1. KOIKE SEMI AUTOMATIC PORTABLES FOR SHIPYARDS

2. MARKET LEADER WHY?
Most versatile portable cutting program available nowadays
Each cutting application we have a portable solution
Multiple power supply
Robust
Low maintenance
Long life time
High quality

3. HIGHER PRODUCTION AT LOWER COST!!
SEMI Automation WHY?
Improve quality (constant)
Increase speed (higher productivity)
Less or No after work
Physical easiness operator
Flexible & multiple function
Easy to use (no need for high skilled personnel)
HIGHER PRODUCTION AT LOWER COST!!

4. Portable machines for portables
Handy Auto / Handy Auto Plus
IK-92PUMA
IK-12Max3
IK-72T
IK-05 LUG CUT
WelHandy Multi

5. Handy Auto / Handy Auto Plus

6. Features Automatic igniting/extinguishing system
Safety valves maintaining the preset flow-condition of pre-heat oxygen and fuel gas. No re-adjustment.
Cutting Versatility: Straight line, Circle, Shape cutting and Bevel cutting
Easy to handle, and Highly efficient performance
Machine automatically starts when cutting oxygen is turned on.
Driving wheel rotates full 360°
All-direction cutting is possible.
Wheels can be changed in a moment
Step less speed regulator
Constant cutting height

7. Outline of Ignition Unit
Release Button
Ignition Nozzle
Control Lever
for Gas flow and Ignition
Ignition Nozzle
Control Lever

8. Adjusting procedure of igniting
Pull the lever inside first
before initial adjustment of flame.
Next

9. Ignite procedure ①
① Pull the lever inside more, then pilot flame is made out of igniting nozzle
② Open the fuel gas and oxygen valve a little
③ The fuel gas out of cutting nozzle will ignite.
④ Adjust the flame ② ④ ④ ③

10. Adjust the flame ④ Open the oxygen valve a little
Pre-heat oxygen valve ④
⑤ Adjust each gas flow
Fuel gas valve
Valve condition can be locked after adjusting each gas flow.
⑥ Get qualified flame

11. The fire goes out only with pushing of the release button.
Extinguish the flame
Release button
The fire goes out only with pushing of the release button.
Push

12. Re-ignition by only the lever operation
RE-ignite
Pull the lever inside
Re-ignition by only the lever operation

13. Igniting ←→ Extinguishing
Push the release button
Pull the lever inside
Extinguishing

14. Small circle cutting ① Setting a radius of circle ⑤ Cutting the circle
② Put on the plate
③ Igniting
④ Heating a piercing point

15. Specifications Input power AC 110-240V Cutting thickness 5～30 mm
Speed range 150～700 mm/min
Wheel drive Friction drive
Cutting tip Type 102 or 106
Weight kg

16. Handy Auto PLUS Kit 1) Main unit 1 2) Square cutting attachment 1
3) Auxiliary wheel for square cutting attachment 1
4) Beveling wheel 1
5) Small circle cutting attachment 1
6) Manual guide lever 1
7) Cutting tips, either type 102, or type 106; #0, #1, #2 1 each
8) Spanner for changing tip 1
9) Fuse (1A) 1
10) Carrying case (steel) 1

17. Standard Attachment - 1
1. Auxiliary wheel for square cutting attachment

18. Standard Attachment - 2
2. Beveling wheel (22° ～ 45°)

19. Standard Attachment - 3
3. Small circle cutting attachment (φ30～φ200mm)

20. Standard Attachment - 4
4. Manual guide lever

21. Optional Attachment - 1
1. Guide rail for straight line cutting

22. Optional Attachment - 2
2. Large circle cutting attachment (φ127～480mm)

23. Attachments can be changed in a moment
The Handy Auto Plus can be set up for any type of cutting in a moment.
Changing between any of the versatile attachments is a one-hand operation.

24. Cutting Versatility

25. All types of cutting in any shape possible
1. Straight line cutting
2. Beveling

26. All types of cutting in any shape possible
3. Curved line cutting Circular cutting
5. A curved steel plate

27. All types of cutting in any shape possible
6. “U”　shape bar Square pipe
8. H-shaped steel bar

28. All types of cutting in any shape possible
9. Pipe cutting
10. Slot cutting vertical surface

29. Practical example

30. IK-92 PUMA

31. IK-92 Puma is a unique handy-type machine enabling both highly accurate automatic straight-line cutting and semi-automatic (manually guided / circular) cutting with one hand.

32. The IK-92 Puma is the most economical machine for cutting automatically straight lines.
For the great accuracy the machine is using a rail for guiding.
The rail (1800mm) can be extended to any desired length!! For saving weight the rail is made will holes.

33. Features IK-92PUMA Low center of gravity,
Therefore, stability is extremely high and automatic traveling can be done exactly with no need for manual holding.
Accurate and reliable drive system,
IC for speed control is equipped, thus constant and accurate machine travel is performed.
One-hand operation system making operations easier,
One hand, which holds the grip, can operate the power switch, clutch lever, speed adjustment dial and forward/reverse travel selector switch.

34. Features IK-92PUMA Bevel cutting Perfect heat prevention system,
Beveling is possible up to 45°.
Perfect heat prevention system,
Long and continuous operation is allowed due to heat insulation inside the machine body, double shield plate and a forced air cooling fan. This enhanced the durability and service life.

35. Features IK-92PUMA Secure and easily adjustable torch holder,
Contra weight for more stability,
Easy handle for switching cutting oxygen,
Travel in both forward and reverse direction,
Circle cutting option mm radius,
Plate edge roller, (cutting without rail)

36. Manual guide cutting
Let the machine run only by the drive motor (do not push or pull the machine) and give the machine only the direction by the hand. Take care that the hand actions are done smoothly.
Outside cuts (increase speed).
Inside cuts (decrease speed).
Tip.

37. Circle cutting attachment
This option provides an easy cut of a circles from mm.
Note: Make a deep punch mark on the plate.

38. Plate edge guide roller
This option make it possible to cut without rail.
The setup with the plate edge roller is different!! Take care that the IK-92 Puma has a small inclination so that the roller keep pushing against the plate edge.

39. Specifications Cutting thickness: up to 100mm
Cutting speed: 150 – 1000 mm/min
Cutting shape: I, V to 45°
Power: 42/110/220V AC
Speed regulator: Variable resistor
Weight: 8 Kg
Machine length 480mm

40. IK-12MAX3

41. Features Best portable track cutting machine on current market!
Heavy Duty design
Great stability because of low center of gravity and wide machine body
Most versatile portable machine on the market able to us for oxyfuel cutting, plasma cutting and welding!
Can cut up to 600mm. (Oxyfuel)
Double cone system for smooth movement. (for best cut quality)
Excellent heat protection, inside and outside
Standard (800mm/min) and High Speed model (2400mm/min)

42. Double cone system

43. S-100 torch kit S-100 torch kit for I or V bevel cutting One torch
Up to 100mm
Vertical adjustment of 80mm
Bar of 350mm.

44. S-200 torch kit S-200 torch kit for I, V, X or Y bevel cutting
Two torches
Up to 100mm
Vertical adjustment of 80mm
Bar of 500mm.
Contra weight for stability.

45. SP-100 and SP-200 torch kit
Same as S-100 and S-200 expect this torch kit has a floating head for maintaining distance from nozzle to plate.
Constant height is important when making any bevel. V, X, Y or K bevel.

46. SP-300 torch kit Bevel block using two torches for Y and X bevel.
Bevel block will ensure better bevel accuracy as separate torch regulations.

47. SP-400 torch kit Bevel block using three torches for Y, X and K bevel.
Bevel block will ensure better bevel accuracy as separate torch regulations.

48. Set-up multiple torch
When cutting with multiple torches for beveling a different set-up is necessary.

49. L-100 torch kit Thick plate cutting. Up to 300mm
Bigger hose diameter (3/8”) for correct flow
Torch need water cooling

50. EPOCH 300/600 torch kit Thick plate cutting Up to 600mm.
Distribution unit with gauge
Propane only
Special EPOCH nozzles
Torch need water cooling

51. CUTTING WITH EPOCH

52. Welding torch kit Special torch kit capable of holding any welding gun
Good choice when doing butt welding

53. FR-III controller Can be used for plasma cutting or welding.
Switch on plasma or welding source automatically (Synchronize)
Limit switch for further automation.
Arc stabilization timer.

54. WU-2 Weaving unit Wu-2 switch on IK12max3 Able to weave up to 25mm
Parameters can be adjusted on the “fly”
Parameters:
Origin “0” point
Width 3-25mm,
Frequency 2-120Hz
Dwell left, center right
0-3s

55. Plasma cutting torch kit
Bar 350mm
Torch holder with 80mm height adjustment
Able to hold max torch diameter of 50mm
With bushings different torch diameters can be used 35, 32, 30 or 28mm.

56. Practical Plasma cutting