Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 12 Nonrenewable Energy Resources. Fig. 13-1, p. 285.

Similar presentations


Presentation on theme: "Chapter 12 Nonrenewable Energy Resources. Fig. 13-1, p. 285."— Presentation transcript:

1 Chapter 12 Nonrenewable Energy Resources

2 Fig. 13-1, p. 285

3  Energy cannot be created or destroyed (but can change form)  When energy is converted from one form to another, a less useful form results

4  high-quality – concentrated and has great ability to do work … fossil fuels, electricity, nuclear fuel, concentrated sunlight  low-quality – dispersed with little ability to do work … low temperature heat

5  total amount of useful energy in a fuel minus the energy used to find, process, concentrate, and transport the fuel

6  power is the amount of work done over time  the most common unit of power is the kilowatt- hour (kWh)  the BTU is the unit of energy used in the U.S. – most other countries use the joule  kilo = 1,000  mega = 1,000,000  giga = 1,000,000,000

7  Commercial energy sources- those that are bought and sold, such as coal, oil and natural gas.  Subsistence energy sources- those gathered by individuals for their own use such as wood, charcoal and animal waste. Energy Use

8 Fig. 13-3, p. 287

9 Process of Energy Use

10 Overall Fuel Efficiency of U.S. Automobiles

11 Electricity Generation

12  The burning fuel from coal transfers energy to water, which becomes steam.  The kinetic energy contained within the steam is transferred to the blades of a turbine, a large device that resembles a fan.  As the energy in the steam turns the turbine, the shaft in the center of the turbine turns the generator.  This mechanical motion generates energy.  Coal power plants are 35% efficient Electricity Generation

13 Where our electricity comes from

14  Cogeneration- using a fuel to generate electricity and to produce heat.  Example- If steam is used for industrial purposes or to heat buildings it is diverted to turn a turbine first.  This improves the efficiency to as high as 90%. Cogeneration

15  Coal- a solid fuel formed primarily from the remains of trees, ferns, and other plant materials that were preserved 280-360 million years ago.  Four types of coal ranked from lesser to greater age, exposure to pressure, and energy content.  These four types are: lignite, sub-bituminous, bituminous, and anthracite.  The largest coal reserves are in the United States, Russia, China, and India. Coal

16

17 AdvantagesDisadvantages Energy-denseContains impurities PlentifulRelease impurities into air when burned Easy to exploit by surface miningTrace metals like mercury, lead, and arsenic are found in coal Technological demands are smallCombustion leads to increased levels of sulfur dioxide and other air pollutants into the atmosphere. Economic costs are lowAsh is left behind Easy to handle and transportCarbon is released into the atmosphere which contributes to climate change Needs little refining Advantages and Disadvantages of Coal

18  Petroleum- a mixture of hydrocarbons, water, and sulfur that occurs in underground deposits.  Oil and gasoline make this ideal for mobile combustion, such as vehicles.  Formed from the remains of ocean-dwelling phytoplankton that died 50-150 million years ago.  Countries with the most petroleum are Saudi Arabia, Russia, the United States, Iran, China, Canada, and Mexico. Petroleum (Crude Oil)

19 Petroleum

20 Fig. 13-6, p. 290 Diesel oil Asphalt Grease and wax Naphtha Heating oil Aviation fuel Gasoline Gases Furnace Heated crude oil

21  OPEC  Energy Crisis 1973, 1979  Gulf Wars  Peak Oil  ANWR

22 AdvantagesDisadvantages Convenient to transport and useReleases carbon dioxide into atmosphere Relatively energy-densePossibility of leaks when extracted and transported Cleaner-burning than coal Releases sulfur, mercury, lead, and arsenic into the atmosphere when burned Advantages and Disadvantages of Petroleum

23  Tar sand (Bitumen)  Shale oil

24 Fig. 13-11, p. 294

25 AdvantagesDisadvantages Moderate cost (oil sand) Large potential supplies, especially oil sands in Canada High cost (oil shale) Low net energy yield Large amount of water needed for processing Severe land disruption from surface mining Water pollution from mining residues Air pollution when burned CO 2 emissions when burned Easily transported within and between countries Efficient distribution system in place Trade-Offs Heavy Oils from Oil Shale and Oil Sand Technology is well developed Fig. 13-12, p. 295

26  Natural gas- exists as a component of petroleum in the ground as well as in gaseous deposits separate from petroleum.  Contains 80 to 95 percent methane and 5 to 20 percent ethane, propane, and butane. Natural Gas

27 AdvantagesDisadvantages Contains fewer impurities and therefore emits almost no sulfur dioxide or particulates When unburned, methane escapes into the atmosphere Emits only 60% as much carbon dioxide as coal Exploration of natural gas has the potential of contaminating groundwater Advantages and Disadvantages Natural Gas

28  Oil sands- slow-flowing, viscous deposits of bitumen mixed with sand, water, and clay.  Bitumen (tar or pitch)- a degraded type of petroleum that forms when a petroleum migrates close to the surface, where bacteria metabolize some of the light hydrocarbons and others evaporate. Other Fossil Fuels

29

30  Hubbert curve- a graph that shows the point at which world oil production would reach a maximum and the point at which we would run out of oil. The Hubbert Curve

31  If current global use continues, we will run out of conventional oil in less than 40 years.  Coal supplies will last for at least 200 years, and probably much longer. The Future of Fossil Fuel Use

32  Fission- a nuclear reaction in which a neutron strikes a relatively large atomic nucleus, which then splits into two or more parts. Nuclear Energy

33 Nuclear Reactors

34  Fuel rods- the cylindrical tubes that house the nuclear fuel used in a nuclear power plant.  Nuclear power plants work by using heat from nuclear fission to heat water. This water produces the steam to turn the turbine, which turns a generator.  Control rods- cylindrical devices that can be inserted between the fuel rods to absorb excess neutrons, thus slowing or stopping the fission reaction. Nuclear Reactors

35 AdvantagesDisadvantages No air pollution is producedPossibility of accidents Countries can limit their need for imported oil Disposal of the radioactive waste Advantages and Disadvantages of Nuclear Energy

36  fuel enrichment  U-238, U-235  Plutonium 239  half-lives

37  Radioactive waste- once the nuclear fuel can not produce enough heat to be used in a power plant but it continues to emit radioactivity.  This waste must be stored in special, highly secure locations because of the danger to living organisms. Radioactive Waste

38  on-site storage  long-term solutions  Yucca Mountain  plant decommissioning

39 What if something goes wrong?

40  Three Mile Island – worst U.S. accident, PA, 1979  Chernobyl – worst accident in the world, the Ukraine, 1986  Fukushima, 2011

41

42

43

44

45

46 Fukishima

47

48

49

50

51

52

53  Nuclear fusion- the reaction that powers the Sun and other stars. This occurs when lighter nuclei are forced together to produce heavier nuclei and heat is released.  Fusion is a promising, unlimited source of energy in the future, but so far scientists have had difficulty cotaining the heat that is produced. Fusion


Download ppt "Chapter 12 Nonrenewable Energy Resources. Fig. 13-1, p. 285."

Similar presentations


Ads by Google