1. November 2014 Bishkek, Kyrgyzstan
PASTURE REFORM IN KYRGYZSTAN
Animated mountain picture grows into view and shrinks
Select the text box, and then drag the it to the right of the first picture, above the top horizontal drawing guide (2.17).
(Advanced)
Select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate.
Click in the second text box, and then type text for the second picture caption.
Tip: This slide includes three small pictures and one large version of the top small picture. The small pictures are 1.88” high and 2.5” wide. The large picture is 7.5” high and 10” wide (the dimensions of the slide). Before following the procedures below, size each of the three pictures you will insert into the slide to 7.5” high by 10” wide. You will also need to use drawing guides to position your pictures on the slide.
Select the second text box, and then drag the it to the right of the second picture, above the center horizontal drawing guide (0.00).
Select the second text box. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.
Click in the third text box, and then type for the third picture caption.
Select the third text box, and then drag the it to the right of the third picture, above the bottom horizontal drawing guide (2.17).
To display and set the drawing guides, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Right-click the slide background area, and then click Grid and Guides. In the Grid and Guides dialog box, under Guide settings, select Display drawing guides on screen. (Note: One horizontal and one vertical guide will display on the slide at 0.00, the default position. As you drag the guides, the cursor will display the new position.)
To reproduce the animation effects on this slide, do the following:
On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select the 7.5” x 10” version of the picture that fills the top small rectangle on the slide, and then click Insert.
On the slide, do the following:
Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.17 position.
On the slide, select the picture. On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Exit Effects. In the Add Exit Effect dialog box, under Basic, click Disappear, and then click OK.
Press and hold CTRL, select the horizontal guide, and then drag it down to the 2.17 position.
Press and hold CTRL, select the vertical guide, and then drag it right to the 3.50 position.
On the Animations tab, in the Timing group, in the Start list, select After Previous.
Press and hold CTRL, select the vertical guide, and then drag it left to the 2.50 position.
On the slide, select the picture. On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Emphasis Effects. In the Add Emphasis Effect dialog box, under Basic, click Grow/Shrink, and then click OK.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Snip Diagonal Corner Rectangle (fifth option from the left).
On the Animations tab, in the Animation group, click Effect Options, and then, under Amount, click Tiny.
On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then click No Outline.
On the Animations tab, in the Timing group, in the Duration box, enter 0.01.
On the Home tab, in the Drawing group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:
On the slide, select the picture. On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Entrance Effects. In the Add Exit Effect dialog box, under Basic, click Appear, and then click OK.
On the Animations tab, in the Timing group, in the Start list, select On click.
In the Type list, select Linear.
On the slide, select the large picture. On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Emphasis Effects. In the Add Exit Effect dialog box, under Basic, click Grow/Shrink, and then click OK.
Click the button next to Direction, and then click Linear Right (first row, fourth option from the left).
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
Also under Gradient stops, customize the gradient stops as follows:
On the Animations tab, in the Timing group, in the Duration box, enter 2.
Select the first stop from the left in the slider, and then do the following:
On the Animations tab, in the Animation group, click Effect Options, and then click Huge.
In the Position box, enter 0%.
On the slide, select the large picture. On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines and Curves, click Up, and then click OK.
Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
In the Transparency box, enter 51%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
On the slide, select the up motion path. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow. Drag the endpoint to the intersection of the top horizontal drawing guide (2.17) and the left vertical drawing guide (2.50), at the center of the first small picture.
In the Transparency box, enter 85%.
Under Drawing Tools, on the Format tab, in the Size group, do the following:
Right-click the up motion path, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Locked.
In the Shape Height box, enter 1.5”.
In the Shape Width box, enter 8.42”.
On the slide, select the large picture. On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Emphasis Effects. In the Add Emphasis Effect dialog box, under Basic, click Grow/Shrink, and then click OK.
Select the rectangle. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Repeat this process one more time for a total of three rectangles.
On the Animations tab, in the Timing group, in the Start list, select On Click.
Drag the first rectangle and center it vertically on the top horizontal drawing guide (2.17).
Drag the second rectangle and center it vertically on the middle horizontal drawing guide (0.00).
On the Animations tab, in the Animation group, click Effect Options, and then click Tiny.
Drag the third rectangle and center it vertically on the bottom horizontal drawing guide (2.17).
Press and hold CTRL, and then select all three rectangles. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align to Slide.
Click Align Center.
To reproduce the picture effects on this slide, do the following:
On the Insert tab, in the Images group, click Picture. In the Insert Picture dialog box, select a picture and then click Insert.
On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, on the Size tab, under Scale, clear the Lock aspect ratio box, and then under Size and rotate, do the following:
On the slide, select the large picture. On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Exit Effects. In the Add Exit Effect dialog box, under Basic, click Disappear, and then click OK.
In the Height box, enter 1.88”.
In the Width box, enter 2.5”.
On the View tab, in the Show group, clear the Guides checkbox.
Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Border, and then do the following:
To reproduce the background effects on this slide, do the following:
Under Theme Colors click Dark Blue, Text 2, Darker 25% (fifth row, fourth option from the left).
On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Point to Weight, and then click 1 ½ pt.
On the slide, drag the picture until it is centered at the intersection of the top horizontal drawing guide (2.17) and the left vertical drawing guide (2.50).
Select the picture. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate.
In the Direction list, click Linear Up (second row, second option from the left).
Right-click the second picture, and then select Change Picture. In the Insert Picture dialog box, select a picture and then click Insert.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
On the slide, drag the second picture until it is centered at the intersection of the center horizontal drawing guide (0.00) and the left vertical drawing guide (2.50).
Select the second picture. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.
Right-click the third picture, and then select Change Picture. In the Insert Picture dialog box, select a picture and then click Insert.
Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Darker 50% (sixth row, fourth option from the left).
On the slide, drag the third picture until it is centered at the intersection of the bottom horizontal drawing guide (2.17) and the left vertical drawing guide (2.50).
In the Transparency box, enter 0%.
In the Position box, enter 50%.
To reproduce the text effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left).
On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box.
Type the text you want to appear in the text box, and then select the text. Format the text in the textbox using the following steps:
Select the third stop from the left in the slider, and then do the following:
On the Home tab, in the Font group, choose the Calibri font and a font size of 18.
Click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Darker 25% (fifth row, fourth option from the left).
In the Paragraph group, click Align Text Left.

2. The Constitution of the Kyrgyz Republic
The land, its subsoil, air, waters, forests are the exclusive property of the Kyrgyz Republic used in order to maintain a single ecological system as the basis of life and activities of the people of Kyrgyzstan and are under special state protection.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.
Land may also be private, municipal and other forms of property, with the exception of pasture that cannot be privately owned (Article 12).

3. Kyrgyz pastures
More than 93% of the territory of Kyrgyzstan are mountain ranges of the two great mountain systems - Tien Shan and Pamir-Alai, covered by natural pastures with the total area of 9 mln 147 ths ha. Pastures occupy more than 85% of the total area of agricultural land.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

4. Location of Kyrgyz pastures by seasonal use
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.
Summer pastures
Winter pastures
Spring and autumn pastures
Arable land
Unsuitable land

5. Pasture biodiversity
These rich pastures host more than 3.5 thousand botanical species, including more than 300 herbs. They are a source of heavy feeders. Thus, the rich vegetation of Kyrgyzstan can be a source of cheap feed for livestock and a major resource for the development of animal husbandry.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

6. From legal framework to sustainable pasture management
In due time, the KR draft law “On Pastures” was widely discussed at various platforms – from local working groups and round tables to national-level meetings.
85% of discussion participants supported the conceptual foundations of the law such as the transfer of responsibility for the pasture management to the level of local government; the establishment of pasture user associations; the introduction of payment for livestock; providing access to pasture based on pasture tickets, etc.
Upon the discussion with the public, coordination with relevant ministries and departments, the draft law was studied by the Government, adopted by Jogorku Kenesh on December 18, 2008, and signed by the President on January 26, 2009.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

7. Pasture management and use before and after the adoption of the law “On Pastures”
Pasture User Association
Chairman
Specialists
Jaiyt committee
Aiyl kenesh deputies
Pasture users
Other stakeholders
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.
District administration
Regional state administration
Local authority
Rural district
Summer pastures
Spring and autumn
Winter pastures

8. Goals and objectives of the law “On Pastures”
The transfer of responsibility and control over state-owned pasture management to local government bodies.
Delegation of pasture management authority to jayit (pasture) committees - executive bodies of pasture user associations.
Establishment of pasture user associations by local communities.
Pasture lease and sublease ban.
Establishing and defining pasture boundaries.
Introduction of fees for pasture use based on livestock numbers.
Ticket-based provision and use of pastures for grazing.
Management and use of pastures in accordance with the relevant plans developed by jaiyt (pasture) committees and the local kenesh (Board)
Pasture use for purposes other than grazing in accordance with the contract.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

9. Optimization of pastoral reform legal framework
In order to strengthen the legal framework for sustainable pasture management, the Kyrgyz law governing the use of pastures and pasture resources has been regularly updated. Recently, the Government adopted a resolution approving the Standard Provision granting the right to use pasture resources for purposes other than grazing, and the Standard Agreement granting the right to use pasture resources for purposes other than grazing.
To revitalize jaiyt committees of pasture user associations, enable them to use pasture resources more efficiently, and strengthen the role of local authorities in implementing state powers, responsibilities and control over the public pasture management , Jogorku Kenesh adopted the Law “On Amendments and Additions to the Code of the Kyrgyz Republic on Administrative Responsibility” of January 27, 2014.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

10. Establishing pasture boundaries between aiyl aimaks
There were meetings of the State Commission for Pasture Boundaries on July 22 and December 14 , 2009
Experts have developed and obtained the approval of the methodology for demarcating external pasture boundaries
A methodological guide has been approved, which defines the procedure and scope of work to establish pasture outer boundaries, tested in 4 pilot aiyl aimaks (municipality)
All PUAs and JCs were explained the procedures of pasture boundaries establishment
Thematic video material was produced and broadcast on national television
Specific organizations have been selected through tender to perform cadastral works
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

11. Animated radial list with picture (Intermediate)
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

12. In accordance with the Law of the Kyrgyz Republic “On pastures”, pasture use shall follow Pasture Management and Use Plans developed by jayit committees and approved by local keneshs
Methodology for the development of Management Plans was tested by the international working group in the Issyk-Kul and Naryn regions and approved by the World Bank.
Methodology was implemented at the PUAs/JCs level in Naryn, Issyk - Kul, Talas, Osh, Jalal - Abad, Batken regions with the participation of young professionals.
Based on the documents developed, the following methodological materials have been designed: Trainer’s Manual to Teach Professionals of Jaiyl Committees to Monitor and Assess Pastures and a Training Module on Monitoring and Assessment for PUAs/JCs.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

13. Pasture Management and Use Plan as a tool for sustainable and ecologically balanced use of the available natural pasture resources
In order to create a methodological framework for the development of Management Plans, together with the Research Institute of Livestock and Pasture (RILP), experts from Switzerland with the support of the International Consultant developed Pasture Assessment Methodology for Specialists, Pasture Assessment Methodology at the level of PUAs and the Pasture Assessment Guide.
Phase I (2010) resulted in the development of the Manual on the Preparation of the Pasture Use Preliminary Plan.
During the next phase ( ), Project Implementation Assistance Unit (PIAU) of the Pasture Department, international consultants, the Swiss partner organization “Agroskop-Shonzha” and RILP experts developed the Guidelines for Communities on Drawing Up Pasture Management Plans which included sections related to the medium-term planning.
During 2013, Pasture Management Plans were implemented in the field. This work was done with the assistance of PIAU and implied a series of activities involving local JCs. At the end of the year, experts monitored the work of jayit committees and checked the availability of Pasture Management Plans.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

14. ARIS
Community Development and Investment Agency made a significant contribution to the pastoral reform, especially in community mobilization, capacity building and implementation of micro-projects.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

15. Number of PUA JCs Animated radial list with picture (Intermediate)
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

16. Animated radial list with picture (Intermediate)
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

17. Jayit Committees improving infrastructure
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

18. Animated radial list with picture (Intermediate)
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

19. Animated radial list with picture (Intermediate)
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

20. Animated radial list with picture (Intermediate)
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

21. Pasture Development Programme for 2012-2015
The Resolution of the Kyrgyz Government No.89 of February 10, 2012 approved the Pasture Development Programme for and the Implementation Plan
Key objectives of the Programme:
Improvement of the welfare of the people of Kyrgyzstan, ensuring food security and preservation of the ecological integrity of grassland eco-systems in the environment.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

22. Expected outcomes and implications
Social aspect:
Major social issues addressed by the pasture reform are as follows:
equity (ensuring equal access to resources and information);
management (organization of resources in the interests of all members of the community);
capacity building (social, technical, managerial, information);
participation (ensuring that decisions and actions take into account the interests of all stakeholders).
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

23. Economic effect
Transfer of pastures to pasture user associations and delegation of powers to manage all kinds of pasture resources to local authorities, along with the preservation of the right to obtain and use income at the level of local communities will contribute to:
Intensive decentralization process and enhanced role of local governments;
Significant revenues to local governments through a system of payment for the use of pasture resources. Every year, local budgets will receive up to 30 million som.
Cheap and environmentally friendly livestock production.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

24. Environmental sustainability
Climatic and natural conditions make Kyrgyzstan a great place for the production of environmentally friendly products, which is particularly relevant in the context of globalization and increased human impact on the environment.
A steady increase in livestock numbers urges the need for comprehensive measures to improve the use of pastures, implement environmentally sustainable forms of economic activity, which would help maintain and improve the condition of ecosystems in the country.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

25. Attraction of investments
Attracting donor investments is an important priority of the pastoral reform; efforts are being made to raise additional funds for the improvement of pastures from international public funds and financial institutions.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

26. Since 2008, the World Bank, International Fund for Agricultural Development (IFAD) and the EU have implemented the project “Agricultural Investments and Services” (AIS). More than 10 million dollars were allocated to improve the infrastructure of pastures and train jaiyt committees of pasture user associations.
Improved pasture infrastructure in more than 450 aiyl aimaks expanded access to intense and remote pastures for over 1 million pasture users. The area of grazing lands has also increased.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

27. Given the positive results of AIS, the World Bank, International Fund for Agricultural Development (IFAD) and other international financial institutions plan to allocate about 80 mln US dollars in the next 5 years; more than half of this money will be spent on improving infrastructure, pasture biodiversity conservation, sustainable pasture management, strengthening of material, technical and human capacity of jaiyt committees of pasture user associations, Pasture Department, and local authorities in pasture management.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

28. The above mentioned international donors have already supported the launch of the project “Development of Livestock and Market” (DLM) in Naryn and Issyk-Kul regions (DLM-1) with an investment of 25 million US dollars; in the near future it is planned to launch DLM- 2 in the southern region of the republic with the total cost of 39 million US dollars and the project “Community Management of Pastures” in the Chui and Talas regions totaling million US dollars, with the support of the World Bank.
Animated radial list with picture
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.

29. Thank you! Animated radial list with picture (Intermediate)
Also on the Animations tab, in the Timing group, do the following:
(Intermediate)
In the Start list, select With Previous.
In the Duration box, enter 1.00 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
To reproduce the SmartArt effects on this slide, do the following:
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
On the Home tab, in the Slides group, click Layout, and then click Blank.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
Also under Gradient stops, customize the gradient stops that you added as follows:
Select the first stop in the slider, and then do the following:
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
In the Position box, enter 0%.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
Select the last stop on the slider, and then do the following:
In the Position box, enter 100%.
To reproduce the animation effects on this slide, do the following:
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.