1. Chapter 13 - States of Matter
Kinetic Theory and the Nature of Glass
All matter is composed of tiny particles in constant motion.
For Gases: (PME)
Made up of particles.
Particles moving rapidly in constant, random motion.
All collisions are perfectly elastic. (No energy lost.)
Oxygen trivias: (Gas Trivias)
1. Diameter of O2 molecule:
0.339 nm = meters! (very small)
2. Average distance traveled between collisions: 106 nm
(Mean free path)
Travels over 300x its own diameter before it hits something else. (mostly empty space)

2. Oxygen trivias: (Gas Trivias)
1. Diameter of O2 molecule:
.339 nm = meters! (very small)
2. Average distance traveled between collisions: 106 nm
(Mean free path)
Travels over 300x its own diameter before it hits something else. (mostly empty space)
3. Average velocity of m/s (~1000mph!)
(very fast)
4. Frequency of collisions 4.5 billon collisions per second
(A lot of collisions)

3. Gas Particles
Gas pressure is caused by billions of gas particles colliding with an object at the same time.
When no particles are present  empty space  vacuum
Atmospheric pressure - gas particles in the air colliding with objects.
Standard atmospheric pressure (at 0° C):
760 mm of Hg Or
1 atmosphere
101.3 kPa
(Pascal is the SI unit of pressure.)
Barometer – device used to measure atmospheric pressure.

4. Ex 1) Convert 1400 mm Hg to kPa & atm.= =

5. Ex 1) Convert 1400 mm Hg to kPa & atm.=
kPa
mm Hg
atm =

6. Heat something temp goes up
energy goes into speeding up the particles (increases KE)
Temperature - measure of average Kinetic Energy
Thermometer
What would happen if cooled
thermometer until there was no
molecular motion?
Absolute zero – temp at which there’s no molecular motion.
0 Kelvin ( - 273o C) (not achievable)
Outer space 2 – 4 K, Lab conditions K
At 200 K, gas particles have twice the KE of these at 100K.
Ch13 HW#

7. Ch 13 HW#1 1-5
1.Convert 190 mm Hg to a) kPa b)atm
2. Mt. Everest pressure is 33.7 kPa. Greater or less than .25atm?
3. Explain relationship between absolute temp & KE of particles.

8. Ch 13 HW#1 1-5
1.Convert 190 mm Hg to a) kPa b)atm
a)190 mm Hg kPa = 25.1 kPa
760 mm Hg
b)190 mm Hg 1 atm = .25 ATM
2. Mt. Everest pressure is 33.7 kPa. Greater or less than .25atm?
3. Explain relationship between absolute temp & KE of particles.

9. Ch 13 HW#1 1-5
1.Convert 190 mm Hg to a) kPa b)atm
a)190 mm Hg kPa = 25.1 kPa
760 mm Hg
b)190 mm Hg 1 atm = .25 ATM
2. Mt. Everest pressure is 33.7 kPa. Greater or less than .25atm?
33.7 kPa atm = .33 ATM
101.3 kPa
3. Explain relationship between absolute temp & KE of particles.

10. Ch 13 HW#1 1-5
1.Convert 190 mm Hg to a) kPa b)atm
a)190 mm Hg kPa = 25.1 kPa
760 mm Hg
b)190 mm Hg 1 atm = .25 ATM
2. Mt. Everest pressure is 33.7 kPa. Greater or less than .25atm?
33.7 kPa atm = .33 ATM
101.3 kPa
3. Explain relationship between absolute temp & KE of particles.
Directly related as temp goes up, so does KE.
(From 100K to 200K (temp doubled), the KE doubles)

11. 4. How does average KE of H20 affected as you pour hot into
4. How does average KE of H20 affected as you pour hot into equal amount of cold H20?
5. By what factor does ave KE go up as gas increases
from 300K to 900K?

12. 4. How does average KE of H20 affected as you pour hot into
4. How does average KE of H20 affected as you pour hot into equal amount of cold H20?
Hot cools as cold warms as they reach middle temp. Average stays constant.
5. By what factor does ave KE go up as gas increases
from 300K to 900K?

13. 4. How does average KE of H20 affected as you pour hot into
4. How does average KE of H20 affected as you pour hot into equal amount of cold H20?
Hot cools as cold warms as they reach middle temp. Average stays constant.
5. By what factor does ave KE go up as gas increases
from 300K to 900K? 3X

14. Ch13.2 - The Nature of Liquids+
Particles in liquids are free to move around.
- They have enough KE that the intermolecular forces are not strong enough
to form bonds and make a structure.
- Don’t have enough KE to be completely free of each other.

15. Evaporation
- occurs at the surface of the liquid
- liquid to gas
- faster at higher temps because more KE.
- each evaporating particle has to gain enough energy
to be able to break the intermolecular forces
holding it.

16. Evaporation
- occurs at the surface of the liquid
- liquid to gas
- faster at higher temps because more KE.
- each evaporating particle has to gain enough energy
to be able to break the intermolecular forces
holding it.
- the particles that leave first during evaporation
are the first ones – high KE (high temp)
The ones left are slower – low KE(low temp)
so evaporation causes the liquid to become cooler.
- cooling process

17. Vapor pressure
As more particles evaporate, creates a pressure.
- each liquid has a unique pressure for each temp.
- slower particles can condense back to liquid.
Dynamic equilibrium H20(l) H20(g)
(both condensation and evaporation at same time.)

18. Boiling Point of Liquid
Boiling Point - special point at which the vapor pressure
of the liquid is equal to the external pressure.
- Normal boiling point - temp at which a liquid boils at
standard pressure, 101.3kPa.
(Water is 100°C at 101.3kPa.)
- the temp of a liquid never rises above
its boiling point temp.
100
80 chloroform water
VP ethanol ethanoic acid
(kPa)40 20
Temp (°C)
FIRE
Ch13 HW#2 6-9

19. Ch13 HW#2 6 – 9
6. Explain vapor pressure.
7. What happens when v.p. reaches ATM pressure?
8. What is the boiling point of water?
9. a)B.P. of water at 60kPa: ____
b)B.P. of water at 80kPa: ____
c)What pressure water boil at 60°C:___
d)For each liquid, what pressure is required to boil at 60°C:

20. Ch13 HW#2 6 – 9
6. Explain vapor pressure.
As the substance evaporates, it creates a pressure above it.
7. What happens when v.p. reaches ATM pressure?
8. What is the boiling point of water?
9. a)B.P. of water at 60kPa: ____
b)B.P. of water at 80kPa: ____
c)What pressure water boil at 60°C:___
d)For each liquid, what pressure is required to boil at 60°C:

21. Ch13 HW#2 6 – 9
6. Explain vapor pressure.
As the substance evaporates, it creates a pressure above it.
7. What happens when v.p. reaches ATM pressure?
The substance starts to boil.
8. What is the boiling point of water?
9. a)B.P. of water at 60kPa: ____
b)B.P. of water at 80kPa: ____
c)What pressure water boil at 60°C:___
d)For each liquid, what pressure is required to boil at 60°C:

22. Ch13 HW#2 6 – 9
6. Explain vapor pressure.
As the substance evaporates, it creates a pressure above it.
7. What happens when v.p. reaches ATM pressure?
The substance starts to boil.
8. What is the boiling point of water?
It depends on the pressure! At standard atm pressure, its 100°C.
100
chloroform water
VP ethanol ethanoic acid
(kPa)40 20
Temp (°C)
9. a)B.P. of water at 60kPa: ____
b)B.P. of water at 80kPa: ____
c)What pressure water boil at 60°C:___
d)For each liquid, what pressure is required to boil at 60°C:
chloroform : ____ ethanol :____
water :____ ethanoic acid:____

23. Ch13 HW#2 6 – 9
6. Explain vapor pressure.
As the substance evaporates, it creates a pressure above it.
7. What happens when v.p. reaches ATM pressure?
The substance starts to boil.
8. What is the boiling point of water?
It depends on the pressure! At standard atm pressure, its 100°C.
100
chloroform water
VP ethanol ethanoic acid
(kPa)40 20
Temp (°C)
9. a)B.P. of water at 60kPa: (90°C)
b)B.P. of water at 80kPa: (95°C)
c)What pressure water boil at 60°C:(20kPa)
d)For each liquid, what pressure is required to boil at 60°C:
chloroform : (100kPa) ethanol : (50kPa)
water : (20kPa) ethanoic acid: (10kPa)

24. - particles in solids are packed together in highly organized
Ch13.3 – The Nature of Solids
- particles in solids are packed together in highly organized
3-D patterns. Call them crystalline solids.
- vibrate about fixed positions
- when heat a solid, vibrate more rapidly,
break structure, melts.
- ionic solids have high melting points - stronger bonds.
NaCl 801°C
- molecular solids (covalent bonds) - weaker bonds,
lower melting points.
- some solids decompose instead of melt. (like wood)

25. Crystals have different structures based on the sizes
of the particles bonding. (table of crystals pg398.)
- crystals have repeating patterns. The simplest
repeating pattern is called the unit cell.
Simple Cubic - (usually only 1 type of atom)
Atoms located at corners of a cube.
Body Centered Cube - (usually only 1 type of ions)
2 types of atoms are about the same size,
so crystal forms shape where 1 type
is at corners of cube, other is located in center.
Face Centered Cubic - (usually 2 types of atoms)
1 is a lot larger than other , small ones can
fill the holes between large ones on faces of
cube. Because of closeness of atoms,
strong bonds, high m.p. Ex: NaCl

26. Allotropes – different structures of the same element.
Ex: Carbon has diamond and graphite
Not all solids have a crystalline form.
Amorphous solid – lack an ordered internal structure.
Exs: glass, butter
Sometimes referred to as super-cooled liquids.
Sublimation – solid that goes directly to the gaseous phase.
Exs: dry ice, moth balls, popsicles, solid air fresheners.

27. Phase Diagram - Water
101.3
22,100
374
100
Solid
Liquid
Gas
Pressure
(kPa)
Temperature (C°)

28. Phase Diagram - Water
101.3
22,100
Critical Point
374
100
Solid
Liquid
Gas
Triple Point
Pressure
(kPa)
Temperature (C°)
Critical point for water – At 374°C and 22,100kPa is the last point where
water can still be condensed to a liquid.
Triple point – all 3 phases are in equilibrium

29. Phase Diagram - Water
101.3
22,100
Critical Point
374
100
Solid
Liquid
Gas
Triple Point
Pressure
(kPa)
Temperature (C°)
Ex: What is the physical state of H2O at 50°C and 70 kPa?_____
Name a temp and pressure that H2O boils at: _____________
Ch13 HW#3 10 – 15

30. Ch13 HW#3 10 – 15
10) Name a physical property to distinguish molecular solid from ionic. 11) Substance goes directly from solid to gas: _________ 12) Popsicle in freezer for long time, wrapper sticky - Why? 13) Triple point:

31. Ch13 HW#3 10 – 15
10) Name a physical property to distinguish molecular solid from ionic. melting point 11) Substance goes directly from solid to gas: _________ 12) Popsicle in freezer for long time, wrapper sticky - Why? 13) Triple point:

32. Ch13 HW#3 10 – 15
10) Name a physical property to distinguish molecular solid from ionic. melting point 11) Substance goes directly from solid to gas: sublimation 12) Popsicle in freezer for long time, wrapper sticky - Why? 13) Triple point:

33. Ch13 HW#3 10 – 15
10) Name a physical property to distinguish molecular solid from ionic. melting point 11) Substance goes directly from solid to gas: sublimation 12) Popsicle in freezer for long time, wrapper sticky - Why? The ice in the popsicle sublimes 13) Triple point:

34. Ch13 HW#3 10 – 15
10) Name a physical property to distinguish molecular solid from ionic. melting point 11) Substance goes directly from solid to gas: sublimation 12) Popsicle in freezer for long time, wrapper sticky - Why? The ice in the popsicle sublimes 13) Triple point: Point where all three phases in equilibrium

35. Phase Diagram - Water
101.3
22,100
Critical Point
374
100
Solid
Liquid
Gas
Triple Point
Pressure
(kPa)
Temperature (C°)
14) Physical state from graph: a) 80°C & 100 kPa ____ b) 20°C & 20 kPa ____ c) .005°C & 20 kPa ____ 15) Water boils at 100°C at pressure of kPa a) Name another set __________ b) Name a temp & pressure where water sublimes __________

36. Phase Diagram - Water
101.3
22,100
Critical Point
374
100
Solid
Liquid
Gas
Triple Point
Pressure
(kPa)
Temperature (C°)
14) Physical state from graph: a) 80°C & 100 kPa liquid b) 20°C & 20 kPa liquid/gas c) .005°C & 20 kPa solid 15) Water boils at 100°C at pressure of kPa a) Name another set __________ b) Name a temp & pressure where water sublimes __________

37. Phase Diagram - Water
101.3
22,100
Critical Point
374
100
Solid
Liquid
Gas
Triple Point
Pressure
(kPa)
Temperature (C°)
14) Physical state from graph: a) 80°C & 100 kPa liquid b) 20°C & 20 kPa liquid/gas c) .005°C & 20 kPa solid 15) Water boils at 100°C at pressure of kPa a) Name another set (any point on green line between triple and crit) b) Name a temp & pressure where water sublimes __________

38. Ch13.4 – More Phase diagrams
Phase Diagram - Water
101.3
22,100
374
100
Solid
Liquid
Gas
Pressure
(kPa)
Temperature (C°)
1) What state is H2O at: a) 50°C and 50 kPa ____
b) 75°C and 50 kPa ___ c) 0°C, 25 kPa ____ d) -10°C, 0.5 kPa ____
2) What is a critical point?
3) What is a triple point? b) What is the triple point of H2O? _______
4) What is the boiling point of water? b) What is the normal b.p. of H2O?
5) What is the melting point of H2O? b) What is the normal m.p.?
6) Are there any conditions where H2O sublimes?

39. Plasma
KE of particles becomes so large, motion so radical, that even the electrons get ripped off the atoms.
Left with a bunch of +/- charges.
- Outer space is mostly a plasma because the matter comes from stars (hot)
- Partial plasmas in fluorescent lights, neon signs, lightning bolts, flames.
- Aurora Borealis
- Cold plasmas 50,000K – 100,000K (few gases)
- Stars 10million K – 1billion K
Ch13 HW#4 WS

40. Ch13 HW#4 Worksheet

41. Chapter 14.1 – Behavior of Gases
Factors that affect the behavior of gases:
1) Number of particles - More particles = Higher gas pressure
Double the particles,
Double the pressure

42. Chapter 14.1 – Behavior of Gases
Factors that affect the behavior of gases:
1) Number of particles - More particles = Higher gas pressure
2) Size of container - reducing the size of the container increases pressure
Double the particles,
Double the pressure
Boyle’s Law:
V1.P1 = V2.P2
Big V
Small P
Small V
Big P

43. Chapter 14.1 – Behavior of Gases
Factors that affect the behavior of gases:
1) Number of particles - More particles = Higher gas pressure
2) Size of container - reducing the size of the container increases pressure
3) Temperature - increases temp particles have more KE. To adjust,
the gas must have higher pressure OR must occupy larger volume!
Double the particles,
Double the pressure
Boyle’s Law:
P1.V1 = P2.V2
Big V
Small P
Small V
Big P
Double the temp = double the pressure or double the volume
Must be
in Kelvin!
OC+273 = K
Charles’ Law
Fire

44. Ex 1) A balloon contains 30 L of helium gad at 100kPa
Ex 1) A balloon contains 30 L of helium gad at 100kPa. What is the volume
when the balloon rises to an altitude where the pressure is only 25kPa?
Ex 2) A balloon filled at 27oC had a volume of 4.0L. It is heated to 57oC.
What is the new volume?

45. P1= 100 kPa (100kPa)(30L)=(25kPa)(V2) V1= 30L P2= 25 kPa V2=120L V2= ?
Ex 1) A balloon contains 30 L of helium gad at 100kPa. What is the volume
when the balloon rises to an altitude where the pressure is only 25kPa?
P1V1 = P2V2
P1= 100 kPa (100kPa)(30L)=(25kPa)(V2)
V1= 30L
P2= 25 kPa V2=120L
V2= ?
Ex 2) A balloon filled at 27oC had a volume of 4.0L. It is heated to 57oC.
What is the new volume?
T1= 27oC K
V1 = 4.0L
T2 = 57oC K
V2 = ?
V2 = 4.4L

46. Ex 3) The gas left in a used aerosol can is at a pressure
of 100kPa at 27oC. If it is thrown into a fire, what will
the pressure be if it reaches a temp of 927oC?
Ch14 HW#1 1 – 6

47. Ex 3) The gas left in a used aerosol can is at a pressure
of 100kPa at 27oC. If it is thrown into a fire, what will
the pressure be if it reaches a temp of 927oC?
P1 = 100kPa
T1 = 27oC K
P2 = ?
T2 = 927oC K
P2 = 400 kPa
Ch14 HW#1 1 – 6

48. CH 14 HW#1 1-6
1. Gas occupies 2.5L when at 100 kPa. If pressure changes
to 40 kPa, volume? Piston in or out?
V1 = 2.5L V2 = ?
P1 = 100kPa P2 = 40kPa
2. Gas occupies 2.5L when at 100 kPa. If pressure changes
to 250 kPa, volume? Piston in or out?
V1 = 2.5L V2 = ?
P1 = 100kPa P2 = 250kPa

49. CH 14 HW#1 1-6
1. Gas occupies 2.5L when at 100 kPa. If pressure changes
to 40 kPa, volume? Piston in or out?
V1 = 2.5L V2 = ?
P1 = 100kPa P2 = 40kPa
V2 = 6.5L (OUT)
2. Gas occupies 2.5L when at 100 kPa. If pressure changes
to 250 kPa, volume? Piston in or out?
V1 = 2.5L V2 = ?
P1 = 100kPa P2 = 250kPa

50. CH 14 HW#1 1-6
1. Gas occupies 2.5L when at 100 kPa. If pressure changes
to 40 kPa, volume? Piston in or out?
V1 = 2.5L V2 = ?
P1 = 100kPa P2 = 40kPa
V2 = 6.5L (OUT)
2. Gas occupies 2.5L when at 100 kPa. If pressure changes
to 250 kPa, volume? Piston in or out?
V1 = 2.5L V2 = ?
P1 = 100kPa P2 = 250kPa
V2 = 1L (IN)

51. 3. Gas occupies 6.8L when at 327°C.
Temp drops to 27°C, volume? in / out?
V1 = 6.8L V2 = ?
T1 = 327°C = 600K T2=300K
4. Gas occupies 6.8L when at 327°C. Temp rises to 427°C,
volume? in / out?
V1 = 6.8L V2 = ?
T1 = 327°C = 600K T2 = 427°C = 700K

52. 3. Gas occupies 6.8L when at 327°C.
Temp drops to 27°C, volume? in / out?
V1 = 6.8L V2 = ?
T1 = 327°C = 600K T2=300K
V2 = 3.4L (IN)
4. Gas occupies 6.8L when at 327°C. Temp rises to 427°C,
volume? in / out?
V1 = 6.8L V2 = ?
T1 = 327°C = 600K T2 = 427°C = 700K

53. 3. Gas occupies 6.8L when at 327°C.
Temp drops to 27°C, volume? in / out?
V1 = 6.8L V2 = ?
T1 = 327°C = 600K T2=300K
V2 = 3.4L (IN)
4. Gas occupies 6.8L when at 327°C. Temp rises to 427°C,
volume? in / out?
V1 = 6.8L V2 = ?
T1 = 327°C = 600K T2 = 427°C = 700K
V2 = 7.9L (OUT)

54. 5. Gas occupies fixed volume, at pressure of 6.58kPa
at 540K. Cooled to 210K, pressure?
P1 = 6.58kPa P2 = ?
T1 = 540K T2 = 210K

55. 5. Gas occupies fixed volume, at pressure of 6.58kPa
at 540K. Cooled to 210K, pressure?
P1 = 6.58kPa P2 = ?
T1 = 540K T2 = 210K
P2 = 2.56kPa
6. Why do aerosol cans say “Do Not Incinerate”?

56. 5. Gas occupies fixed volume, at pressure of 6.58kPa
at 540K. Cooled to 210K, pressure?
P1 = 6.58kPa P2 = ?
T1 = 540K T2 = 210K
P2 = 2.56kPa
6. Why do aerosol cans say “Do Not Incinerate”?
Fixed volume!
Temp = Pressure = explosion!

57. Ch14 HW#2 7 – 17
7) A sealed container with a movable piston contains a gas
that occupies a volume when at a pressure. If the pressure
increases, does the volume increase or decrease?
P1V1 = P2V2
8) A sealed container with a movable piston contains a gas
that occupies a volume when at a temp. If the temp increases,
does the volume increase or decrease?
9) A sealed container occupies a volume when at a pressure
& temp. If temp increases, what happens to pressure? . .

58. 10) A sealed container with a movable piston occupies 10L
at 10.0kPa. If a pressure changes to standard pressure,
volume? in/out?
V1= 10.0L V2=
P1= 10kPa P2= 101.3kPa
11) A sealed container with a movable piston contains a gas
that occupies 10.0L when at 100°C. Temp changes to
standard temp, volume?
V1 = 10.0L V2 = ?
T1 = 100°C = 373K T2= 0°C = 273K
12) fixed volume of gas at STP. Find pressure if temp
changes to 373K?
P1 = 101.3kPa P2 = ?
T1 = 273K T2 = 373K

59. 10) A sealed container with a movable piston occupies 10L
at 10.0kPa. If a pressure changes to standard pressure,
volume? in/out?
V1= 10.0L V2= V1.P1 = V2.P2
P1= 10kPa P2= 101.3kPa (10L)(10kPa)=V2(101.3kPa)
V2 = .987L
11) A sealed container with a movable piston contains a gas
that occupies 10.0L when at 100°C. Temp changes to
standard temp, volume?
V1 = 10.0L V2 = ?
T1 = 100°C = 373K T2= 0°C = 273K
12) fixed volume of gas at STP. Find pressure if temp
changes to 373K?
P1 = 101.3kPa P2 = ?
T1 = 273K T2 = 373K

60. 10) A sealed container with a movable piston occupies 10L
at 10.0kPa. If a pressure changes to standard pressure,
volume? in/out?
V1= 10.0L V2= V1.P1 = V2.P2
P1= 10kPa P2= 101.3kPa (10L)(10kPa)=V2(101.3kPa)
V2 = .987L
11) A sealed container with a movable piston contains a gas
that occupies 10.0L when at 100°C. Temp changes to
standard temp, volume?
V1 = 10.0L V2 = ?
T1 = 100°C = 373K T2= 0°C = 273K
V2= 7.3L
12) fixed volume of gas at STP. Find pressure if temp
changes to 373K?
P1 = 101.3kPa P2 = ?
T1 = 273K T2 = 373K

61. 10) A sealed container with a movable piston occupies 10L
at 10.0kPa. If a pressure changes to standard pressure,
volume? in/out?
V1= 10.0L V2= V1.P1 = V2.P2
P1= 10kPa P2= 101.3kPa (10L)(10kPa)=V2(101.3kPa)
V2 = .987L
11) A sealed container with a movable piston contains a gas
that occupies 10.0L when at 100°C. Temp changes to
standard temp, volume?
V1 = 10.0L V2 = ?
T1 = 100°C = 373K T2= 0°C = 273K
V2= 7.3L
12) fixed volume of gas at STP. Find pressure if temp
changes to 373K?
P1 = 101.3kPa P2 = ?
T1 = 273K T2 = 373K
P2 = 138kPa

62. 13) Cylinder with moveable piston at 200kPa and 500mL.
Find volume at standard pressure.
14)Cylinder with moveable piston temp of 300°C volume
of 500mL. Find volume if temp corrected to standard temp.
15) Hot air balloon contains 2000L of hot gas at standard
pressure. Find volume when at 50 kPa?

63. 13) Cylinder with moveable piston at 200kPa and 500mL.
Find volume at standard pressure.
P1 = 200kPa P2 = 101.3kPa V1.P1 = V2.P2
V1 = 500mL V2 = ? (500mL)(200kPa) = V2(101.3kPa)
V2 = ____ mL
14)Cylinder with moveable piston temp of 300°C volume
of 500mL. Find volume if temp corrected to standard temp.
15) Hot air balloon contains 2000L of hot gas at standard
pressure. Find volume when at 50 kPa?

64. 13) Cylinder with moveable piston at 200kPa and 500mL.
Find volume at standard pressure.
P1 = 200kPa P2 = 101.3kPa V1.P1 = V2.P2
V1 = 500mL V2 = ? (500mL)(200kPa) = V2(101.3kPa)
V2 = ____ mL
14)Cylinder with moveable piston temp of 300°C volume
of 500mL. Find volume if temp corrected to standard temp.
T1 = 300°C = 573K T2 = 273K
V1 = 500mL V2 = ?
V2 = 238mL
15) Hot air balloon contains 2000L of hot gas at standard
pressure. Find volume when at 50 kPa?

65. 13) Cylinder with moveable piston at 200kPa and 500mL.
Find volume at standard pressure.
P1 = 200kPa P2 = 101.3kPa V1.P1 = V2.P2
V1 = 500mL V2 = ? (500mL)(200kPa) = V2(101.3kPa)
V2 = ____ mL
14)Cylinder with moveable piston temp of 300°C volume
of 500mL. Find volume if temp corrected to standard temp.
T1 = 300°C = 573K T2 = 273K
V1 = 500mL V2 = ?
V2 = 238mL
15) Hot air balloon contains 2000L of hot gas at standard
pressure. Find volume when at 50 kPa?
V1=2000L V2 = ? V1.P1 = V2.P2
P1=101.3kPa P2 = 50kPa (2000L)(101.3kPa)=V2(50kPa)
V2 = 4052L

66. 16) V1 = 244mL T1 = 96.2°C = 369.2K
V2 = ? T2 = 10°C = 283K
17) How much water was sucked up into the flask?

67. 16) V1 = 244mL T1 = 96.2°C = 369.2K
V2 = ? T2 = 10°C = 283K
V2 = 187mL
17) How much water was sucked up into the flask?
244mL - 187mL = 57mL

68. Lab14.1 – Charles’ Law
- due tomorrow
- Ch14 HW#2 due at beginning of period

69. Ch14.2 – Combined Gas Law
Ex1) The volume of a balloon is 30.0L at 40°C and 150kPa.
What volume will the balloon have at STP?

70. Ch14.2 – Combined Gas Law
Ex1) The volume of a balloon is 30.0L at 40°C and 150kPa.
What volume will the balloon have at STP?
V1 = 30.0L V2 = ?
P1 = 150kPa P2 = 101.3kPa
T1 = 40°C or 313K T2=0°C or 273K
V2 = 38.7L

71. Ex2) The volume of a gas is 10.0L at 75.6kPa and 60°C.
Correct this volume to STP.

72. Ex2) The volume of a gas is 10.0L at 75.6kPa and 60°C.
Correct this volume to STP.
V1 = 10.0L V2 = ?
P1 = 75.6kPa P2 = 101.3kPa
T1 = 60°C or 333K T2 = 0°C or 273K
V2 = 6.12L

73. Ex3) Correct the volume: 1.49L at 18°C and 94.7kPa
to 68°C and 82.4kPa.

74. Ex3) Correct the volume: 1.49L at 18°C and 94.7kPa
to 68°C and 82.4kPa.
V1 = 1.49L V2=?
P1 = 94.7kPa P2=82.4kPa (V )
T1 = 18°C or 291K T2=68°C or 341K (V )
V2 = 2.0L
Ch14 HW#

75. Ch14 HW#3
18) Flask with volume of 300ml at pressure of 200 kPa
and 100°C. Correct to STP.
V1 = 300mL V2 = ?
P1 = 200kPa P2 = 101.3kPa
T1 = 100°C = 373K T2 = 273K
19) Container with initial volume of 1.0L occupied by a gas
at pressure of 150kPa at 25°C. What’s the volume
if pressure = 600kPa and temp raised to 100°C?
V1 = 1.0L V2=?
P1 = 150kPa P2 = 600kPa
T1 = 298K T2 = 373K

76. Ch14 HW#3
18) Flask with volume of 300ml at pressure of 200 kPa
and 100°C. Correct to STP.
V1 = 300mL V2 = ?
P1 = 200kPa P2 = 101.3kPa
T1 = 100°C = 373K T2 = 273K
V2 = 434mL
19) Container with initial volume of 1.0L occupied by a gas
at pressure of 150kPa at 25°C. What’s the volume
if pressure = 600kPa and temp raised to 100°C?
V1 = 1.0L V2=?
P1 = 150kPa P2 = 600kPa
T1 = 298K T2 = 373K

77. Ch14 HW#3
18) Flask with volume of 300ml at pressure of 200 kPa
and 100°C. Correct to STP.
V1 = 300mL V2 = ?
P1 = 200kPa P2 = 101.3kPa
T1 = 100°C = 373K T2 = 273K
V2 = 434mL
19) Container with initial volume of 1.0L occupied by a gas
at pressure of 150kPa at 25°C. What’s the volume
if pressure = 600kPa and temp raised to 100°C?
V1 = 1.0L V2=?
P1 = 150kPa P2 = 600kPa
T1 = 298K T2 = 373K
V2 =.31L

78. 20) 5.0L of gas at STP heated to 150°C and expands to 6.0L,
pressure?
V1 = 5.0L V2 = 6.0L
P1 = 101.3kPa P2 = ?
T1 = 273K T2 = 423K
21) A container contains a gas at a given V,P,T.
How does the volume change if pressure increased 4x greater
& temp half as much?
V1 = V V2 = ?
P1 = P P2 = 4P
T1 = T T2 = .5T

79. 20) 5.0L of gas at STP heated to 150°C and expands to 6.0L,
pressure?
V1 = 5.0L V2 = 6.0L
P1 = 101.3kPa P2 = ?
T1 = 273K T2 = 423K
P2 = 130.8kPa
21) A container contains a gas at a given V,P,T.
How does the volume change if pressure increased 4x greater
& temp half as much?
V1 = V V2 = ?
P1 = P P2 = 4P
T1 = T T2 = .5T

80. 20) 5.0L of gas at STP heated to 150°C and expands to 6.0L,
pressure?
V1 = 5.0L V2 = 6.0L
P1 = 101.3kPa P2 = ?
T1 = 273K T2 = 423K
P2 = 130.8kPa
21) A container contains a gas at a given V,P,T.
How does the volume change if pressure increased 4x greater
& temp half as much?
V1 = V V2 = ?
P1 = P P2 = 4P
T1 = T T2 = .5T
V2 = 1/8 V

81. Ch14.4 – Ideal Gas Law
Pressure, volume, and temp affect each other.
So does the # of particles, n (moles):

82. Ch14.4 – Ideal Gas Law
Pressure, volume, and temp affect each other.
So does the # of particles, n (moles):
P.V = n.R.T
temp in Kelvin
pressure
moles
Ideal Gas Law Constant
volume
Ex1) 1 mole of any gas occupies 22.4 L at STP. Based on this,
what must be the value of R?

83. Ch14.4 – Ideal Gas Law
Pressure, volume, and temp affect each other.
So does the # of particles, n (moles):
P.V = n.R.T
temp in Kelvin
pressure
moles
Ideal Gas Law Constant
volume
Ex1) 1 mole of any gas occupies 22.4 L at STP. Based on this,
what must be the value of R?
n = 1 mole
V = 22.4L
P = 101.3kPa
T = 0°C = 273K

84. Ex 2) A rigid container is filled with 20.0L of nitrogen gas
to a pressure of 20,000 kPa at 27°C.
How many moles of N2 are in the cylinder?
Ex 3) A deep underground cavern contains 2.24x106L
of methane gas at 1500kPa and 42°C, how many moles?
b) How many grams is this?

85. Ex 2) A rigid container is filled with 20.0L of nitrogen gas
to a pressure of 20,000 kPa at 27°C.
How many moles of N2 are in the cylinder?
V = 20.0L
P = 20,000kPa
T = 27°C = 300K
n = ?
Ex 3) A deep underground cavern contains 2.24x106L
of methane gas at 1500kPa and 42°C, how many moles?
V = 2.24x106L
P = 1500kPa
T = 315K
n = ?
B) How many grams is this?
1.3x106 mol CH g CH4 = 2.1x107 g CH4
1 mol CH4
Ch14 HW#

86. Ch14 HW#4 22 – 25
22. If you were to increase the number of particles inside a container
by a hundred times, what do you think it would do to the pressure?
23. When a rigid hollow sphere containing 680 L of helium gas is
heated to 600 K, the pressure of the gas increases to 1800 kPa.
How many moles of helium are in the sphere?

87. Ch14 HW#4 22 – 25
22. If you were to increase the number of particles inside a container
by a hundred times, what do you think it would do to the pressure?
23. When a rigid hollow sphere containing 680 L of helium gas is
heated to 600 K, the pressure of the gas increases to 1800 kPa.
How many moles of helium are in the sphere?

88. Ch14 HW#4 22 – 25
22. If you were to increase the number of particles inside a container
by a hundred times, what do you think it would do to the pressure?
23. When a rigid hollow sphere containing 680 L of helium gas is
heated to 600 K, the pressure of the gas increases to 1800 kPa.
How many moles of helium are in the sphere?

89. 24. A child has a lung capacity of 2.2 L. How many moles of air
do her lungs hold at a pressure of 100 kPa and a normal body temp
of 37ºC? Air is a mixture of mostly O2 and N2, which you may assume
has an average molar mass of 29 g/mol. How many grams of air
are held in the lungs?
25. When a rigid hollow sphere containing 10.0 L of helium gas
is cooled to -200C, the pressure of the gas decreases. If there are
5.0 moles of gas present, what is the pressure of helium in the sphere?

90. 24. A child has a lung capacity of 2.2 L. How many moles of air
do her lungs hold at a pressure of 100 kPa and a normal body temp
of 37ºC? Air is a mixture of mostly O2 and N2, which you may assume
has an average molar mass of 29 g/mol. How many grams of air
are held in the lungs?
0.085 mol air g air
1 mol air = 2.48 g air
25. When a rigid hollow sphere containing 10.0 L of helium gas
is cooled to -200C, the pressure of the gas decreases. If there are
5.0 moles of gas present, what is the pressure of helium in the sphere?

91. 24. A child has a lung capacity of 2.2 L. How many moles of air
do her lungs hold at a pressure of 100 kPa and a normal body temp
of 37ºC? Air is a mixture of mostly O2 and N2, which you may assume
has an average molar mass of 29 g/mol. How many grams of air
are held in the lungs?
0.085 mol air g air
1 mol air = 2.48 g air
25. When a rigid hollow sphere containing 10.0 L of helium gas
is cooled to -200C, the pressure of the gas decreases. If there are
5.0 moles of gas present, what is the pressure of helium in the sphere?

92. You will be taking one of these quizzes tomorrow!
Ch14 Review Quiz – Balancing Equations Name _________
Form A
1. Magnesium oxide reacts with hydrogen fluoride to produce
magnesium fluoride and water vapor.
2. Hydrochloric acid reacts with barium nitrate to produce
nitric acid and barium chloride.
Form B
1. Magnesium chloride reacts with calcium fluoride to produce
magnesium fluoride and calcium chloride.
2. Sulfuric acid reacts with barium nitrate to produce
nitric acid and barium sulfate.

93. 1. Sodium hydroxide reacts with nitric acid to produce
Ch14 Review Quiz Practice
1. Sodium hydroxide reacts with nitric acid to produce
sodium nitrate and water vapor.

94. Ch14 HW#5 26 – 38
26. If you were to cut the size of a container to 10 times smaller,
what do you think it would do to the pressure?
27. In the last problem, if you kept the pressure the same, what would
you have to do to the temperature of the particles?
28. If you were to double the temperature of the particles inside
a container, what do you think it would do to the pressure?

95. 29. If you were to double the temperature of the particles inside
a container, and wanted to keep the pressure constant, what would you
have to do to the volume?
30. Explain why cooling a balloon down causes the size of the balloon
to decrease?
31. A tank of nitrous oxide containing 4.5 liters measured 55 kPa.
The pressure was increased to 83 kPa. What is the volume of gas?

96. 32. A small balloon needs 1250 ml of He in order to rise. A 500 ml
sample of He at 30°C does not rise. To what temp does this sample
need to be heated in order to rise?
33. A gas at 44°C exerts a pressure of 47 kPa. What pressure will be
exerted by the same gas at 26°C?
34. A gas occupies a volume of cm3 at a pressure of 80 kPa
and room temp, 20°C. Correct this volume to STP.
(Rest for HW)

97. 1. Magnesium oxide reacts with hydrogen fluoride to produce
Ch14 Review Quiz – Balancing Equations Name _________
Form A
1. Magnesium oxide reacts with hydrogen fluoride to produce
magnesium fluoride and water vapor.
2. Hydrochloric acid reacts with barium nitrate to produce
nitric acid and barium chloride.
Form B
1. Magnesium chloride reacts with calcium fluoride to produce
magnesium fluoride and calcium chloride.
2. Sulfuric acid reacts with barium nitrate to produce
nitric acid and barium sulfate.

98. V = 2.50L P = 101.3kPa T = 0°C = 273K n = ? V1 = 2.50L V2 = ?
Ch14 HW#5 26 – 38 cont.
35. A 2.50 L tank at STP contains pure oxygen. How many moles
of oxygen are in the tank? What is the mass of oxygen in the tank?
V = 2.50L
P = 101.3kPa
T = 0°C = 273K
n = ?
m = ?
36. Lab question: A 2.50 L flask full of air is heated to 96.2°C.
It is removed from the heat source and immediately placed in
a room temp water bath, at 20°C. Water is then sucked up into a flask.
What is the volume of air still in the flask?
V1 = 2.50L V2 = ?
T1 = 96.2°C = 369.2K T2 = 293K

99. V = 2.50L P = 101.3kPa T = 0°C = 273K n = ? 1 mol O2 = 3.58 g O2
Ch14 HW#5 26 – 38 cont.
35. A 2.50 L tank at STP contains pure oxygen. How many moles
of oxygen are in the tank? What is the mass of oxygen in the tank?
V = 2.50L
P = 101.3kPa
T = 0°C = 273K
n = ?
m = ? mol O g O2
1 mol O2 = 3.58 g O2
36. Lab question: A 2.50 L flask full of air is heated to 96.2°C.
It is removed from the heat source and immediately placed in
a room temp water bath, at 20°C. Water is then sucked up into a flask.
What is the volume of air still in the flask?
V1 = 2.50L V2 = ?
T1 = 96.2°C = 369.2K T2 = 293K

100. V = 2.50L P = 101.3kPa T = 0°C = 273K n = ? 1 mol O2 = 3.58 g O2
Ch14 HW#5 26 – 38 cont.
35. A 2.50 L tank at STP contains pure oxygen. How many moles
of oxygen are in the tank? What is the mass of oxygen in the tank?
V = 2.50L
P = 101.3kPa
T = 0°C = 273K
n = ?
m = ? mol O g O2
1 mol O2 = 3.58 g O2
36. Lab question: A 2.50 L flask full of air is heated to 96.2°C.
It is removed from the heat source and immediately placed in
a room temp water bath, at 20°C. Water is then sucked up into a flask.
What is the volume of air still in the flask?
V1 = 2.50L V2 = ?
T1 = 96.2°C = 369.2K T2 = 293K
V2 = 1.99L 

101. V1 = 5.0L V2 = ? P1 = 101.3kPa P2 = 200kPa T1 = 273K T2 = 248K
37. A sample of CO fills a 5.0 L balloon at standard temp and pressure.
What will be the volume of the balloon if temp is lowered to –25°C
and the pressure increased to 200 kPa?
V1 = 5.0L V2 = ?
P1 = 101.3kPa P2 = 200kPa
T1 = 273K T2 = 248K
V2 = 2.3L
g of NH4+ are introduced into a 0.50 L flask at –200°C.
What is the pressure of the gas in kPa?
Hint: You’ll need to first convert 6.00 g of NH4+ to moles. How?
Periodic Table, of course!
V = 0.50L g NH mol NH4+
18.0 g NH = 0.33 mol
T = 73K
P = ?

102. Chemistry – Ch13,14 Review + phase diagrams
1. What is meant by the term elastic collision?
2. How can you raise the average kinetic energy of the water molecules
in a glass of water?
3. Express 545 mm Hg in kilopascals.
4. What is significant about the temperature absolute zero?

103. 5. A cylinder of oxygen gas is cooled from 300 K (27°C) to 150 K (-123°C).
By what factor does the average kinetic energy of the oxygen molecules
in the cylinder decrease?
6. Why does evaporation lower the temperature of a liquid?
7. Explain why increasing the temperature of a liquid increases
its rate of evaporation?
8. Explain how boiling is a cooling process.

104. 9. What is the crystal lattice of a solid?
10. A metal cylinder contains 1mol of nitrogen gas at STP.
What will happen to he pressure if another mole of gas is added
to the cylinder, but the temp and volume stay the same?
11. If a gas is compressed from 4.0L to 1.0L and the temp stays constant,
what happens to the pressure?

105. 12. The gas in a container has a pressure of 300kPa at 27C.
What will be the pressure if the temp is lowered to –173C?
13. Five liters of air at –50C is warmed to 100C.
What is the new volume if the pressure remains constant?
14. A 5.0L sample of air at a temp of –50C has a pressure of 107 kPa.
What is the new pressure if the temp is raised to 100C and the volume
expands to 7.0L?

106. 15. A 5.00L flask at 25C contains 0.200 mol of Cl2.
What is the pressure of the flask?
16. What volume will 12.0g of oxygen gas occupy at 25C
and a pressure of 52.7 kPa?

107. Phase Diagram - Water
101.3
22,100
374
100
Solid
Liquid
Gas
Pressure
(kPa)
Temperature (C°)
1) Determine: a) the critical temp for water b) critical pressure
c) triple point temp d) triple point pressure e) normal melting point
f) normal boiling point
2) What is the physical state at:
a)50°C and 0.1kPa b) 105°C and 1000kPa