1. CAD/CAM/AM applications in the manufacture of dental appliances
Noor Al Mortadi, Dominic Eggbeer, Jeffrey Lewis, Robert J. Williams 
American Journal of Orthodontics and Dentofacial Orthopedics 
Volume 142, Issue 5, Pages (November 2012)
DOI: /j.ajodo
Copyright © 2012 American Association of Orthodontists Terms and Conditions

2. Fig 1
Hand-held scanner.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

3. Fig 2 Point cloud after triangulation.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

4. Fig 3 Three-dimensional image.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

5. Fig 4 Phantom (haptic) arm, and appliance being built in FreeForm.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

6. Fig 5
Andresen monoblock in the FreeForm virtual environment, indicating where the upper and lower plates were joined.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

7. Fig 6 Intermaxillary edge.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

8. Fig 7 Virtual labial view of tubes built to accept wire.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

9. Fig 8
Guiding jigs for the formation of wire tagging before the physical build.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

10. Fig 9
Arrows indicate where the wire tagging will be bent vertically into the jig.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

11. Fig 10 Labial bow fitted on the guiding jigs.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

12. Fig 11 The final prototype before cleaning.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

13. Fig 12 Final Andresen in CAD.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

14. Fig 13 Andresen prototype fitted to casts.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

15. Fig 14 Virtual build of sleep-apnea device.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

16. Fig 15 A hinge showing stops (A) and rotating section (B).
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions

17. Fig 16 The sleep-apnea prototype fitted to casts.
American Journal of Orthodontics and Dentofacial Orthopedics  , DOI: ( /j.ajodo )
Copyright © 2012 American Association of Orthodontists Terms and Conditions