid kit delivering: 99.99% pure 0.75% Chlorine Dioxide solution 2. A powerful oxidising agent of the FULL spectrum of micro-organisms 3. A product with the highest quality standards 4. A proven concept 5. An environmental friendly and 100% SAFE disinfectant. 6. Effective in a broad Ph range (4-10) 7. Easy to use without further big investments What is Diamondoxide : The disinfectant
100% effective against all water-borne micro-organisms and spore forming bacteria (Bacteria, Viruses, Protozoa, Fungi, Mould, Parasites, larval eggs, and Sediment) etc. 1 liter disinfects up to 150,000 liters of water Destroys algae-related taste and odour compounds (No taste, No smell) When Diamondoxide is applied the end products are a fraction of sodium sulphate (Na 2 SO 4 ) and sodium chloride (NaCl). These substances are common in water; What Diamondoxide does
Does not chlorinate organic materials; no chlorates, chlorites, chloramines. NO FREE CHLORINES!!! Does not form THMs, HAAs and other organic compounds related to carcinogens (cancer) No build-up of resistance in target micro-organisms No residues formed No corrosion; i.e. of water distribution system, pipes, pumps, filters, domestic/commercial air conditioners, taps, showers, industrial equipment/factories What Diamondoxide does NOT
Classical MethodDiamondoxide method Form:Cl 2 : gas NaOCl: liquid Component A: Component B: Stability of IngredientsVery limited2 years Composition of ClO 2 solution Containing Free Chlorine Containing Chlorate Containing Chloride Containing Chlorite Explosive No Free Chlorine No Chlorate No Chloride No Chlorite Non-explosive Kinetic Half Time >30 days! (in solution form when storage conditions are respected) Comparison Facts
Kinetic Half Time >30 days!
100% Safe to Disinfection water by 100% Disinfection
Bio-film is the film of dirt, residues and micro-organisms in pipes, filters, pumps etc.. What is Bio-film / Bio-fouling What is Bio-film / Bio-fouling
1. Chlorine does NOT remove both layers 2. Chlorine cannot penetrate Bio-film and kill bacteria living in and behind this Bio-film. 3. Chlorine can only corrode the top layer. 4. Chlorine dioxide and Ionization penetrate the Bio-film. 5. Only complete removal of the Bio-film guarantees 100% save water at the tap 6. Chlorine dioxide removes the Bio-film and prevents the growth by a low continuous dosing. Facts about Bio-film
Human Use: Drinking water Municipal water Ice cube Industry Bio Industry: Poultry Hatchery Poultry Growers Egg Production Dairy Swine farms Swine Processing Meat and milk farms Meat Processing Fish and shrimp hatchery Fish & shrimp Farming Industry Fish and Shrimp Processing Fruit and Vegetable Processing Canning Industry Brewing and Milk Industry Frozen Foods Cosmetics Industry Applications of Diamondoxide
Industrial Market: Cooling Towers Pulp & Paper Refineries, Pipelines Irrigation Water Well Water Waste Water Water Parks & Resorts Merchant Marine, Navy Cruise Ships Commercial Aircraft Car Wash, Train & Truck Wash Injection Water Urban & leisure market Hotels and resorts Hospitals Condominiums Commercial Building Air Conditioning systems Swimming Pools and Hot Tubs Domestic Sanitize Horticulture Flowers Irrigation Ornamental Fish Aquaria
Safe, reliable and simple water Disinfection How to use it
Simple Application Simple instructions Water volume Component A first Component B second Wait for 1-5 hours (depending on temperature) Diamondoxide ready for application
Dosage rates according to your requirement Simple (standard) dosing equipment and a PE-HD tank; Residual is measured by DPD Colorimetric Method (DPD 1); Residual is measured by ORP equipment; Residual is measured by Chlorine Dioxide Sensor Thick PE-HD storage tank (black colored). Dose/Measure
The dosing capacity of 1 Liter Diamondoxide is calculated as following: Diamondoxide 0.75% = 7,5 gram ClO 2 per liter = 7500 ppm/mg per liter 1 liter of Diamondoxide can disinfect: at 0.05 ppm dosing= 7500 ppm/0.02 ppm = liter of water. at 0.10 ppm dosing= 7500 ppm/0.10 ppm = liter of water. or Volume of water to be disinfected x dosage rate = ClO ppm Yield per litter
Long shelf life (2 years guaranteed) Long stability (kinetic half time of the solution >30 days) 10 x more powerful than Chlorine No environmental or health issues No harmful by-products and end-products Not corrosive when dosed into the water. Low equipment investment Easy to dose, easy to control Kills 100% of water-borne pathogens Eliminates bio-film and prevents re-growth of bio-film. Safe to use, store and transport (by truck, plane, boat and train) On-site production Summary of advantages of Diamondoxide
Thank you for your attention and participation of this presentation.