Download presentation
Presentation is loading. Please wait.
Published byPhilomena Thornton Modified over 8 years ago
1
Date of download: 5/29/2016 Copyright © ASME. All rights reserved. From: The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments J. Eng. Mater. Technol. 2011;133(2):021011-021011-7. doi:10.1115/1.4003112 Schematic of the welding setup of four P911 pipe sections using three different filler metals differing in creep strength Figure Legend:
2
Date of download: 5/29/2016 Copyright © ASME. All rights reserved. From: The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments J. Eng. Mater. Technol. 2011;133(2):021011-021011-7. doi:10.1115/1.4003112 Weld groove geometry (unit: mm) and applied welding sequence for all three butt welds Figure Legend:
3
Date of download: 5/29/2016 Copyright © ASME. All rights reserved. From: The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments J. Eng. Mater. Technol. 2011;133(2):021011-021011-7. doi:10.1115/1.4003112 Schematic of the specimen location within the butt-welded joint (left) and parametric drawing of a creep specimen with ridges for integral strain measurement. Reference length L0 and diameters are adjusted according to the applied force and the desired stress level. Figure Legend:
4
Date of download: 5/29/2016 Copyright © ASME. All rights reserved. From: The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments J. Eng. Mater. Technol. 2011;133(2):021011-021011-7. doi:10.1115/1.4003112 Inverse pole figure of an area close to the failed region in specimen M120. Clusters of black pixels indicate the locations of voids. Figure Legend:
Similar presentations
© 2024 SlidePlayer.com Inc.
All rights reserved.