1. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: The Effect of Slip on the Discharge From Partially Filled Circular and Fully Filled Lens and Figure 8 Shaped Pipes
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
The solution for flow in a partially filled circular pipe is a symmetry of the flow in a fully filled lens or figure 8 shaped pipe

2. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: The Effect of Slip on the Discharge From Partially Filled Circular and Fully Filled Lens and Figure 8 Shaped Pipes
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Comparison of the analytical and numerical solution for the centerline velocity in pipes for four values of α

3. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: The Effect of Slip on the Discharge From Partially Filled Circular and Fully Filled Lens and Figure 8 Shaped Pipes
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Flow contours for analytical no-slip and numerical small slip solutions for various values of α

4. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: The Effect of Slip on the Discharge From Partially Filled Circular and Fully Filled Lens and Figure 8 Shaped Pipes
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Flow discharge as a function of α (fill level) for no-slip, small, and medium slip

5. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: The Effect of Slip on the Discharge From Partially Filled Circular and Fully Filled Lens and Figure 8 Shaped Pipes
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Fill level for maximum discharge as a function of the slip parameter β

6. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: The Effect of Slip on the Discharge From Partially Filled Circular and Fully Filled Lens and Figure 8 Shaped Pipes
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Discharge for small slip normalized by the no-slip case

7. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: The Effect of Slip on the Discharge From Partially Filled Circular and Fully Filled Lens and Figure 8 Shaped Pipes
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Position below the free surface of maximum velocity, also known as the velocity dip phenomenon