1. The NEW SmartMonitor Wiring Devices
E-Cart2 & e-Cart Jr.
UL Listing
&
The NEW SmartMonitor Wiring Devices

2. E-Cart2 and e-Cart Jr.
e-Cart Jr
e-Cart2
UL Listing Do’s and Don’ts

3. Question # 1

4. UL Listing Do’s and Don’ts
FRAME:
Listed e-Cart Jrs must all be built on the aluminum frame.
This frame is NOT required to be powder coated.
The standard hand truck construction is NOT acceptable.
Stainless Steel would be acceptable.
Listed e-Carts must be built on the “4 wheel” steel frame (G90 coating). No visible change from before.
Any other sheet metal, plates, or other ferrous metal on the cart needs to be powder coated with one of the approved paints on the list.
Paint certifications are required for all of it.
Other custom designs are not Listed. Customer specific designs of frames are not Listed.
THE UL MARK LABEL:
The listing label is a purchased UL serialized label affixed to the nameplate.
We have UL in the USA only. We are tested to UL1640 for Construction Site Use.
No Canadian certification at this time. Canada has no such reciprocal standard providing general coverage. Specific model-by-model coverage is available in Canada per CSA C22.2 No “General Use Power Supplies”.
Lot blessings by CSA, QPS, etc are available on a per-lot basis.
Also, each cart is required to have a voltage and current rating, and this rating must be marked on the cart. We use engraved metal plates riveted to the unit.
All other materials in both carts are to be listed and suitable for outdoor use. Wire, cable, conduit, conduit fittings, crimps, hole plugs, ground & neutral bars, essentially everything except hardware.
UL Listing Do’s and Don’ts

5. Question # 2

6. Question # 3

7. UL Listing Do’s and Don’ts
Max transformer & kVA for Ecart Jr is 15kVA, same voltage ratings. Transformer must have an outdoor-acceptable rating such as NEMA 3, 3R, 3S, 4, 4X, 6, or 6P.
Secondary Panel:
All receptacles are required to have a spring closing or gravity closing weatherproof covers.
The “COMBO” enclosure rain lid covers everything under the rain flip cover.
Other receptacles need to have rain flip covers, including camloks.
The only typical construction that is not permitted is hanging pigtail connectors. Hanging pigtail connectors are 1) prohibited by the standard, and 2) have no self closing flip lids. This removes the PL / PM series of e-cart Jrs.
Secondary main breaker is permitted, optional.
Appropriate secondary breakers must be provided on all secondary receptacles. Branch Circuit protection per NEC.
Secondary receptacles must be Listed and weather protected. They may be mounted on a panel if of suitable type or may be mounted within any enclosure on the cart, such as the “Combo”, or within the transformer, edge of panelboard, dedicated enclosure, etc.
GFCI breaker, GFCI receptacle, or 1075-style GFCI must be provided for all 125V 15, 20 & 30A receptacles. ALL other receptacles that are not GFCI protected must be marked “Not GFCI protected”.
Open neutral protection GFI is not required on e-Carts because the entire system through the isolation transformer is controlled. No chance of a lifted neutral wire from the transformer (unless tampered with).
UL Listing Do’s and Don’ts

8. Question # 4

9. UL Listing Do’s and Don’ts
All listed EC2s and Jrs must have either an inlet blunt pigtail or an inlet connector such as in IEC inlet, CS inlet, or Camlok panel.
6ft is standard – custom lengths are acceptable.
It is no longer permitted to have "wired by customer" type connection.
If the pigtail is provided, the plug on the end is optional.
A main AC switch is required. It can be a fused disconnect, a separate molded case breaker in a box, or a main breaker installed in a 480V panel.
A primary side 480v panelboard is permitted, optional.
Primary side 480 Volt receptacles are permitted, optional, must be Listed, rain protected as described above. Must be breaker protected. Must be marked “Not GFCI Protected”. Not much room for that on the e-Cart Jr.
All 10” dia wheels and standard legs are permitted.
UL Listing Do’s and Don’ts

10. UL Listing Do’s and Don’ts
Custom e-Cart Jr
Can this unit be UL listed?

11. Custom e-Cart2
Can this unit be UL listed?
UL Listing Do’s and Don’ts

12. 5 Easy Steps to Temp Power
How to determine the right Temp Power Product
Step 1 – Determine the NEED
( Distribute or Transform)
Step 2 – Determine the AVAILABLE POWER
- Volts Amps Phase
Step 3 – Determine the
EXPECTED ELECTRICAL OUTPUT

13. Step 4 – Determine the CONNECTIONS
How will they connect in and out ?
Be specific
Use NEMA values (ie L5-20)
Volts amps phase expected
Step 5 – Determine the BUDGET

14. Quoting Temp Power Details, details, details – ask, ask, ask
Avoid shopping list quotes for similar items
Know the basic “bucket $” for temp power
Specific details can change everything
Get all the info before RFQ
More than 50% of RFQs lack IMPORTANT details to provide a quick accurate quote.

15. Web Based Tools for e-Cart Temp Power Selection

16. PART II
SMARTMONITOR

17. SmartMonitor™ Devices
Connector
1610-CW6PL
Plug
1510-PW6PL

18. Using the Smartmonitor™
Only TWO color “GCM” type available
Not single amber on/off

19. HOW IT WORKS A B C D

20. Nickel plated solid brass blades resist wear and corrosion
Clear silicone mix material allows 360° indication from LEDs
EZ Cord Grip Nut holds over 35 lb UL NRTL pull test
Each device comes with 4 sizes of grommets for superior sealing around cord jacket
SmartMonitor module is attached to plug body assembly
State of the art super bright LEDs and shock proof Mil grade circuit board
Color coded combo drive screws for wire termination
Sealing rings mate to Female PermaTite2 devices and FS/PWDX Receptacles.
NEMA 6P Submersible Tested by UL

21. COATED SHOCK and IMPACT RESISTANT STATE-OF-THE-ART SMD CIRCUITRY
DEEP OPEN WIRE INSERTION POCKETS
CIRCUIT BOARD MARKED FOR EASY ID
BLUE COLORED BODY FOR
SMARTMONITOR SERIES
CLEAR WIRE BRIDGE FOR EASY VISUAL INSPECTION
COLOR CODED
TRI DRIVE COMBO SCREWS

22. OSHA & Smartmonitor™ Assured Equipment Ground Continuity Program
CFR
OSHA Letter dtd 12/1/1991 allows the use of “GCM” type devices to aid with the Assured Equipment Ground Continuity Program.

23. “…This is in response to your September 5 facsimile of a letter dated March 25 concerning the use of the Ericson Manufacturing Company's ground continuity monitoring device.
In regard to your question whether ground continuity monitoring devices provide compliance with 29 CFR (b)(1)(iii)(D), (E), and (G), please be advised as follows: These provisions require that (1) all cord sets and receptacles that are not a part of permanent wiring, and cord and plug-connected equipment required to be grounded must have all equipment grounding conductors tested for continuity and each receptacle and attachment cap or plug must be tested for correct attachment of equipment grounding conductor; (2) the tests be performed on a periodic basis; and (3) the tests be recorded.
A ground continuity tester permanently wired to a cord set's receptacle can be used to comply with the requirements to test the cord to which it is wired ( (b)(1)(iii)(D) and (E)). This is based on the assumption that all cord connectors used on the site would incorporate the tester or would otherwise be tested in compliance with the ground-fault protection standard…”
“…The employer would have to ensure that cord sets identified by the device as having a defective grounding conductor are immediately removed from service…”

24. Question # 5

25. Question # 6

26. REP SmartMonitor Sample Cord
Order p/n PW6PL-DEMO
Caution: NOT FOR SALE – wired without a ground to show RED indication.

27. Rep Launch Kit Flyers Video Red/Blue Demo Cord Ericson YouTube Channel
“ Ericson Information Zone”

28. Are you a follower? Follow Ericson on Twitter…
Send txt to number 40404
follow ericsonmfg
You will receive a tweet back confirming you are following…
Distributors / Electricians / Industry Pros

29. END OF SESSION