Presentation on theme: "Brother Printer Support Ireland What are the Steps to Clear the Message "Print Unable ZC"?"— Presentation transcript:
Brother Printer Support Ireland +353-768887727 What are the Steps to Clear the Message "Print Unable ZC"?
To fix “Print Unable ZC” issue follow these given steps or you can also take help from Brother Printer support team. 1.“Print Unable ZC” that refers your machine has noticed an uneven supply. This error is a result of a problem takes place on your device, but it is seen that error take place due to operating environment. Actually, this error takes place because your print machine is connected to a different power source like a generator, uninterruptible power supply, or your inverter. 2.It might be possible you are using one of these as a power source like a generator, uninterruptible power supply, or your inverter.
- if you don’t make use any of these sources then go to step 3. -ifyou make use of any of the sources, then go to step 4. - if your machine cord is connected to some other device then you need to choose step 4. - if your machine cord is connected to a standard wall power source then move on to step 6. 3. Check if your device is connected to anAC cord that is connected to a surge protector, power strip or any other device.
4.Next, you have to turn off your machine by pressing and holding ON/OFF button on its machine’s panel. 5.Once your devicegets turned off completely, take out its cord from the power source and then you have to plug in apower cord to standard AC wall source. Next, you have to go to step 7. 6.Turn off your device by pressing and holding ON/OFF button to a machine panel, keep yourdevice off for about 10 seconds then go to step 7. 7.Now turn on your device by pressing ON/OFF button on your machine.
- if this error doesn’t appear on your LCD, then move on to its next step 8. 8.Next, you need to print the printer settings report. A.Click on settings from the bottom right of the display and next press “All Settings”. B.Press its “Down Arrow” continuously until you find print reports then click in “Print Reports”. C.Now you have to click on “Down Arrow” continually until you are able to see printer settings and then click printer settings. D.Next, you have to press “OK” to start printing, this way device will print the printer settings report.
- If you don’t find any error display on the LCD that means this issue is fixed now. For more information, you can contact Brother Printer support +353-768887727.contact Brother Printer support Source