1. Isotope Geochemistry

2. Isotopes Isotopes have different ## of neutrons, and thus a different mass Affect on reactions in small, but real, and provides another measurement of reactions – affected by similar physicochemical parameters! Also a critical tracer – the isotopes can be used to track molecules in a reaction!

4. A reaction or process which selects for one of the stable isotopes of a particular element If the process selects for the heavier isotope, the reaction product is ‘heavy’, the reactant remaining is ‘light’ Isotope fractionation occurs for isotopic exchange reactions and mass-dependent differences in the rates of chemical reactions and physical processes Fractionation

5. Fractionation Factor,  R is the ratio of heavy to light isotopes , or fractionation factor, is the ratio between reactant and product

6. Why a ratio??? Differences between 2 isotopes of one element is VERY small – to measure them individually with enough precision is difficult to impossible for most isotope systems By comparing a sample ratio to a standard ratio, the difference between these two can be determined much more precisely!!

7. Isotope Standards VSMOW – Vienna Standard Mean Ocean Water – bunch of ocean water kept in Austria – O and H standard PDB – Pee Dee Belemnite – fossil of a belemnite from the Pee Dee formation in Canada – C and O CDT – Canyon Diablo Troilite –meteorite fragment from meteor crater in Arizona, contains FeS mineral Troilite – S AIR – Atmospheric air - N

8. Measuring Isotopes While different, isotopes of the same element exist in certain fractions corresponding to their natural abundance (adjusted by fractionation) We measure isotopes as a ratio of the isotope vs. a standard material (per mille ‰) Where R a is the ratio of heavy/light isotope and  is the fractionation factor ‰

9.  is “delta”, and is the isotope ratio of a particular thing (molecule, mineral, gas) relative to a standard times 1000. sometimes called ‘del’  is “delta” and is the difference between two different isotope ratios in a reaction:   =  A -  B Many isotopers are very sensitive about misuses of isotope terminology. Harmon Craig’s immortal limerick says it all: There was was a young man from Cornell Who pronounced every "delta" as "del" But the spirit of Urey Returned in a fury And transferred that fellow to hell

10. Distillation 2 varieties, Batch and Rayleigh distillation dependent on if the products stay in contact and re-equilibrate with the reactants Batch Distillation:  f =  i – (1 – F) 10 3 ln  CO2-Rock where the isotope of the rock (  i ) depends on it’s initial value (  f ) and the fractionation factor Rayleigh Distillation  f -  i =10 3 (F (  – 1) – 1)

11. Temperature effects on fractionation The fractionation factors, , are affected by T (recall that this affects E A ) and defined empirically: Then, As T increases,  decreases – at high T  goes to zero Where A and B are constants determined for particular reactions and T is temp. in Kelvins

12. FRACTIONATION DURING PHYSICAL PROCESSES Mass differences also give rise to fractionation during physical processes (diffusion, evaporation, freezing, etc.). Fractionation during physical process is a result of differences in the velocities of isotopic molecules of the same compound. Consider molecules in a gas. All molecules have the same average kinetic energy, which is a function of temperature.

13. Equilibrium vs. Kinetic fractionation Fractionation is a reaction, but one in which the free energy differences are on the order of 1000x smaller than other types of chemical reactions Just like other chemical reactions, we can describe the proportion of reactants and products as an equilibrium or as a kinetic function

14. Because the kinetic energy for heavy and light isotopes is the same, we can write: In the case of 12 C 16 O and 13 C 16 O we have: Regardless of the temperature, the velocity of 12 C 16 O is 1.0177 times that of 13 C 16 O, so the lighter molecule will diffuse faster and evaporate faster.

15. Equilibrium Fractionation For an exchange reaction: ½ C 16 O 2 + H 2 18 O ↔ ½ C 18 O 2 + H 2 16 O Write the equilibrium: Where activity coefficients effectively cancel out For isotope reactions, K is always small, usually 1.0xx (this K is 1.047 for example)

16. WHY IS K DIFFERENT FROM 1.0? Because 18 O forms a stronger covalent bond with C than does 16 O. The vibrational energy of a molecule is given by the equations: Thus, the frequency of vibration depends on the mass of the atoms, so the energy of a molecule depends on its mass.

17. The heavy isotope forms a lower energy bond; it does not vibrate as violently. Therefore, it forms a stronger bond in the compound. The Rule of Bigeleisen (1965) - The heavy isotope goes preferentially into the compound with the strongest bonds.

18. Equilibrium Fractionation II For a mass-dependent reaction: Ca 2+ + C 18 O 3 2-  CaC 18 O 3 Ca 2+ + C 16 O 3 2-  CaC 16 O 3 Measure  18 O in calcite (  18 O cc ) and water (  18 O sw ) Assumes 18 O/ 16 O between H 2 O and CO 3 2- at some equilibrium T ºC = 16.998 - 4.52 (  18 O cc -  18 O sw ) + 0.028 (  18 O cc -  18 O sw ) 2

19. Empirical Relationship between Temp. & Oxygen Isotope Ratios in Carbonates At lower temperatures, calcite crystallization tends to incorporate a relatively larger proportion of 18 O because the energy level (vibration) of ions containing this heavier isotope decreases by a greater amount than ions containing 16 O. As temperatures drop, the energy level of 18 O declines progressively by an amount that this disproportionately greater than that of the lighter 16 O.

20. Distillation 2 varieties, Batch and Rayleigh distillation dependent on if the products stay in contact and re-equilibrate with the reactants Batch Distillation:  f =  i – (1 – F) 10 3 ln  CO2-Rock where the isotope of the rock (  i ) depends on it’s initial value (  f ) and the fractionation factor Rayleigh Distillation  f -  i =10 3 (F (  – 1) – 1)

21. RAYLEIGH DISTILLATION Isotopic fractionation that occurs during condensation in a moist air mass can be described by Rayleigh Distillation. The equation governing this process is: where R v = isotope ratio of remaining vapor, R v ° = isotope ratio in initial vapor, ƒ = the fraction of vapor remaining and a = the isotopic fractionation factor

22. Effect of Rayleigh distillation on the  18 O value of water vapor remaining in the air mass and of meteoric precipitation falling from it at a constant temperature of 25°C. Complications: 1) Re-evaporation 2) Temperature dependency of 

23. Using isotopes to get information on physical and chemical processes Fractionation is due to some reaction, different isotopes can have different fractionation for the same reaction, and different reactions have different fractionations, as well as being different at different temperatures and pressures Use this to understand physical-chemical processes, mass transfer, temperature changes, and other things…

26. Volatilization calcite + quartz = wollastonite + carbon dioxide CaCO 3 + SiO 2 = CaSiO 3 + CO 2 As the CO 2 is produced, it is likely to be expelled

27. Other volatilization reaction examples…

35. ISOTOPE FRACTIONATION IN THE HYDROSPHERE Evaporation of surface water in equatorial regions causes formation of air masses with H 2 O vapor depleted in 18 O and D compared to seawater. This moist air is forced into more northerly, cooler air in the northern hemisphere, where water condenses, and this condensate is enriched in 18 O and D compared to the remaining vapor. The relationship between the isotopic composition of liquid and vapor is:

36. Assuming that  18 O v = -13.1‰ and  v l (O) = 1.0092 at 25°C, then and assuming  D v = -94.8‰ and  v l (H) = 1.074 at 25°C, then These equations give the isotopic composition of the first bit of precipitation. As 18 O and D are removed from the vapor, the remaining vapor becomes more and more depleted. Thus,  18 O and  D values become increasingly negative with increasing geographic latititude (and altitude.

37. Map of North America showing contours of the approximate average  D values of meteoric surface waters.

38. Because both H and O occur together in water,  18 O and  D are highly correlated, yielding the meteoric water line (MWL):  D  8  18 O + 10

39. Deviation from MWL Any additional fractionation process which affects O and D differently, or one to the exclusion of the other will skew a water away from the MWL plot These effects include: –Elevation effects - (  D -8‰/1000m, -4‰/ºC) –Temperature (  different!) –Evapotranspiration and steam loss –Water/rock interaction (little H in most rocks)

40. Kinetic Fractionation lighter isotopes form weaker bonds in compounds, so they are more easily broken and hence react faster. Thus, in reactions governed by kinetics, the light isotopes are concentrated in the products. Again, isotope reactions can be exchange reactions or mass-dependent chemical or physical reactions – kinetic factors may affect any of these!

41. Kinetic fractionation I – SO 4 2- reduction SO 4 2- + CH 4 + 2 H +  H 2 S + CO 2 + 2 H 2 O This reaction is chemically slow at low T, bacteria utilize this for E in anoxic settings Isotope fractionation of S in sulfide generated by microbes from this process generates some of the biggest fractionations in the environment (-120‰ for S) THEN we need to think about exchange reactions with H 2 S or FeS (aq) as it may continue to interact with other S species

42. S isotopes and microbes The fractionation of H 2 S formed from bacterial sulfate reduction (BSR) is affected by several processes: –Recycling and physical differentiation yields excessively depleted H 2 S –Open systems – H 2 S loss removes 34 S –Limited sulfate – governed by Rayleigh process, enriching 34 S –Different organisms and different organic substrates yield very different experimental  34 S Ends up as a poor indicator of BSR vs. TSR

43. Iron Isotopes Earth’s Oceans 3 Ga had no oxygen and lots of Fe 2+, cyanobacteria evolved, produced O 2 which oxidized the iron to form BIFs – in time the Fe 2+ was more depleted and the oceans were stratified, then later become oxic as they are today This interpretation is largely based on iron isotopes in iron oxides and sulfide minerals deposited at those times (Rouxel et al., 2005) No one has yet bothered to measure how iron isotopes change when iron sulfide minerals precipitate – that’s where we come in…

44. Mass-independent fractionation Mass effects for 3 stable isotopes (such as 18 O, 17 O, and 16 O) should have a mass-dependent relationship between each for any process Deviation from this is mass- independent and thought to be indicative of a nuclear process (radiogenic, nucleosynthetic, spallation) as opposed to a physico- chemical process Found mainly associated with atmospheric chemistry, effect can be preserved as many geochemical reactions in water and rock are mass- dependent

45. S-isotopic evidence of Archaen atmosphere Farquar et al., 2001; Mojzsis et al., 2003 found MIF signal in S isotopes ( 32 S, 33 S, 34 S) preserved in archaen pyrites precipitated before 2.45 Ga Interpreted to be signal from the photolysis of SO 2 in that atmosphere – the reaction occurs at 190-220nm light, indicating low O 2 and O 3 (which very effficiently absorb that wavelength)