1. 1

2. G450.Lab1-001(super)# ? ConfigConfig, use ‘Config help’ for more info analog testModify and view the list of test profiles and analog trunk heal parameters arp Add static ARP entry to arp cache backupBackup, use ‘backup help’ for more info bannerBanner, use ‘banner help’ for more info campon-busyoutCampon-busyout, use ‘campon-busyout help’ for more info captureCapture, use ‘capture help’ for more info clearclear, use ‘clear help’ for more info dirshow files in the system disableDisable, use ‘disable help’ for more info hostnameDisplay or set the new host name InterfaceInterface use ‘interface help’ for more info ip IP, use ‘ip help’ for more info noNo, use ‘no help’ for more info resetReset to restart module safe-removalSafe-removal, use ‘safe-removal help’ for more info setSet, use ‘set help’ for more info showShow, use ‘show help’ for more info HELP ? THE “?” HELPS YOU TO FIND THE RIGHT COMMAND. 2

3. G450-Lab1-001(super) # show pmi Active PMI : interface Vlan 1 (192.168.1.3) Configured PMI : interface Vlan 1 (192.168.1.3) Active PMI6 : interface n/a (n/a) SHOW PMI PMI is the Primary Management Interface(PMI) address is used as the IP address of the G450 to register to the Media Gateway Controller(MGC). 3

4. G450.Lab1-001(super)# show mgc list PRIMARY MGC HOST, Primary Search Time : 1 min(s) IPv4 Address IPv6 Address -------------------------- ---------------------------- 192.168.1.3 -- Not Available – Secondary MGC HOST IPv4 Address IPv6 Address -------------------------- ---------------------------- 192.168.3.3 -- Not Available – -- Not Available – -- Not Available -- -- Not Available – sls disabled Done! SHOW MGC LIST The G450 must be registered with an MGC (S8XX, CLAN) in order to provide. 4

5. G450.Lab1-001(super)# show module SLOTTYPECODESUFFIXHW VintageFW Vintage -------------------------------------------------------------- v1S8300ICCD81 v2--Not Installed – v3--Not Installed— v4AnalogMM711A4698 v5 --Not Installed – V6--Not Installed – V7--Not Installed – V8--Not Installed – V10Mainboard G450D234.6.0(B) SHOW MODULE This command will briefly showcase the media modules in the G450 5

6. G450.Lab1-001(super)# show mm MEDIA MODULE DESCRIPTION: v1 --------------------------------------------------------------------- Type: ICC Description: ICC Media Module Serial Number: UNKNOWN HW Vintage: 8 HW Suffix: D FW Version: 1 No. of ports: 2 Faults: No fault Messages This is an MGC controlled Media Module, check the MGC for additional status information. MEDIA MODULE DESCRIPTION: v2 ---------------------------------------------------------------------- Not Installed MEDIA MODULE DESCRIPTION: v3 ----------------------------------------------------------------------- Not Installed --type q to quit or space key to continue-- SHOW MM THIS COMMAND WILL DISPLAY INFORMATION ABOUT MEDIA MODULES THAT ARE INSTALLED IN THE G450. 6

7. G450.Lab1-001(super)# show ip interface Showing 3 Interfaces USB-Modem is down Internet address is 10.3.248.253, subnet mask is 255.255.255.252 Vlan 1 is up Internet address is 192.168.3.4, subnet mask is 255.255.255.192 Broadcast address is 192.168.3.63 Directed broadcast forwarding is disabled Proxy ARP is disabled Primary management IP interface Services is down Internet address is 192.11.13.6, subnet mask is 255.255.255.252 SHOW IP INTERFACE 7

8. G450.Lab1-001(super)# show ip interface brief Showing 3 Interfaces InterfaceAddressMaskMethodStatus ------------------------------------------------------------------------ USB-Modem10.3.248.25330manualdown Vlan 1192.168.3.426manualup Services192.11.13.630manualdown SHOW IP INTERFACE BRIEF 8

9. G450.Lab1-001(super)# show spantree Spanning tree state is disabled Bridge ID MAC ADDR: b0-ad-aa-f5-7e-ad Bridge ID priority: 32768 Bridge Max Age: 20Bridge Hello Time: 2 Bridge Forward Delay: 15 Tx Hold Count 3 Spanning Tree Version is rapid spanning tree Spanning Tree Default Path Costs is according to common spanning tree PortStateCostPriority --------------------------------------------------- 10/5Disabled19128 10/6Disabled19128 SHOW SPANTREE The Spanning tree protocol prevents the condition known as a bridge loop. Most customers prefer spanning tree to be disabled on the G450. 9

10. G450.Lab1-001(super)# show system Call Controller Time: 10:42:0708 FEB 2016 Serial No: 14TG34557309 Model: G450 HW Ready for FIPS: No Chassis HW Vintage: 1 Chassis HW Suffix: A Mainboard HW Vintage: 2 Mainboard HW Suffix: D Mainboard FW Vintage: 34.6.0 LAN MAC Address: b0:ad:aa:f5:7e:a8 WAN1 MAC Address: b0:ad:aa:f5:7e:a9 WAN2 MAC Address: b0:ad:aa:f5:7e:aa SERVICES MAC address: b0:ad:aa:f5:7e:ab Memory #1: 256MB Compact Flash Memory: No CompactFlash card is installed FSU #1: 400W FSU #2: 400W Media Socket #1 : MP80 VoIP DSP Module Media Socket #2 : Not present Media Socket #3 : Not present SHOW SYSTEM THIS COMMAND WILL CHECK THE HARDWARE SUFFIX, VINTAGE AND SERIAL NUMBER. 10

11. G450.Lab1-001(super)# show faults CURRENTLY ACTIVE FAULTS -------------------------------------------------------------------------------- No Fault Messages Current Alarm Indications, ALM LED is off -------------------------------------------------------------------------------- None Done! SHOW FAULTS Display the information about currently active faults 11

12.  Displays the device temperature. SHOW TEMP 12

13. G450.Lab1-001(super)# show temp Ambient ----------- Temperature : 32C High Warning : 42C Low Warning : -5C SHOW TEMP Displays the device temperature 13