Presentation on theme: "BASIC INFORMATION SILESIAN UNIVERSITY OF TECHNOLOGY - partner"— Presentation transcript:
1 BASIC INFORMATION SILESIAN UNIVERSITY OF TECHNOLOGY - partner provides technical education since 1945State university with higher education at 12 faculties: - Faculty of Architecture- Faculty of Automatic Control, Electronics and Computer Science- Faculty of Civil Engineering- Faculty of Chemistry- Faculty of Electrical Engineering- Faculty of Mining and Geology- Faculty of Energy and Environmental Engineering- Faculty of Mathematics and Physics- Faculty of Mechanical Engineering- Faculty of Materials Science and Metallurgy- Faculty of Organisation and Management- Faculty of TransportNumber of students:
2 Surface Engineering Group Modelling and Stereology Group SILESIAN UNIVERSITY OF TECHNOLOGY - partnerDEPARTMENT OF MATERIALS SCIENCESurface Engineering GroupProf. Marek Hetmańczyk – head of the Department of Materials Science,PhD. Eng. Lucjan SwadźbaPhD. Eng.. Bogusław MendalaPhD. Eng. Grzegorz MoskalMSc. Eng. Marek GóralMSc. Eng. Wacław SupernakModelling and Stereology GroupProf. Marek HETMAŃCZYK DSc., PhD., MSc., Eng. – head of the Department of Materials Science,Prof. Jan CWAJNA DSc., PhD., MSc., Eng. – head of the Division of Modelling and Stereology,DSc. Eng. Janusz SZALAPhD. Eng. Janusz ADAMIECPhD. Eng. Jacek CHRAPOŃSKIPhD. Eng. Marian MALIŃSKIPhD. Eng. Janusz RICHTERPhD. Eng. Stanisław ROSKOSZMSc. Eng. Joanna MICHALSKAMSc. Eng. Agnieszka SZCZOTOKKatowice, Krasinskiego 8, POLAND,
3 SURFACE ENGINEERING GROUP MODELLING AND STEREOLOGY GROUP SILESIAN UNIVERSITY OF TECHNOLOGY - partnerMAIN PROJECTSSURFACE ENGINEERING GROUPOveraluminising of MeCrAl(Y,Si) by ARC-PVD Method - EUROPEAN PROJECT COST 522, WP-2, SP-3Thermal Barrier CoatingsOut of Pack AluminisingPVD Coatings for g-TiAlPVD Coatings for Compressor BladesMODELLING AND STEREOLOGY GROUPSurface engineering methods in forming of aluminium-based composite structureWork out of critical elements of aircraft engines from nickel-base alloys with high content of hafnium production technology and put it into practiceWork out of critical stationary elements of aircraft engines from remelted and vacuum casting cobalt-base superalloys production technology and put it into practiceIntermetallic-phases based alloys- technology, structure, properties and applicationWork out of the selected melting and casting parameter and carry out material research of rené77 and rené80 alloys designed for low pressure engine turbine blade
4 SILESIAN UNIVERSITY OF TECHNOLOGY - partner EQUIPMENT Arc - PVD system (PVT-550 type) with modernised evaporator,“Out of pack” aluminising – low pressure laboratory devicePack cementation - laboratory systemVacuum furnace, Leybold-Hereaus, IS-5/111 type, for melting and casting of MeCrAIY targets and superalloys.Vacuum furnace, Balzers - VSG-02 type for small samples,Cyclic Oxidation Device based on Carbolite FurnacesVacuum furnace Carbolite for heat treatment,Furnaces for long time oxidationThermobalance SETARAM for kinetics of oxidation with gaseous analysis,Coatings characterisation: EDX, XRD, SEM, microanalysis, microhardness, thickness etc.MTS System -mechanical properties of coatingsCSEM CALOTESTCSEM Scratch Test (in cooperation)
5 SILESIAN UNIVERSITY OF TECHNOLOGY - partner EQUIPMENT Commercial AnalySIS image analysis software,Commercial Visilog 4.0 (Noesis) image analysis software,Commercial image analysis software Aphelion (ADCIS and Amerinex Applied Imaging),MET-ILO author’s stereolgy and image analysis program for PC (currently being the main aid for PhD and MSc students),Author’s program for profilomertic analysis,Author’s program for complex analysis of thin layers and coatings,Author’s programs for planning experiments and results analysis,Structural analysis: JEOL JEM 100B electron transmission microscope, JEOL JXA 50ADX 7S X-ray microanalyser, JEOL JDX 7S X-ray diffractometer, Hitachi 3400n and 4200 SEMInvestigations of materials properties and phase transformations: Setaram SETSYS thermal analyzers,Zwick hardness tester,Advanced ceramics manufacturing: Union Process atritor mill, FRITCH granulating plate and stirrer, Thermal Technology graphite furnace for sintering in controlled atmospheres at temperatures up to 2600C, Carbolite reactive pipe furnace for processing up to 1600C,Devices and stands for wear, erosion, corrosion and oxidation resistance assessment.