Presentation is loading. Please wait.

Presentation is loading. Please wait.

1.5g1.0g4.0g3.5g3.0g2.5g2.0g Welcome! This page will serve as your home for navigating through this experiment. Some of the buttons will remain inactivated.

Similar presentations


Presentation on theme: "1.5g1.0g4.0g3.5g3.0g2.5g2.0g Welcome! This page will serve as your home for navigating through this experiment. Some of the buttons will remain inactivated."— Presentation transcript:

1 1.5g1.0g4.0g3.5g3.0g2.5g2.0g Welcome! This page will serve as your home for navigating through this experiment. Some of the buttons will remain inactivated until you have completed the comprehension quiz, but afterwards you will be able to navigate to any part of the lab. Feel free to skip around at any point in time to better understand part or parts of the experiment, Click on the blue buttons found throughout the lab to navigate through. If you dont understand something, go back and do it again. Materials Step 1Step 2 Chemical Change: Heat and Quantities of Reaction Chem 1100 Hamline University Introduction Continued Introduction Data Table Safety Information Quiz Start Lab

2 1.5g1.0g4.0g3.5g3.0g2.5g2.0g Welcome! This page will serve as your home for navigating through this experiment. Some of the buttons will remain inactivated until you have completed the comprehension quiz, but afterwards you will be able to navigate to any part of the lab. Feel free to skip around to better understand part or parts of the experiment, Click on the blue buttons found throughout the lab to navigate through. If you dont understand something, go back and do it again. Materials Step 1Step 2 Chemical Change: Heat and Quantities of Reaction Chem 3050 Hamline University Introduction Continued Introduction Data Table Safety Information Quiz

3 Introduction Scientists often want to measure how far a reaction has progressed. This can be done by measuring either how much of the reactants have been consumed, how much product was produced, or measuring some other variable that is directly related to one of these quantities. Most chemical reactions are accompanied by a heat change. The reactions are said to be exothermic if they evolve heat and endothermic if they take it from the surroundings. The heat of the reaction can easily be related to the extent which the reaction has progressed to determine the amount of chemical change. In this experiment we will be measuring the amount of heat given off when a fixed amount of copper ions in solution react with varying amounts of zinc metal. The net ionic equation is as follows: Zn (s) + Cu 2+ (aq) Zn 2+ (aq) + Cu (s) As you can see in the balanced equation above, this reaction occurs with a one to one mole ratio of zinc metal to copper ions. The extent to which this reaction progresses is going to be limited by one of the two reactants. If all of the Zinc is used up first it is the limiting reagent, but if all of the copper is used up first it is the limiting reagent. RETURN TO SELECTION PAGE Next Slide Previous Slide

4 Introduction Continued RETURN TO SELECTION PAGE As previously discussed, in this experiment you will be reacting a fixed concentration of copper ions with seven different weights of pure zinc metal. This is an exothermic reaction meaning that it gives off heat. The amount of heat that is given off in each reaction is proportional to the amount of reacting that has occurred. The heat that is being produced in this reaction arises from the forming and breaking of chemical bonds. The heat associated with a chemical change that occurs at a constant pressure (atmospheric in this case) is called the enthalpy change of a reaction and is symbolized by ΔH This program represents a simulation of many actual trials that have been carried out in the laboratory. You will be given the final and initial temperature of the reaction at the end of each trial and will use that data as well as the color changes that you observe in the calorimeter to complete the second portion of this lab which will be done in excel. Have fun and dont be afraid to repeat certain portions of the lab in order to better understand them; that is the beauty of a computer based laboratory experiment! Next Slide Previous Slide

5 Whats happening on a molecular level? Zn (s) + Cu 2+ (aq) Zn 2+ (aq) + Cu (s) To help the concept of limiting reagents, we are going to look at what is happening on a molecular level. The reaction that is being carried out is between pure zinc metal and copper sulfate pentahydrate solution. We are going to concentrate on the net ionic equation (shown below) and ignore all other substances present in this reaction. To see the complete reaction click here. Essentially what is happening in this reaction is that zinc metal is becoming a zinc ion and copper ion is becoming copper metal. This change requires a transfer of electrons, but we are not going to dwell on that at this level.here Zn Cu 2+ Zn 2+ Cu (s) Previous Slide Next Slide RETURN TO SELECTION PAGE

6 Zn Cu 2+ Zn 2+ Cu (s) Zn Cu 2+ Zn 2+ Cu (s) Zn Now, lets suppose there are three atoms of zinc metal and two copper ions. Two of the zinc atoms will be able to react with a copper ion to produce the desired reactants, but one will not be able to find a copper ion and will therefore remain zinc metal. In this example, copper ions are the limiting reagent. Once all of the copper ions are consumed, the reaction can no longer proceed and no new product will be produced. Previous Slide Next Slide RETURN TO SELECTION PAGE

7 As you just saw, this reaction involves a change in the chemical nature of the reactants to produce the products. Along with a change in the nature of these substances comes a change in the energy of these substances. This reaction is exothermic, and in an exothermic reaction the products have less energy than the reactants. As you can see in the diagram below, that change in energy can be accounted for by the release of heat. Even though the energy of the products is lower than the energy of the reactants, the final temperature of the solution is higher than the initial temperature of the solution. This is because energy is lost from the reacting system in the form of heat. Therefore, if we measure the amount of heat that is given out we are also measuring the change in energy and therefore the extent to which a reaction has progressed. Previous Slide RETURN TO SELECTION PAGE Next Slide

8 Whats happening on a molecular level? To help explain how the limiting reagent actually stops the reaction when it is used up we are going to look at what is happening on a molecular level. The reaction that is being carried out is between pure zinc metal and copper sulfate pentahydrate solution. Look at the molecular depiction of these two substances below. One copper ion is attached to a sulfate (SO 4 ) molecule which is surrounded by 5 water molecules. Zn S H 2 O Cu 2+ Click to see what happens when Zn is added to the beaker Zn + CuSO 4 ·5H 2 O ZnSO 4 + Cu+ 5H 2 0 Previous Slide Next Slide

9 Lets pretend that we are able to add just two atoms of zinc metal to our copper sulfate solution. It is not actually possible to do this because ions are extremely small, but for the sake of simplicity we are going to pretend we can. Those two ions can react via the equation below to form ZnSO4 and 2 Cu ions. However, we have three copper sulfate ions in this beaker, so one of them does not have a zinc ion to react with and the reaction cannot proceed any farther. Zinc is the limiting reagent in this example because it limits how far the reaction can progress. Even if you had 5 Copper sulfate molecules, the reaction cannot proceed any further without more zinc. Zn S H 2 O Cu 2+ Zn + CuSO 4 ·5H 2 O ZnSO 4 + Cu+ 5H 2 0 Next Slide RETURN TO SELECTION PAGE Previous Slide

10 As you just saw, this reaction involves the breaking of a bond between the sulfate molecule and the copper ion and the formation of a bond between that same sulfate molecule and a zinc ion. As these bonds are broken and created, heat is released because this reaction is exothermic. The energy diagram below shows a graph of the energy as the reaction progresses and shows that the difference in energy between the products and the reactants can be accounted for as energy lost in the form of heat. Measuring the heat that is given off gives us information about how far a reaction has progressed or how many bonds have been broken and formed. Next Slide Previous Slide RETURN TO SELECTION PAGE

11 Safety Information RETURN TO SELECTION PAGE Obviously, when carrying out a lab on the computer there is no real risk to you or others around you. However when you are in the laboratory it is important to have a good understanding of the chemicals that you are working with and whether or not they are harmful by themselves or when reacted with other chemicals. One of the best sources of information about the safety and reactivity of chemicals is the material safety and data sheets (msdss) for each chemical. Laboratories are required to have these sheets on file for all of the chemicals in stock and the lab manager would be happy to provide them to you upon request. They can also be found online, and links to the msdss for the chemicals used in this experiment can be found below. Also, remember to wear googles at all times in the laboratory. Zinc Metal: http://sciencelab.com/xMSDS-Zinc_Metal-9925476http://sciencelab.com/xMSDS-Zinc_Metal-9925476 Copper Sulfate Pentahydrate: http://www.sciencelab.com/xMSDS- Copper_sulfate_pentahydrate-9923597http://www.sciencelab.com/xMSDS- Copper_sulfate_pentahydrate-9923597 Next Slide Previous Slide Note: you will have to exit and re-enter the laboratory demonstration in order to view these links. If you click on them they will open in an internet browser behind the demonstration so you can view them later.

12 Comprehension Quiz 1.) The reaction between aqueous copper ions and zinc metal is an______ reaction. a.) exothermic b.) endothermic c.) extremothermic d.) temperate Click on the answers below to test your knowledge. You will not be able to navigate anywhere else in the lab until you have answered all questions correctly.

13 Comprehension Quiz 2.) The enthalpy change of a reaction is the heat associated with the chemical reaction which occurs at constant _________. a.) fluidity b.) molar concentration c.) pressure d.) temperature Click on the answers below to test your knowledge. You will not be able to navigate anywhere else in the lab until you have answered all questions correctly.

14 Comprehension Quiz 3.) The limiting reagent is the one that is completely consumed in the reaction. a.) true b.) false Click on the answers below to test your knowledge. You will not be able to navigate anywhere else in the lab until you have answered all questions correctly.

15 7 styrofoam cups to use as calorimeters and one to use as insulation Copper Sulfate Pentahydrate (CuSO 4 ·5H 2 0) Graduated Cylinder Vernier LabQuest with Temperature Probe Materials Zinc Metal RETURN TO SELECTION PAGE Next Slide Previous Slide

16 Trial1234567 Mass of Zinc1.01.52.02.53.03.54.0 Initial Temp Final Temp Δ T Solution Color Before we begin the lab, copy the following data table into your notebook. You will be completing the empty rows of the table as you proceed through the lab. RETURN TO SELECTION PAGE Next Slide Previous Slide

17 Step 1: Click Add Zinc button below to weigh out 1.0g of Zinc. The rest of the masses will be weighed out for you. Quantities of zinc used:1.0g, 1.5g, 2.0g, 2.5g, 3.0g, 3.5g, 4.0g 0.0000 g Zinc Metal RETURN TO SELECTION PAGE Previous Slide Add Zinc Remove Zinc

18 Step 1: Click Add Zinc button below to weigh out 1.0g of Zinc. The rest of the masses will be weighed out for you. Quantities of zinc used:1.0g, 1.5g, 2.0g, 2.5g, 3.0g, 3.5g, 4.0g 0.0000 g 0.2810 g Zinc Metal RETURN TO SELECTION PAGE Previous Slide Add Zinc Remove Zinc

19 Step 1: Click Add Zinc button below to weigh out 1.0g of Zinc. The rest of the masses will be weighed out for you. Quantities of zinc used:1.0g, 1.5g, 2.0g, 2.5g, 3.0g, 3.5g, 4.0g 0.2810 g 0.5631 g Zinc Metal RETURN TO SELECTION PAGE Previous Slide Add Zinc Remove Zinc

20 Step 1: Click Add Zinc button below to weigh out 1.0g of Zinc. The rest of the masses will be weighed out for you. Quantities of zinc used:1.0g, 1.5g, 2.0g, 2.5g, 3.0g, 3.5g, 4.0g 0.5631 g 0.7501 g Zinc Metal RETURN TO SELECTION PAGE Previous Slide Add Zinc Remove Zinc

21 Step 1: Click Add Zinc button below to weigh out 1.0g of Zinc. The rest of the masses will be weighed out for you. Quantities of zinc used:1.0g, 1.5g, 2.0g, 2.5g, 3.0g, 3.5g, 4.0g 0.7501 g 1.235 g Zinc Metal RETURN TO SELECTION PAGE Previous Slide Add Zinc Remove Zinc

22 Step 1: Click Add Zinc button below to weigh out 1.0g of Zinc. The rest of the masses will be weighed out for you. Quantities of zinc used:1.0g, 1.5g, 2.0g, 2.5g, 3.0g, 3.5g, 4.0g 1.235 g Zinc Metal RETURN TO SELECTION PAGE Previous Slide Add Zinc Remove Zinc 1.536 g

23 Step 1: Click Add Zinc button below to weigh out 1.0g of Zinc. The rest of the masses will be weighed out for you. Quantities of zinc used:1.0g, 1.5g, 2.0g, 2.5g, 3.0g, 3.5g, 4.0g 1.235 g 1.012 g Zinc Metal RETURN TO SELECTION PAGE Previous Slide Next Slide

24 1.0g 4.0g3.5g3.0g2.5g2.0g1.5g copper sulfate pentahydrate (CuSO 4 ·5H 2 0) Step 3: Click the Pour button below to add 50 mL of copper sulfate pentahydrate to each of the seven calorimeters using a graduated cylinder RETURN TO SELECTION PAGE Next Slide Previous Slide Pour

25 1.0g4.0g3.5g3.0g2.5g2.0g1.5g copper sulfate pentahydrate (CuSO 4 ·5H 2 0) Click next slide to continue with lab RETURN TO SELECTION PAGE Next Slide Previous Slide

26 Click Add Zinc button below to add 1.0 g sample of zinc to calorimeter RETURN TO SELECTION PAGE Add Zinc

27 Collecting Data… Temp Initial: 22.0 º C Temp Final: 35.6 º C It is important to stir with the temperature probe while the reaction progresses. Watch for color changes inside of the calorimeter and record the final and initial temperature of each trial. Click next slide once you have gathered your data. RETURN TO SELECTION PAGE Next Slide Previous Slide

28 Click Add Zinc button below to add 1.5 g sample of zinc to calorimeter RETURN TO SELECTION PAGE Add Zinc

29 Collecting Data… Temp Initial: 22.0 º C Temp Final: 43.6 º C Remember to observe color changes and to record the final and initial temperatures. Click next slide once you have recorded your data. RETURN TO SELECTION PAGE Next Slide Previous Slide

30 Click Add Zinc button below to add 2.0 g sample of zinc to calorimeter RETURN TO SELECTION PAGE Add Zinc

31 Collecting Data… Temp Initial: 22.0 º C Temp Final: 49.4º C RETURN TO SELECTION PAGE Next Slide Previous Slide Remember to observe color changes and to record the final and initial temperatures. Click next slide once you have recorded your data.

32 Click Add Zinc button below to add 2.5 g sample of zinc to calorimeter RETURN TO SELECTION PAGE Add Zinc

33 Collecting Data… Temp Initial: 22.0 º C Temp Final: 56.0º C RETURN TO SELECTION PAGE Next Slide Previous Slide Remember to observe color changes and to record the final and initial temperatures. Click next slide once you have recorded your data.

34 Click Add Zinc button below to add 3.0 g sample of zinc to calorimeter RETURN TO SELECTION PAGE Add Zinc

35 Collecting Data… Temp Initial: 22.0 º C Temp Final: 57.5º C RETURN TO SELECTION PAGE Next Slide Previous Slide Remember to observe color changes and to record the final and initial temperatures. Click next slide once you have recorded your data.

36 Click Add Zinc button below to add 3.5 g sample of zinc to calorimeter RETURN TO SELECTION PAGE Add Zinc

37 Collecting Data… Temp Initial: 22.0 º C Temp Final: 58.0º C RETURN TO SELECTION PAGE Next Slide Previous Slide Remember to observe color changes and to record the final and initial temperatures. Click next slide once you have recorded your data.

38 Click Add Zinc button below to add 4.0 g sample of zinc to calorimeter RETURN TO SELECTION PAGE Add Zinc

39 Collecting Data… Temp Initial: 22.0 º C Temp Final: 58.0º C RETURN TO SELECTION PAGE Next Slide Previous Slide Remember to observe color changes and to record the final and initial temperatures. Click next slide once you have recorded your data.

40 Calculate the change in temperature (ΔT) by subtracting the initial temperature from the final temperature in each trial and record this number and the final color of each solution in your data table. Trial1234567 Mass of Zinc1.01.52.02.53.03.54.0 Δ T Solution Color RETURN TO SELECTION PAGE Trial 1Trial 2Trial 3Trial 4Trial 5Trial 6Trial 7 This is the end of the lab. Hit the escape key to exit the demonstration and follow the instructions on the lab handout to complete the rest of the lab in excel.

41 Congratulations! That is the correct answer! Next Question

42 Congratulations! That is the correct answer! Next Question

43 Congratulations! That is the correct answer! Continue Lab

44 Incorrect Please try again Return to Question

45 Incorrect Please try again Return to Question

46 Incorrect Please try again Return to Question


Download ppt "1.5g1.0g4.0g3.5g3.0g2.5g2.0g Welcome! This page will serve as your home for navigating through this experiment. Some of the buttons will remain inactivated."

Similar presentations


Ads by Google