1. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.1a (p. 560) Radial ball bearing (deep-groove or "Conrad" type). (Courtesy New Departure- Hyatt Bearing Division, General Motors Corporation.) (Continued on next slide.)

2. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.1bc (cont.)

3. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.2 (p. 561) Relative proportions of bearings of different series.

4. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.3ab (p. 562) Representative types of ball bearings, in addition to the deep-groove type shown in Figure 14.1. (b,f, Courtesy Hoover-NSK Bearing Company, c, Courtesy New Departure-Hyatt Bearing Division, General Motors Corporation. (Continued on next two slides.)

5. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.3c (cont.)

6. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.3d-f (cont.)

7. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.4 (p. 462) Bearings with seals and shields. (Courtesy New Departure-Hyatt Bearing Division, General Motors Corporation.)

8. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.5 (p. 564) Cylindrical roller bearings. (Courtesy Hoover-NSK Bearing Company.)

9. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.6 (p. 565) Spherical roller bearings. (a, Courtesy McGill Manufacturing Company, Inc., Bearing Division, Valparaiso, Indiana, b, c, Courtesy Hoover-NSK Bearing Company.)

10. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.7 (p. 566) Tapered roller bearings. (Courtesy The Torrington Company.)

11. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.8 (p. 567) Tapered roller bearing geometry.

12. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.9 (p. 568) Needle roller bearings. (Courtesy The Torrington Company.)

13. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.10a-c (pp. 569-571) Sample special bearings. (a, g, h, Courtesy New Departure-Hyatt Bearing Division, General Motors Corporation; b, c, Courtesy Reliance Electric Company; f, Courtesy The Torrington Company, i, j, Courtesy Thompson Industries, Inc.)

14. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.10d-g (cont.)

15. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.10h-i (cont.)

16. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.10j (cont.)

17. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.11 (p. 573) Shaft and housing shoulder dimensions.

18. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Table 14.1a (pp. 573-574) Bearing Dimensions (Continued on next four slides.)

19. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Table 14.1b (cont.)

20. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Table 14.1c (cont.)

21. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Table 14.1d (cont.)

22. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Table 14.1e (cont.)

23. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Table 14.2a (p. 577) Bearing Rated Capacities. C, for 90 X 10 6 Revolution Life with 90 Percent Reliability (Continued on next slide.)

24. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Table 14.2b (cont.)

25. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.12 (p. 579) General pattern of bearing fatigue-life distribution.

26. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.13 (p. 579) Reliability factor K r.

27. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Table 14.3 (p. 581) Application Factors K a.

28. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Table 14.4 (p. 581) Representative Bearing Design Lives

29. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.14 (p. 582) Radial- and angular-contact ball bearings.

30. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.15 (p. 584) Radial-contact bearing.

31. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.16 (p. 585) Radial-contact bearing subject to a varying load.

32. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.17 (p. 586) Bearings mounted so that each bearing takes thrust in one direction.

33. Fundamentals of Machine Component Design, 4/E by Robert C. Juvinall and Kurt M. Marshek Copyright © 2006 by John Wiley & Sons, Inc. All rights reserved. Figure 14.18 (p. 587) Bearings mounted so that left bearing takes thrust in both directions.