Presentation is loading. Please wait.

Presentation is loading. Please wait.

AC Current An AC circuit consists of a combination of circuit elements and an AC generator or source The output of an AC generator is sinusoidal and varies.

Similar presentations


Presentation on theme: "AC Current An AC circuit consists of a combination of circuit elements and an AC generator or source The output of an AC generator is sinusoidal and varies."— Presentation transcript:

1 AC Current An AC circuit consists of a combination of circuit elements and an AC generator or source The output of an AC generator is sinusoidal and varies with time according to the following equation V = V0 sin 2ƒt V is the instantaneous voltage V0 is the maximum voltage of the generator ƒ is the frequency at which the voltage changes, in Hz

2 AC Generators Basic operation of the generator
As the loop rotates, the magnetic flux through it changes with time This induces an emf and a current in the external circuit The ends of the loop are connected to slip rings that rotate with the loop Connections to the external circuit are made by stationary brushed in contact with the slip rings

3 AC Generators The emf generated by the rotating loop can be found by
ε = 2 (B ℓ v) ε = εmax when loop is parallel to the field ε = 0 when when the loop is perpendicular to the field

4 AC Generators, final Original AC voltage
Increase B, Area, or # of turns Increase frequency of rotation

5 Resistor in an AC Circuit
The graph shows the current through and the voltage across the resistor The current and the voltage reach their maximum values at the same time The current and the voltage are said to be in phase

6 rms Current and Voltage
The rms current is the direct current that would dissipate the same amount of energy in a resistor as is actually dissipated by the AC current Alternating voltages can also be discussed in terms of rms values o rms 2 I = Io = peak or max current rms 2 V = Vo = peak voltage

7 Ohm’s Law in an AC Circuit
rms values will be used when discussing AC currents and voltages AC ammeters and voltmeters are designed to read rms values Ohm’s Law for a resistor, R, in an AC circuit ΔVrms = Irms R

8 Example An AC voltage source has a peak output of 200V. If the source is connected to a 100W resistor, find the rms current. rms 2 V = 2 200 V = = 141 V rms V I = R = 141 V / 100 W = 1.41 A What is the max current? o rms 2 I = o 2 I 1.41 A = Io = 2A

9 Transformers

10

11 Transformers An AC transformer consists of two coils of wire wound around a core of soft iron The side connected to the input AC voltage source is called the primary and has N1 turns Schematic symbol for a transformer

12 Shell type

13 Transformers, 2 The other side, called the secondary, is connected to a resistor and has N2 turns Current passing through the primary coil induces a magnetic field (magnetic flux) in the iron core. The magnetic flux is transmitted to the other side and induces a voltage in the secondary coil.

14 Transformers, 3 The voltages are related by Where:
Vp = Primary coil voltage Vs = Secondary coil voltage Np = # of turns of wire in the Primary coil Ns = # of turns of wire in the Secondary coil

15 Transformers, 4 When Ns > Np, the transformer is referred to as a step up transformer (more voltage out) When Np > Ns, the transformer is referred to as a step down transformer (less voltage out) *This works because there is a direct relationship between the # of turns and the induced voltage

16 Transformer, 5 The power input into the primary equals the power output at the secondary I1ΔV1 = I2ΔV2 You don’t get something for nothing (conservation of energy) This assumes an ideal transformer In real transformers, power efficiencies typically range from 90% to 99%

17 Electrical Power Transmission
When transmitting electric power over long distances, it is most economical to use high voltage and low current Minimizes I2R power losses (P = VI = I2R) In practice, voltage is stepped up to about 230, 000 V at the generating station and stepped down to V at the distribution station and finally to 120 V at the customer’s utility pole


Download ppt "AC Current An AC circuit consists of a combination of circuit elements and an AC generator or source The output of an AC generator is sinusoidal and varies."

Similar presentations


Ads by Google