1. ARM and GPS Based Transformer monitoring system with area Identification Student Name USN NO Guide Name H.O.D Name Name Of The College & Dept

2.  CONTENTS 1.Abstract 2.Objectives 3.Block diagram 4.Methodology 5.Advantages & disadvantages 6.Applications 7. Conclusion

3. 1.ABSTRACT: Nowadays the automation has become a basic need for the industries. Induction Motors are the nerves of many industries. Hence Industrial automation is required for precise and accurate operation. This system proposes a wireless monitoring system for an induction motor based on Zigbee communication protocol for safe and economic data communication in industrial fields where the wired communication is more expensive or impossible due to physical conditions. A module sensors monitors the parameters of induction machine and transmit the data through Zigbee Protocol. A ARM based system is used for collecting and storing data and accordingly generating control signal to stop or start the induction machine wireless through interface developed with Zigbee.

4. 2.OBJECTIVES: Single Phase and Three Phase Induction machines are very popular in industries because of their vast applications. Hence it becomes necessary to protect them against faults so as to ensure uninterrupted operation and functioning. Various parameter monitoring in this project..

5. 3.BLOCK DIAGRAM :

6. 4. METHODOLOGY: Distributed transformers are prone to damages due to the increase in the oil temperature and short circuit in the transformer. The transformers are to be monitored very cautiously during these situations. The proposed system consists of a monitoring unit that is connected with the distribution transformer for the purpose of monitoring the same. Hence, we introduce a simulation model which details the operation of the system to rectify the mentioned problem. We have designed a system based on ARM controller LPC2148 that monitors and controls the voltage of a distribution transformer present in a substation. The monitored output will be sent to authorized person at the main station that is at a remote place, through GSM which has a location took with the help of gps Communication. The parameters monitored at the distribution transformer are compared with the rated values of the transformer. The software in the ARM compares the received values with the rated measurements of the distribution transformer and shuts down the transformer so that it can be prevented from damages and Performances can be enhanced quiet to a remarkable level. And also the specified project will give information if any person enters to transformer area using infrared sensors.

7. 5. ADVANTAGES & DISADVANTAGES:  ADVANTAGES: 1.Cost efficiency. 2.Integration. 3.minimal losses. 4.Security of supply

8. DISADVANTAGES : 1.The electricity network only (not gas) it concerns both distribution and transmission levels. 2.It increases the cost whereas digital systems reduce the cost of system.

9. 6.APPLICATIONS: 1.This project can be implement for Health Care. 2.This project can be implement in Home Automation. 3.For Security services we can use this project. 4.Communication and device discovery. 5.In Industrial applications.

10. 7.CONCLUSION: With the help of this study, a parameter monitoring system for transformers based on Gps and Gsm is achieved and tested successfully. The system developed is capable to perform such operations as running the motor, stopping it, measuring, monitoring and controlling the most parameters of the transformer like oil and short circuit. All of these values can be transferred to the concern people, displayed on the interface, represented graphically; Monitoring the basic parameters of the induction motors were examined and achieved in various ways. A new Gps and Gsm technology is a new wireless protocol is used for the communication.

11. THANK YOU