1. How To Set Up A Wireless Network

2. What is a wireless network  A wireless network is a computer network that allows computers and other electronic devices to communicate with each other and the internet without physically being connected to each other. This usually accomplished using radio waves  A router is the central device in a wireless network, acting as the facilitator of communication between computers and the internet.

3. Reasons to have a wireless network  If you have multiple computers, it allows for all of them to access the internet without having wires all over the place  If you have a laptop, you can get full use of its portability  Allows computers to share files with each other

4. Reasons not to have network  If you only have one desktop computer that is close to your access point.  Wireless networks can be insecure and some jobs do not allow employees to maintain a wireless network at home.

5. Required materials to set up a wireless network  Wireless Router - Linksys, D-Link, NetGear, Buffalo or Korean models like IP- Time, Anygate, or Netis.  Computer with Ethernet port and wireless card, or USB dongle.  Access to Internet  Two Ethernet cords

6. The D-Link WBR2300 Router

7. Setting up a D-Link WBR2310 Router - Physical Setup 1.Find a convenient location for the router. This should be somewhere close to your modem or other source of internet. 2.Plug router into power outlet with provided power cord.

8. Setting up a D-Link WBR2310 Router - Physical Setup 3.Take one of the Ethernet cords and run that from your cable modem or source of internet to the WAN port on the back of the router. 4.Take the other Ethernet cord and run that from your computer to one of the LAN ports on the back of the router. These ports are shown in the next figure

9. Setting up a D-Link WBR2310 Router - Location of ports

10. Setting up a Router: Software Setup 5.Open up a web browser on the computer 6.Type the router’s IP address into address bar. The IP address can be found with the router’s documentation and usually starts with 192.168 (our Buffalo is 192.168.11.1, and IPTime is 192.168.0.1)

11. Setting up a Router: Software Setup 7. Type in the username and password when prompted. This again can be found in the documentation. 8. The Username and password often must be assigned when using the router for the first time. Many routers use “admin” as the initial Username, with the Password left blank. This should be changed.

12. Setting up our Buffalo WZR-HP-G300NH2

13. Step 1, Logging in:  Type: 192.168.11.1 where you would normally type a website addresss, and hit ENTER.192.168.11.1

14. Notice:  If the router has been set-up previously, just choose “Setup” from the BUFFALO menu, and “Basic Setup.” There will be a “Setup Assistant” start button. Click that to begin the setup process.

15. Step 2, Setting Username and Password  Delete the current Router Username and replace it with: ADMIN  Delete the Router Password and replace it with: Hansung1  Be sure to remember capital letters when used. For example, “H” in Hansung1  Click Change Password.

16. Internet Connection  The Internet Connection can be chosen here.  For most home internet uses, you’ll probably choose Automatic Configuration – DHCP  Note: Computers at Hansung are on a Static IP, and require the entry of several specific numbers to work.

17. Network Settings  In the Network Settings menu, you can just click Next.

18. Wireless Settings  Here, you choose several options. Some do not need to be chagned.  First, change the Wireless Network Name (SSID) to whatever you want. This will be the name broadcast to your wireless device  Next, change the Security Mode to: WPA2 Personal and click Next.

19. Wireless Settings 2  The WPA Algorithm is simply the kind of encryption you choose to add. TKIP and AES are choices, or you can choose to add both. For most home uses, AES is great.  The WPA Shared Key is the password you will need to enter to use the Wifi on your computer or handphone.

20. Other Settings  In this menu, you can change your security mode, if you didn’t already. Choose WPA AES. You don’t need to change anything else. Click Apply Settings.  AOSS is simply Buffalo’s proprietary setup software which you can download from the Android or Apple stores to make it easy to set all of this up by app.

21. You’re Done  Check to see if your internet works or not.

22. Static IP Setup page  The Static IP set-up requires a lot of numbers. You have to enter them under WAN Setup